"dma_ck": dma_bus clock for data transfer by DMA,
"xhci_ck": controller clock
- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory
Optional properties:
- wakeup-source : enable USB remote wakeup;
See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- imod-interval-ns: default interrupt moderation interval is 5000ns
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
supported.
Example:
- clock-names : must contain "sys_ck" for clock of controller,
the following clocks are optional:
"ref_ck", "mcu_ck" and "dma_ck";
- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory
- dr_mode : should be one of "host", "peripheral" or "otg",
refer to usb/generic.txt
- mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
bit1 for u3port1, ... etc;
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
supported.
Sub-nodes:
- reg : Should contain 1 register ranges(address and length)
- interrupts : UHCI controller interrupt
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
supported.
Example:
- usb3-lpm-capable: determines if platform is USB3 LPM capable
- quirk-broken-port-ped: set if the controller has broken port disable mechanism
- imod-interval-ns: default interrupt moderation interval is 5000ns
- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
supported.