ARM: dts: set up trigger type for edt-ft5x06 interrupts

Now that the driver respects IRQ trigger settings from device tree, let's
fix them up in individual DTSes (note that the driver is still compatible
with older DTSes).

Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index c17097d..d83fdcd 100644 (file)
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -471,7 +471,7 @@
 
                reg = <0x38>;
                interrupt-parent = <&gpio0>;
-               interrupts = <31 0>;
+               interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 
                reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index a5b27c8..4ea8934 100644 (file)
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -13,6 +13,7 @@
 /dts-v1/;
 #include "imx28.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
        model = "Ka-Ro electronics TX28 module";
@@ -324,7 +325,7 @@
                pinctrl-names = "default";
                pinctrl-0 = <&tx28_edt_ft5x06_pins>;
                interrupt-parent = <&gpio2>;
-               interrupts = <5 0>;
+               interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
                reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
                wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
        };

diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index 3b73e81..13e842b 100644 (file)
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -12,6 +12,7 @@
 /dts-v1/;
 #include "imx53-tx53.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -216,7 +217,7 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
                interrupt-parent = <&gpio6>;
-               interrupts = <15 0>;
+               interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
                reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
                wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
        };

diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index f02b80b..35178f2 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -11,6 +11,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -272,7 +273,7 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_edt_ft5x06>;
                interrupt-parent = <&gpio6>;
-               interrupts = <15 0>;
+               interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
                reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
                wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
                linux,wakeup;