arm64: dts: qcom: Add device tree for Sony Xperia 1 IV

Add support for Sony Xperia 1 IV, a.k.a PDX223. This device is a part
of the SoMC SM8450 Nagara platform and currently it is the only
device based on that board, so no -common DTSI is created until (if?)
other Nagara devices appear.

This commit brings support for:
* SD Card
* USB (*including SuperSpeed*)
* ADSP/CDSP/SLPI (modem remains untested for now)
* Most regulators (some GPIO-enabled ones require PMIC GPIOs but
trying to access any SPMI device crashes the device..)
* Part of I2C-connected peripherals (notably no touch due to a
driver bug)
* PCIe0 (PCIe1 is unused)

Do note display via simplefb is not supported, as the display is blanked
upon exiting XBL.

To create a working boot image, you need to run:
cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8450-sony-xperia-\
nagara-pdx223.dtb > .Image.gz-dtb

mkbootimg \
--kernel .Image.gz-dtb \
--ramdisk some_initrd.img \
--pagesize 4096 \
--base 0x0 \
--kernel_offset 0x8000 \
--ramdisk_offset 0x1000000 \
--tags_offset 0x100 \
--cmdline "SOME_CMDLINE" \
--dtb_offset 0x1f00000 \
--header_version 1 \
--os_version 12 \
--os_patch_level 2022-06 \ # or newer
-o boot.img-sony-xperia-pdx223

Then, you need to flash it on the device and get rid of all the
vendor_boot/dtbo mess:

// You have to either pull vbmeta{"","_system"} from
// /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system \
vbmeta_system.img

fastboot flash boot boot.img-sony-xperia-pdx223
fastboot erase vendor_boot
fastboot erase recovery
fastboot flash dtbo emptydtbo.img
fastboot reboot

Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing
a "fastboot erase" won't cut it, the bootloader will go crazy and things will
fall apart when it tries to overlay random bytes from an empty partition onto a
perfectly good appended DTB.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714123406.1919836-5-konrad.dybcio@somainline.org

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1d86a33..804e7ec 100644 (file)
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -152,3 +152,4 @@ dtb-$(CONFIG_ARCH_QCOM)     += sm8350-sony-xperia-sagami-pdx214.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sm8350-sony-xperia-sagami-pdx215.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sm8450-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sm8450-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)        += sm8450-sony-xperia-nagara-pdx223.dtb

diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
new file mode 100644 (file)
index 0000000..7fe582b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
@@ -0,0 +1,634 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8450.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &video_mem;
+
+/ {
+       model = "Sony Xperia 1 IV";
+       compatible = "sony,pdx223", "qcom,sm8450";
+       chassis-type = "handset";
+
+       aliases {
+               serial0 = &uart7;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       reserved-memory {
+               adsp_mem: memory@85700000 {
+                       reg = <0x0 0x85700000 0x0 0x2800000>;
+                       no-map;
+               };
+
+               video_mem: memory@9fd00000 {
+                       reg = <0x0 0x9fd00000 0x0 0x700000>;
+                       no-map;
+               };
+
+               rmtfs_mem: memory@f3300000 {
+                       compatible = "qcom,rmtfs-mem";
+                       reg = <0x0 0xf3300000 0x0 0x280000>;
+                       no-map;
+
+                       qcom,client-id = <1>;
+                       qcom,vmid = <15>;
+               };
+
+               ramoops@ffc00000 {
+                       compatible = "ramoops";
+                       reg = <0 0xffc00000 0 0x200000>;
+                       console-size = <0x40000>;
+                       record-size = <0x1000>;
+                       ecc-size = <16>;
+                       no-map;
+               };
+       };
+
+       /* Sadly, the voltages for these GPIO regulators are unknown. */
+       imx650_vana_vreg: imx650-vana-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "imx650_vana_vreg";
+               gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       vph_pwr: vph-pwr-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vph_pwr";
+               regulator-min-microvolt = <3700000>;
+               regulator-max-microvolt = <3700000>;
+
+               regulator-always-on;
+               regulator-boot-on;
+       };
+};
+
+&apps_rsc {
+       pm8350-rpmh-regulators {
+               compatible = "qcom,pm8350-rpmh-regulators";
+               qcom,pmic-id = "b";
+
+               vdd-s1-supply = <&vph_pwr>;
+               vdd-s2-supply = <&vph_pwr>;
+               vdd-s3-supply = <&vph_pwr>;
+               vdd-s4-supply = <&vph_pwr>;
+               vdd-s5-supply = <&vph_pwr>;
+               vdd-s6-supply = <&vph_pwr>;
+               vdd-s7-supply = <&vph_pwr>;
+               vdd-s8-supply = <&vph_pwr>;
+               vdd-s9-supply = <&vph_pwr>;
+               vdd-s10-supply = <&vph_pwr>;
+               vdd-s11-supply = <&vph_pwr>;
+               vdd-s12-supply = <&vph_pwr>;
+
+               vdd-l1-l4-supply = <&pm8350_s11>;
+               vdd-l2-l7-supply = <&vreg_bob>;
+               vdd-l3-l5-supply = <&vreg_bob>;
+               vdd-l6-l9-l10-supply = <&pm8350_s12>;
+
+               /*
+                * ARC regulators:
+                * s5 - gfx.lvl
+                * l8 - lcx.lvl
+                */
+
+               pm8350_s10: smps10 {
+                       regulator-name = "pm8350_s10";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8350_s11: smps11 {
+                       regulator-name = "pm8350_s11";
+                       regulator-min-microvolt = <848000>;
+                       regulator-max-microvolt = <1104000>;
+               };
+
+               pm8350_s12: smps12 {
+                       regulator-name = "pm8350_s12";
+                       regulator-min-microvolt = <1224000>;
+                       regulator-max-microvolt = <1400000>;
+               };
+
+               pm8350_l1: ldo1 {
+                       regulator-name = "pm8350_l1";
+                       regulator-min-microvolt = <912000>;
+                       regulator-max-microvolt = <920000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350_l2: ldo2 {
+                       regulator-name = "pm8350_l2";
+                       regulator-min-microvolt = <3072000>;
+                       regulator-max-microvolt = <3072000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350_l3: ldo3 {
+                       regulator-name = "pm8350_l3";
+                       regulator-min-microvolt = <904000>;
+                       regulator-max-microvolt = <904000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350_l5: ldo5 {
+                       regulator-name = "pm8350_l5";
+                       regulator-min-microvolt = <880000>;
+                       regulator-max-microvolt = <912000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350_l6: ldo6 {
+                       regulator-name = "pm8350_l6";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350_l7: ldo7 {
+                       regulator-name = "pm8350_l7";
+                       regulator-min-microvolt = <2504000>;
+                       regulator-max-microvolt = <2504000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350_l9: ldo9 {
+                       regulator-name = "pm8350_l9";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+       };
+
+       pm8350c-rpmh-regulators {
+               compatible = "qcom,pm8350c-rpmh-regulators";
+               qcom,pmic-id = "c";
+
+               vdd-s1-supply = <&vph_pwr>;
+               vdd-s2-supply = <&vph_pwr>;
+               vdd-s3-supply = <&vph_pwr>;
+               vdd-s4-supply = <&vph_pwr>;
+               vdd-s5-supply = <&vph_pwr>;
+               vdd-s6-supply = <&vph_pwr>;
+               vdd-s7-supply = <&vph_pwr>;
+               vdd-s8-supply = <&vph_pwr>;
+               vdd-s9-supply = <&vph_pwr>;
+               vdd-s10-supply = <&vph_pwr>;
+
+               vdd-l1-l12-supply = <&vreg_bob>;
+               vdd-l2-l8-supply = <&vreg_bob>;
+               vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+               vdd-l6-l9-l11-supply = <&vreg_bob>;
+               vdd-l10-supply = <&pm8350_s12>;
+
+               vdd-bob-supply = <&vph_pwr>;
+
+               /*
+                * ARC regulators:
+                * s2 - mxc.lvl
+                * s4 - mss.lvl
+                * s6 - cx.lvl
+                */
+
+               pm8350c_s1: smps1 {
+                       regulator-name = "pm8350c_s1";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2024000>;
+               };
+
+               pm8350c_s10: smps10 {
+                       regulator-name = "pm8350c_s10";
+                       regulator-min-microvolt = <1000000>;
+                       regulator-max-microvolt = <1100000>;
+               };
+
+               vreg_bob: bob {
+                       regulator-name = "vreg_bob";
+                       regulator-min-microvolt = <3400000>;
+                       regulator-max-microvolt = <3960000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+               };
+
+               pm8350c_l1: ldo1 {
+                       regulator-name = "pm8350c_l1";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350c_l2: ldo2 {
+                       regulator-name = "pm8350c_l2";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350c_l3: ldo3 {
+                       regulator-name = "pm8350c_l3";
+                       regulator-min-microvolt = <3296000>;
+                       regulator-max-microvolt = <3304000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350c_l4: ldo4 {
+                       regulator-name = "pm8350c_l4";
+                       regulator-min-microvolt = <1704000>;
+                       regulator-max-microvolt = <3000000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350c_l5: ldo5 {
+                       regulator-name = "pm8350c_l5";
+                       regulator-min-microvolt = <1704000>;
+                       regulator-max-microvolt = <3000000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350c_l6: ldo6 {
+                       regulator-name = "pm8350c_l6";
+                       regulator-min-microvolt = <2960000>;
+                       /* Originally max = 3008000 but SDHCI expects 2960000 */
+                       regulator-max-microvolt = <2960000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350c_l7: ldo7 {
+                       regulator-name = "pm8350c_l7";
+                       regulator-min-microvolt = <3008000>;
+                       regulator-max-microvolt = <3008000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350c_l8: ldo8 {
+                       regulator-name = "pm8350c_l8";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350c_l9: ldo9 {
+                       regulator-name = "pm8350c_l9";
+                       regulator-min-microvolt = <2960000>;
+                       /* Originally max = 3008000 but SDHCI expects 2960000 */
+                       regulator-max-microvolt = <2960000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350c_l10: ldo10 {
+                       regulator-name = "pm8350c_l10";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350c_l12: ldo12 {
+                       regulator-name = "pm8350c_l12";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1968000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8350c_l13: ldo13 {
+                       regulator-name = "pm8350c_l13";
+                       regulator-min-microvolt = <3000000>;
+                       regulator-max-microvolt = <3000000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+       };
+
+       pm8450-rpmh-regulators {
+               compatible = "qcom,pm8450-rpmh-regulators";
+               qcom,pmic-id = "h";
+
+               vdd-s1-supply = <&vph_pwr>;
+               vdd-s2-supply = <&vph_pwr>;
+               vdd-s3-supply = <&vph_pwr>;
+               vdd-s4-supply = <&vph_pwr>;
+               vdd-s5-supply = <&vph_pwr>;
+               vdd-s6-supply = <&vph_pwr>;
+
+               vdd-l2-supply = <&vreg_bob>;
+               vdd-l3-supply = <&vreg_bob>;
+               vdd-l4-supply = <&vreg_bob>;
+
+               /*
+                * ARC regulators:
+                * S2 - ebi.lvl
+                * S4 - mmcx.lvl
+                * S6 - mx.lvl
+                * L1 - lmx.lvl
+                */
+
+               pm8450_s3: smps3 {
+                       regulator-name = "pm8450_s3";
+                       regulator-min-microvolt = <500000>;
+                       regulator-max-microvolt = <600000>;
+               };
+
+               pm8450_l2: ldo2 {
+                       regulator-name = "pm8450_l2";
+                       regulator-min-microvolt = <880000>;
+                       regulator-max-microvolt = <912000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               pm8450_l3: ldo3 {
+                       regulator-name = "pm8450_l3";
+                       regulator-min-microvolt = <912000>;
+                       regulator-max-microvolt = <912000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+       };
+
+       pmr735a-rpmh-regulators {
+               compatible = "qcom,pmr735a-rpmh-regulators";
+               qcom,pmic-id = "e";
+
+               vdd-s1-supply = <&vph_pwr>;
+               vdd-s2-supply = <&vph_pwr>;
+               vdd-s3-supply = <&vph_pwr>;
+
+               vdd-l1-l2-supply = <&pmr735a_s2>;
+               vdd-l3-supply = <&pmr735a_s1>;
+               vdd-l4-supply = <&pm8350c_s1>;
+               vdd-l5-l6-supply = <&pm8350c_s1>;
+               vdd-l7-bob-supply = <&vreg_bob>;
+
+               pmr735a_s1: smps1 {
+                       regulator-name = "pmr735a_s1";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1296000>;
+               };
+
+               pmr735a_s2: smps2 {
+                       regulator-name = "pmr735a_s2";
+                       regulator-min-microvolt = <500000>;
+                       regulator-max-microvolt = <1040000>;
+               };
+
+               pmr735a_s3: smps3 {
+                       regulator-name = "pmr735a_s3";
+                       regulator-min-microvolt = <435000>;
+                       regulator-max-microvolt = <2352000>;
+               };
+
+               pmr735a_l1: ldo1 {
+                       regulator-name = "pmr735a_l1";
+                       regulator-min-microvolt = <800000>;
+                       regulator-max-microvolt = <800000>;
+               };
+
+               pmr735a_l2: ldo2 {
+                       regulator-name = "pmr735a_l2";
+                       regulator-min-microvolt = <480000>;
+                       regulator-max-microvolt = <912000>;
+               };
+
+               pmr735a_l3: ldo3 {
+                       regulator-name = "pmr735a_l3";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+               };
+
+               pmr735a_l4: ldo4 {
+                       regulator-name = "pmr735a_l4";
+                       regulator-min-microvolt = <1776000>;
+                       regulator-max-microvolt = <1776000>;
+               };
+
+               pmr735a_l5: ldo5 {
+                       regulator-name = "pmr735a_l5";
+                       regulator-min-microvolt = <880000>;
+                       regulator-max-microvolt = <880000>;
+               };
+
+               pmr735a_l6: ldo6 {
+                       regulator-name = "pmr735a_l6";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+               };
+
+               pmr735a_l7: ldo7 {
+                       regulator-name = "pmr735a_l7";
+                       regulator-min-microvolt = <2800000>;
+                       regulator-max-microvolt = <2800000>;
+               };
+       };
+};
+
+&gpi_dma0 {
+       status = "okay";
+};
+
+&gpi_dma1 {
+       status = "okay";
+};
+
+&gpi_dma2 {
+       status = "okay";
+};
+
+/* I2C4 is used, it hosts a Samsung touchscreen, but GPI DMA is broken.. */
+
+&i2c5 {
+       clock-frequency = <400000>;
+       status = "okay";
+
+       /* Dialog SLG51000 CMIC @ 75 */
+};
+
+&i2c9 {
+       clock-frequency = <400000>;
+       status = "okay";
+
+       /* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c13 {
+       clock-frequency = <400000>;
+       status = "okay";
+
+       /* Richwave RTC6226 FM Radio Receiver @ 64 */
+};
+
+&i2c14 {
+       clock-frequency = <1000000>;
+       status = "okay";
+
+       cs35l41_l: speaker-amp@40 {
+               compatible = "cirrus,cs35l41";
+               reg = <0x40>;
+               interrupt-parent = <&tlmm>;
+               interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
+               reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+               cirrus,boost-peak-milliamp = <4000>;
+               cirrus,boost-ind-nanohenry = <1000>;
+               cirrus,boost-cap-microfarad = <15>;
+               cirrus,gpio2-src-select = <2>;
+               cirrus,gpio2-output-enable;
+               cirrus,asp-sdout-hiz = <3>;
+               #sound-dai-cells = <1>;
+       };
+
+       cs35l41_r: speaker-amp@41 {
+               compatible = "cirrus,cs35l41";
+               reg = <0x41>;
+               interrupt-parent = <&tlmm>;
+               interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
+               reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+               cirrus,boost-peak-milliamp = <4000>;
+               cirrus,boost-ind-nanohenry = <1000>;
+               cirrus,boost-cap-microfarad = <15>;
+               cirrus,gpio2-src-select = <2>;
+               cirrus,gpio2-output-enable;
+               cirrus,asp-sdout-hiz = <3>;
+               #sound-dai-cells = <1>;
+       };
+};
+
+&i2c15 {
+       clock-frequency = <400000>;
+       status = "okay";
+
+       /* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c19 {
+       clock-frequency = <1000000>;
+       status = "okay";
+
+       /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&pcie0 {
+       max-link-speed = <2>;
+       status = "okay";
+};
+
+&pcie0_phy {
+       vdda-phy-supply = <&pm8350_l5>;
+       vdda-pll-supply = <&pm8350_l6>;
+       status = "okay";
+};
+
+&remoteproc_adsp {
+       firmware-name = "qcom/adsp.mbn";
+       status = "okay";
+};
+
+&remoteproc_cdsp {
+       firmware-name = "qcom/cdsp.mbn";
+       status = "okay";
+};
+
+&remoteproc_slpi {
+       firmware-name = "qcom/slpi.mbn";
+       status = "okay";
+};
+
+&qupv3_id_0 {
+       status = "okay";
+};
+
+&qupv3_id_1 {
+       status = "okay";
+};
+
+&qupv3_id_2 {
+       status = "okay";
+};
+
+&sdhc_2 {
+       cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+       pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+       vmmc-supply = <&pm8350c_l9>;
+       vqmmc-supply = <&pm8350c_l6>;
+       /* Forbid SDR104/SDR50 - broken hw! */
+       sdhci-caps-mask = <0x3 0x0>;
+       no-sdio;
+       no-mmc;
+       status = "okay";
+};
+
+&spi10 {
+       status = "okay";
+
+       /* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
+&tlmm {
+       gpio-reserved-ranges = <28 4>;
+
+       sdc2_default_state: sdc2-default {
+               clk {
+                       pins = "sdc2_clk";
+                       drive-strength = <16>;
+                       bias-disable;
+               };
+
+               cmd {
+                       pins = "sdc2_cmd";
+                       drive-strength = <16>;
+                       bias-pull-up;
+               };
+
+               data {
+                       pins = "sdc2_data";
+                       drive-strength = <16>;
+                       bias-pull-up;
+               };
+       };
+
+       ts_int_default: ts-int-default {
+               pins = "gpio23";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+               input-enable;
+       };
+
+       sdc2_card_det_n: sd-card-det-n {
+               pins = "gpio92";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-pull-up;
+       };
+};
+
+&uart7 {
+       status = "okay";
+};
+
+&usb_1 {
+       status = "okay";
+};
+
+&usb_1_dwc3 {
+       dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+       vdda-pll-supply = <&pm8350_l5>;
+       vdda18-supply = <&pm8350c_l1>;
+       vdda33-supply = <&pm8350_l2>;
+       status = "okay";
+};
+
+&usb_1_qmpphy {
+       vdda-phy-supply = <&pm8350_l6>;
+       vdda-pll-supply = <&pm8350_l1>;
+       status = "okay";
+};