--- /dev/null
+/*
+ * Common boot and setup code for both 32-bit and 64-bit.
+ * Extracted from arch/powerpc/kernel/setup_64.c.
+ *
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/ide.h>
+#include <linux/seq_file.h>
+#include <linux/ioport.h>
+#include <linux/console.h>
+#include <linux/utsname.h>
+#include <linux/tty.h>
+#include <linux/root_dev.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
+#include <linux/unistd.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/bootinfo.h>
+#include <asm/smp.h>
+#include <asm/elf.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/cputable.h>
+#include <asm/sections.h>
+#include <asm/btext.h>
+#include <asm/nvram.h>
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/rtas.h>
+#include <asm/iommu.h>
+#include <asm/serial.h>
+#include <asm/cache.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/lmb.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+/*
+ * This still seems to be needed... -- paulus
+ */
+struct screen_info screen_info = {
+ .orig_x = 0,
+ .orig_y = 25,
+ .orig_video_cols = 80,
+ .orig_video_lines = 25,
+ .orig_video_isVGA = 1,
+ .orig_video_points = 16
+};
+
+#ifdef __DO_IRQ_CANON
+/* XXX should go elsewhere eventually */
+int ppc_do_canonicalize_irqs;
+EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
+#endif
+
+/* also used by kexec */
+void machine_shutdown(void)
+{
+ if (ppc_md.nvram_sync)
+ ppc_md.nvram_sync();
+}
+
+void machine_restart(char *cmd)
+{
+ machine_shutdown();
+ ppc_md.restart(cmd);
+#ifdef CONFIG_SMP
+ smp_send_stop();
+#endif
+ printk(KERN_EMERG "System Halted, OK to turn off power\n");
+ local_irq_disable();
+ while (1) ;
+}
+
+void machine_power_off(void)
+{
+ machine_shutdown();
+ ppc_md.power_off();
+#ifdef CONFIG_SMP
+ smp_send_stop();
+#endif
+ printk(KERN_EMERG "System Halted, OK to turn off power\n");
+ local_irq_disable();
+ while (1) ;
+}
+/* Used by the G5 thermal driver */
+EXPORT_SYMBOL_GPL(machine_power_off);
+
+void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL_GPL(pm_power_off);
+
+void machine_halt(void)
+{
+ machine_shutdown();
+ ppc_md.halt();
+#ifdef CONFIG_SMP
+ smp_send_stop();
+#endif
+ printk(KERN_EMERG "System Halted, OK to turn off power\n");
+ local_irq_disable();
+ while (1) ;
+}
+
+
+#ifdef CONFIG_TAU
+extern u32 cpu_temp(unsigned long cpu);
+extern u32 cpu_temp_both(unsigned long cpu);
+#endif /* CONFIG_TAU */
+
+#ifdef CONFIG_SMP
+DEFINE_PER_CPU(unsigned int, pvr);
+#endif
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ unsigned long cpu_id = (unsigned long)v - 1;
+ unsigned int pvr;
+ unsigned short maj;
+ unsigned short min;
+
+ if (cpu_id == NR_CPUS) {
+#if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
+ unsigned long bogosum = 0;
+ int i;
+ for (i = 0; i < NR_CPUS; ++i)
+ if (cpu_online(i))
+ bogosum += loops_per_jiffy;
+ seq_printf(m, "total bogomips\t: %lu.%02lu\n",
+ bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
+#endif /* CONFIG_SMP && CONFIG_PPC32 */
+ seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
+
+ if (ppc_md.show_cpuinfo != NULL)
+ ppc_md.show_cpuinfo(m);
+
+ return 0;
+ }
+
+ /* We only show online cpus: disable preempt (overzealous, I
+ * knew) to prevent cpu going down. */
+ preempt_disable();
+ if (!cpu_online(cpu_id)) {
+ preempt_enable();
+ return 0;
+ }
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_PPC64 /* XXX for now */
+ pvr = per_cpu(pvr, cpu_id);
+#else
+ pvr = cpu_data[cpu_id].pvr;
+#endif
+#else
+ pvr = mfspr(SPRN_PVR);
+#endif
+ maj = (pvr >> 8) & 0xFF;
+ min = pvr & 0xFF;
+
+ seq_printf(m, "processor\t: %lu\n", cpu_id);
+ seq_printf(m, "cpu\t\t: ");
+
+ if (cur_cpu_spec->pvr_mask)
+ seq_printf(m, "%s", cur_cpu_spec->cpu_name);
+ else
+ seq_printf(m, "unknown (%08x)", pvr);
+
+#ifdef CONFIG_ALTIVEC
+ if (cpu_has_feature(CPU_FTR_ALTIVEC))
+ seq_printf(m, ", altivec supported");
+#endif /* CONFIG_ALTIVEC */
+
+ seq_printf(m, "\n");
+
+#ifdef CONFIG_TAU
+ if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
+#ifdef CONFIG_TAU_AVERAGE
+ /* more straightforward, but potentially misleading */
+ seq_printf(m, "temperature \t: %u C (uncalibrated)\n",
+ cpu_temp(i));
+#else
+ /* show the actual temp sensor range */
+ u32 temp;
+ temp = cpu_temp_both(i);
+ seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
+ temp & 0xff, temp >> 16);
+#endif
+ }
+#endif /* CONFIG_TAU */
+
+ /*
+ * Assume here that all clock rates are the same in a
+ * smp system. -- Cort
+ */
+ if (ppc_proc_freq)
+ seq_printf(m, "clock\t\t: %lu.%06luMHz\n",
+ ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
+
+ if (ppc_md.show_percpuinfo != NULL)
+ ppc_md.show_percpuinfo(m, cpu_id);
+
+ /* If we are a Freescale core do a simple check so
+ * we dont have to keep adding cases in the future */
+ if (PVR_VER(pvr) & 0x8000) {
+ maj = PVR_MAJ(pvr);
+ min = PVR_MIN(pvr);
+ } else {
+ switch (PVR_VER(pvr)) {
+ case 0x0020: /* 403 family */
+ maj = PVR_MAJ(pvr) + 1;
+ min = PVR_MIN(pvr);
+ break;
+ case 0x1008: /* 740P/750P ?? */
+ maj = ((pvr >> 8) & 0xFF) - 1;
+ min = pvr & 0xFF;
+ break;
+ default:
+ maj = (pvr >> 8) & 0xFF;
+ min = pvr & 0xFF;
+ break;
+ }
+ }
+
+ seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
+ maj, min, PVR_VER(pvr), PVR_REV(pvr));
+
+#ifdef CONFIG_PPC32
+ seq_printf(m, "bogomips\t: %lu.%02lu\n",
+ loops_per_jiffy / (500000/HZ),
+ (loops_per_jiffy / (5000/HZ)) % 100);
+#endif
+
+#ifdef CONFIG_SMP
+ seq_printf(m, "\n");
+#endif
+
+ preempt_enable();
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ unsigned long i = *pos;
+
+ return i <= NR_CPUS ? (void *)(i + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+ .start =c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+static int __init set_preferred_console(void)
+{
+ struct device_node *prom_stdout = NULL;
+ char *name;
+ u32 *spd;
+ int offset = 0;
+
+ DBG(" -> set_preferred_console()\n");
+
+ /* The user has requested a console so this is already set up. */
+ if (strstr(saved_command_line, "console=")) {
+ DBG(" console was specified !\n");
+ return -EBUSY;
+ }
+
+ if (!of_chosen) {
+ DBG(" of_chosen is NULL !\n");
+ return -ENODEV;
+ }
+ /* We are getting a weird phandle from OF ... */
+ /* ... So use the full path instead */
+ name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+ if (name == NULL) {
+ DBG(" no linux,stdout-path !\n");
+ return -ENODEV;
+ }
+ prom_stdout = of_find_node_by_path(name);
+ if (!prom_stdout) {
+ DBG(" can't find stdout package %s !\n", name);
+ return -ENODEV;
+ }
+ DBG("stdout is %s\n", prom_stdout->full_name);
+
+ name = (char *)get_property(prom_stdout, "name", NULL);
+ if (!name) {
+ DBG(" stdout package has no name !\n");
+ goto not_found;
+ }
+ spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
+
+ if (0)
+ ;
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ else if (strcmp(name, "serial") == 0) {
+ int i;
+ u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
+ if (i > 8) {
+ switch (reg[1]) {
+ case 0x3f8:
+ offset = 0;
+ break;
+ case 0x2f8:
+ offset = 1;
+ break;
+ case 0x898:
+ offset = 2;
+ break;
+ case 0x890:
+ offset = 3;
+ break;
+ default:
+ /* We dont recognise the serial port */
+ goto not_found;
+ }
+ }
+ }
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
+#ifdef CONFIG_PPC_PSERIES
+ else if (strcmp(name, "vty") == 0) {
+ u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL);
+ char *compat = (char *)get_property(prom_stdout, "compatible", NULL);
+
+ if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) {
+ /* Host Virtual Serial Interface */
+ int offset;
+ switch (reg[0]) {
+ case 0x30000000:
+ offset = 0;
+ break;
+ case 0x30000001:
+ offset = 1;
+ break;
+ default:
+ goto not_found;
+ }
+ of_node_put(prom_stdout);
+ DBG("Found hvsi console at offset %d\n", offset);
+ return add_preferred_console("hvsi", offset, NULL);
+ } else {
+ /* pSeries LPAR virtual console */
+ of_node_put(prom_stdout);
+ DBG("Found hvc console\n");
+ return add_preferred_console("hvc", 0, NULL);
+ }
+ }
+#endif /* CONFIG_PPC_PSERIES */
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+ else if (strcmp(name, "ch-a") == 0)
+ offset = 0;
+ else if (strcmp(name, "ch-b") == 0)
+ offset = 1;
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+ else
+ goto not_found;
+ of_node_put(prom_stdout);
+
+ DBG("Found serial console at ttyS%d\n", offset);
+
+ if (spd) {
+ static char __initdata opt[16];
+ sprintf(opt, "%d", *spd);
+ return add_preferred_console("ttyS", offset, opt);
+ } else
+ return add_preferred_console("ttyS", offset, NULL);
+
+ not_found:
+ DBG("No preferred console found !\n");
+ of_node_put(prom_stdout);
+ return -ENODEV;
+}
+console_initcall(set_preferred_console);
+#endif /* CONFIG_PPC_MULTIPLATFORM */
#include <asm/xmon.h>
#include <asm/time.h>
+#define DBG(fmt...)
+
#if defined CONFIG_KGDB
#include <asm/kgdb.h>
#endif
};
#endif /* CONFIG_VGA_CONSOLE || CONFIG_FB_VGA16 || CONFIG_FB_VESA */
-void machine_restart(char *cmd)
-{
-#ifdef CONFIG_NVRAM
- nvram_sync();
-#endif
- ppc_md.restart(cmd);
-}
-
-void machine_power_off(void)
-{
-#ifdef CONFIG_NVRAM
- nvram_sync();
-#endif
- ppc_md.power_off();
-}
-
-void machine_halt(void)
-{
-#ifdef CONFIG_NVRAM
- nvram_sync();
-#endif
- ppc_md.halt();
-}
-
-void (*pm_power_off)(void) = machine_power_off;
-
-#ifdef CONFIG_TAU
-extern u32 cpu_temp(unsigned long cpu);
-extern u32 cpu_temp_both(unsigned long cpu);
-#endif /* CONFIG_TAU */
-
-int show_cpuinfo(struct seq_file *m, void *v)
-{
- int i = (int) v - 1;
- unsigned int pvr;
- unsigned short maj, min;
- unsigned long lpj;
-
- if (i >= NR_CPUS) {
- /* Show summary information */
-#ifdef CONFIG_SMP
- unsigned long bogosum = 0;
- for (i = 0; i < NR_CPUS; ++i)
- if (cpu_online(i))
- bogosum += cpu_data[i].loops_per_jiffy;
- seq_printf(m, "total bogomips\t: %lu.%02lu\n",
- bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
-#endif /* CONFIG_SMP */
-
- if (ppc_md.show_cpuinfo != NULL)
- ppc_md.show_cpuinfo(m);
- return 0;
- }
-
-#ifdef CONFIG_SMP
- if (!cpu_online(i))
- return 0;
- pvr = cpu_data[i].pvr;
- lpj = cpu_data[i].loops_per_jiffy;
-#else
- pvr = mfspr(SPRN_PVR);
- lpj = loops_per_jiffy;
-#endif
-
- seq_printf(m, "processor\t: %d\n", i);
- seq_printf(m, "cpu\t\t: ");
-
- if (cur_cpu_spec->pvr_mask)
- seq_printf(m, "%s", cur_cpu_spec->cpu_name);
- else
- seq_printf(m, "unknown (%08x)", pvr);
-#ifdef CONFIG_ALTIVEC
- if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC)
- seq_printf(m, ", altivec supported");
-#endif
- seq_printf(m, "\n");
-
-#ifdef CONFIG_TAU
- if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
-#ifdef CONFIG_TAU_AVERAGE
- /* more straightforward, but potentially misleading */
- seq_printf(m, "temperature \t: %u C (uncalibrated)\n",
- cpu_temp(i));
-#else
- /* show the actual temp sensor range */
- u32 temp;
- temp = cpu_temp_both(i);
- seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
- temp & 0xff, temp >> 16);
-#endif
- }
-#endif /* CONFIG_TAU */
-
- if (ppc_md.show_percpuinfo != NULL)
- ppc_md.show_percpuinfo(m, i);
-
- /* If we are a Freescale core do a simple check so
- * we dont have to keep adding cases in the future */
- if (PVR_VER(pvr) & 0x8000) {
- maj = PVR_MAJ(pvr);
- min = PVR_MIN(pvr);
- } else {
- switch (PVR_VER(pvr)) {
- case 0x0020: /* 403 family */
- maj = PVR_MAJ(pvr) + 1;
- min = PVR_MIN(pvr);
- break;
- case 0x1008: /* 740P/750P ?? */
- maj = ((pvr >> 8) & 0xFF) - 1;
- min = pvr & 0xFF;
- break;
- default:
- maj = (pvr >> 8) & 0xFF;
- min = pvr & 0xFF;
- break;
- }
- }
-
- /*
- * Assume here that all clock rates are the same in a
- * smp system. -- Cort
- */
- seq_printf(m, "clock\t\t: %lu.%06luMHz\n", ppc_proc_freq / 1000000,
- ppc_proc_freq % 1000000);
-
- seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
- maj, min, PVR_VER(pvr), PVR_REV(pvr));
-
- seq_printf(m, "bogomips\t: %lu.%02lu\n",
- lpj / (500000/HZ), (lpj / (5000/HZ)) % 100);
-
-#ifdef CONFIG_SMP
- seq_printf(m, "\n");
-#endif
-
- return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
- int i = *pos;
-
- return i <= NR_CPUS? (void *) (i + 1): NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
- ++*pos;
- return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-struct seq_operations cpuinfo_op = {
- .start =c_start,
- .next = c_next,
- .stop = c_stop,
- .show = show_cpuinfo,
-};
-
/*
* We're called here very early in the boot. We determine the machine
* type and call the appropriate low-level setup functions.
return KERNELBASE + offset;
}
-#ifdef CONFIG_PPC_OF
-void __init
-intuit_machine_type(void)
-{
- char *model;
- struct device_node *root;
-
- /* ask the OF info if we're a chrp or pmac */
- root = find_path_device("/");
- if (root != 0) {
- /* assume pmac unless proven to be chrp -- Cort */
- _machine = _MACH_Pmac;
- model = get_property(root, "device_type", NULL);
- if (model && !strncmp("chrp", model, 4))
- _machine = _MACH_chrp;
- else {
- model = get_property(root, "model", NULL);
- if (model && !strncmp(model, "IBM", 3))
- _machine = _MACH_chrp;
- }
- }
-}
-#endif
-
#ifdef CONFIG_PPC_MULTIPLATFORM
/*
* The PPC_MULTIPLATFORM version of platform_init...
#endif
}
}
-
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-extern char *of_stdout_device;
-
-static int __init set_preferred_console(void)
-{
- struct device_node *prom_stdout;
- char *name;
- int offset = 0;
-
- if (of_stdout_device == NULL)
- return -ENODEV;
-
- /* The user has requested a console so this is already set up. */
- if (strstr(saved_command_line, "console="))
- return -EBUSY;
-
- prom_stdout = find_path_device(of_stdout_device);
- if (!prom_stdout)
- return -ENODEV;
-
- name = (char *)get_property(prom_stdout, "name", NULL);
- if (!name)
- return -ENODEV;
-
- if (strcmp(name, "serial") == 0) {
- int i;
- u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
- if (i > 8) {
- switch (reg[1]) {
- case 0x3f8:
- offset = 0;
- break;
- case 0x2f8:
- offset = 1;
- break;
- case 0x898:
- offset = 2;
- break;
- case 0x890:
- offset = 3;
- break;
- default:
- /* We dont recognise the serial port */
- return -ENODEV;
- }
- }
- } else if (strcmp(name, "ch-a") == 0)
- offset = 0;
- else if (strcmp(name, "ch-b") == 0)
- offset = 1;
- else
- return -ENODEV;
- return add_preferred_console("ttyS", offset, NULL);
-}
-console_initcall(set_preferred_console);
-#endif /* CONFIG_SERIAL_CORE_CONSOLE */
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+#endif
/*
* Find out what kind of machine we're on and save any data we need
init_boot_display();
#endif
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PMAC
/* This could be called "early setup arch", it must be done
* now because xmon need it
*/
OSDN Git Service
