documentation: update header file paths

Update several Documentation/ files and a few sub-dir files (only one
change in each) to reflect changed header files locations.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt
index c74fec8..b2a4d6d 100644 (file)
--- a/Documentation/DMA-mapping.txt
+++ b/Documentation/DMA-mapping.txt
@@ -26,7 +26,7 @@ mapped only for the time they are actually used and unmapped after the DMA
 transfer.
 
 The following API will work of course even on platforms where no such
-hardware exists, see e.g. include/asm-i386/pci.h for how it is implemented on
+hardware exists, see e.g. arch/x86/include/asm/pci.h for how it is implemented on
 top of the virt_to_bus interface.
 
 First of all, you should make sure

diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 8246991..f1d6399 100644 (file)
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -84,7 +84,7 @@ Code  Seq#    Include File            Comments
 'B'    C0-FF                           advanced bbus
                                        <mailto:maassen@uni-freiburg.de>
 'C'    all     linux/soundcard.h
-'D'    all     asm-s390/dasd.h
+'D'    all     arch/s390/include/asm/dasd.h
 'E'    all     linux/input.h
 'F'    all     linux/fb.h
 'H'    all     linux/hiddev.h
@@ -105,7 +105,7 @@ Code        Seq#    Include File            Comments
 'S'    80-81   scsi/scsi_ioctl.h       conflict!
 'S'    82-FF   scsi/scsi.h             conflict!
 'T'    all     linux/soundcard.h       conflict!
-'T'    all     asm-i386/ioctls.h       conflict!
+'T'    all     arch/x86/include/asm/ioctls.h   conflict!
 'U'    00-EF   linux/drivers/usb/usb.h
 'V'    all     linux/vt.h
 'W'    00-1F   linux/watchdog.h        conflict!
@@ -120,7 +120,7 @@ Code        Seq#    Include File            Comments
                                        <mailto:natalia@nikhefk.nikhef.nl>
 'c'    00-7F   linux/comstats.h        conflict!
 'c'    00-7F   linux/coda.h            conflict!
-'c'    80-9F   asm-s390/chsc.h
+'c'    80-9F   arch/s390/include/asm/chsc.h
 'd'    00-FF   linux/char/drm/drm/h    conflict!
 'd'    00-DF   linux/video_decoder.h   conflict!
 'd'    F0-FF   linux/digi1.h
@@ -170,7 +170,7 @@ Code        Seq#    Include File            Comments
                                        <mailto:oe@port.de>
 0x80   00-1F   linux/fb.h
 0x81   00-1F   linux/videotext.h
-0x89   00-06   asm-i386/sockios.h
+0x89   00-06   arch/x86/include/asm/sockios.h
 0x89   0B-DF   linux/sockios.h
 0x89   E0-EF   linux/sockios.h         SIOCPROTOPRIVATE range
 0x89   F0-FF   linux/sockios.h         SIOCDEVPRIVATE range

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a2d8805..7f0b694 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -469,8 +469,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
        clearcpuid=BITNUM [X86]
                        Disable CPUID feature X for the kernel. See
-                       include/asm-x86/cpufeature.h for the valid bit numbers.
-                       Note the Linux specific bits are not necessarily
+                       arch/x86/include/asm/cpufeature.h for the valid bit
+                       numbers. Note the Linux specific bits are not necessarily
                        stable over kernel options, but the vendor specific
                        ones should be.
                        Also note that user programs calling CPUID directly

diff --git a/Documentation/magic-number.txt b/Documentation/magic-number.txt
index 9507002..505f196 100644 (file)
--- a/Documentation/magic-number.txt
+++ b/Documentation/magic-number.txt
@@ -125,14 +125,14 @@ TRIDENT_CARD_MAGIC    0x5072696E  trident_card      sound/oss/trident.c
 ROUTER_MAGIC          0x524d4157  wan_device        include/linux/wanrouter.h
 SCC_MAGIC             0x52696368  gs_port           drivers/char/scc.h
 SAVEKMSG_MAGIC1       0x53415645  savekmsg          arch/*/amiga/config.c
-GDA_MAGIC             0x58464552  gda               include/asm-mips64/sn/gda.h
+GDA_MAGIC             0x58464552  gda               arch/mips/include/asm/sn/gda.h
 RED_MAGIC1            0x5a2cf071  (any)             mm/slab.c
 STL_PORTMAGIC         0x5a7182c9  stlport           include/linux/stallion.h
 EEPROM_MAGIC_VALUE    0x5ab478d2  lanai_dev         drivers/atm/lanai.c
 HDLCDRV_MAGIC         0x5ac6e778  hdlcdrv_state     include/linux/hdlcdrv.h
 EPCA_MAGIC            0x5c6df104  channel           include/linux/epca.h
 PCXX_MAGIC            0x5c6df104  channel           drivers/char/pcxx.h
-KV_MAGIC              0x5f4b565f  kernel_vars_s     include/asm-mips64/sn/klkernvars.h
+KV_MAGIC              0x5f4b565f  kernel_vars_s     arch/mips/include/asm/sn/klkernvars.h
 I810_STATE_MAGIC      0x63657373  i810_state        sound/oss/i810_audio.c
 TRIDENT_STATE_MAGIC   0x63657373  trient_state      sound/oss/trident.c
 M3_CARD_MAGIC         0x646e6f50  m3_card           sound/oss/maestro3.c
@@ -158,7 +158,7 @@ CCB_MAGIC             0xf2691ad2  ccb               drivers/scsi/ncr53c8xx.c
 QUEUE_MAGIC_FREE      0xf7e1c9a3  queue_entry       drivers/scsi/arm/queue.c
 QUEUE_MAGIC_USED      0xf7e1cc33  queue_entry       drivers/scsi/arm/queue.c
 HTB_CMAGIC            0xFEFAFEF1  htb_class         net/sched/sch_htb.c
-NMI_MAGIC             0x48414d4d455201 nmi_s        include/asm-mips64/sn/nmi.h
+NMI_MAGIC             0x48414d4d455201 nmi_s        arch/mips/include/asm/sn/nmi.h
 
 Note that there are also defined special per-driver magic numbers in sound
 memory management. See include/sound/sndmagic.h for complete list of them. Many

diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
index 25a6ed1..f54962a 100644 (file)
--- a/Documentation/mips/AU1xxx_IDE.README
+++ b/Documentation/mips/AU1xxx_IDE.README
@@ -44,7 +44,7 @@ FILES, CONFIGS AND COMPATABILITY
 
 Two files are introduced:
 
-  a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+  a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h'
      containes : struct _auide_hwif
                  timing parameters for PIO mode 0/1/2/3/4
                  timing parameters for MWDMA 0/1/2

diff --git a/Documentation/powerpc/cpu_features.txt b/Documentation/powerpc/cpu_features.txt
index 4727398..ffa4183 100644 (file)
--- a/Documentation/powerpc/cpu_features.txt
+++ b/Documentation/powerpc/cpu_features.txt
@@ -31,7 +31,7 @@ anyways).
 
 After detecting the processor type, the kernel patches out sections of code
 that shouldn't be used by writing nop's over it. Using cpufeatures requires
-just 2 macros (found in include/asm-ppc/cputable.h), as seen in head.S
+just 2 macros (found in arch/powerpc/include/asm/cputable.h), as seen in head.S
 transfer_to_handler:
 
        #ifdef CONFIG_ALTIVEC

diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
index 169ad42..4f91385 100644 (file)
--- a/Documentation/x86/zero-page.txt
+++ b/Documentation/x86/zero-page.txt
@@ -3,7 +3,7 @@ protocol of kernel. These should be filled by bootloader or 16-bit
 real-mode setup code of the kernel. References/settings to it mainly
 are in:
 
-  include/asm-x86/bootparam.h
+  arch/x86/include/asm/bootparam.h
 
 
 Offset Proto   Name            Meaning