ARM: dts: sun8i: h3: Add SY8106A regulator to Orange Pi PC

Add SY8106A regulator to r_i2c bus and enable the r_i2c bus on
Orange Pi PC, then set the power supply of the ARM cores to this
regulator, in order to enable DVFS.

Signed-off-by: Ondrej Jirman <megous@megous.com>
[Icenowy: Enable DVFS in this patch, slight changes and change commit
 message]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index cea4d64..4624033 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -113,6 +113,10 @@
        status = "okay";
 };
 
+&cpu0 {
+       cpu-supply = <&reg_vdd_cpux>;
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -182,6 +186,30 @@
        };
 };
 
+&r_i2c {
+       status = "okay";
+
+       reg_vdd_cpux: regulator@65 {
+               compatible = "silergy,sy8106a";
+               reg = <0x65>;
+               regulator-name = "vdd-cpux";
+               silergy,fixed-microvolt = <1200000>;
+               /*
+                * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
+                * however both the Armbian DVFS table and the official one
+                * have operating points with voltage under 1.1V, and both
+                * DVFS table are known to work properly at the lowest
+                * operating point.
+                *
+                * Use 1.0V as the minimum voltage instead.
+                */
+               regulator-min-microvolt = <1000000>;
+               regulator-max-microvolt = <1300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+};
+
 &r_pio {
        leds_r_opc: led_pins {
                pins = "PL10";