arm64: dts: imx8mq-evk: Adjust nodes following alphabetical sort

Adjust some nodes to make them follow alphabetical sort except
iomuxc node which is put at the end of file because of its huge
pinctrl data.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 0595812..6ede46f 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -115,15 +115,6 @@
        };
 };
 
-&sai2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_sai2>;
-       assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
-       assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
-       assigned-clock-rates = <0>, <24576000>;
-       status = "okay";
-};
-
 &gpio5 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_wifi_reset>;
@@ -242,6 +233,29 @@
        power-supply = <&sw1a_reg>;
 };
 
+&qspi0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_qspi>;
+       status = "okay";
+
+       n25q256a: flash@0 {
+               reg = <0>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "micron,n25q256a", "jedec,spi-nor";
+               spi-max-frequency = <29000000>;
+       };
+};
+
+&sai2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_sai2>;
+       assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
+       assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+       assigned-clock-rates = <0>, <24576000>;
+       status = "okay";
+};
+
 &snvs_pwrkey {
        status = "okay";
 };
@@ -261,20 +275,6 @@
        status = "okay";
 };
 
-&qspi0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_qspi>;
-       status = "okay";
-
-       n25q256a: flash@0 {
-               reg = <0>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "micron,n25q256a", "jedec,spi-nor";
-               spi-max-frequency = <29000000>;
-       };
-};
-
 &usdhc1 {
        pinctrl-names = "default", "state_100mhz", "state_200mhz";
        pinctrl-0 = <&pinctrl_usdhc1>;