+++ /dev/null
-# Copyright (C) 1999
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
-
-# This file was written by Elena Zannoni (ezannoni@cygnus.com)
-
-if $tracelevel then {
- strace $tracelevel
-}
-
-
-#
-# test running programs
-#
-set prms_id 0
-set bug_id 0
-
-set testfile "annota2"
-set srcfile ${testfile}.cc
-set binfile ${objdir}/${subdir}/${testfile}
-
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++ additional_flags=-w}] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
-}
-
-# are we on a target board? If so, don't run these tests.
-# note: this is necessary because we cannot use runto_main (which would
-# work for remote targets too) because of the different prompt we get
-# when using annotation level 2.
-#
-if ![isnative] then {
- return 0
-}
-
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-if [target_info exists gdb_stub] {
- gdb_step_for_stub;
-}
-
-#
-# line number where we need to stop in main
-#
-set main_line 22
-
-# The commands we test here produce many lines of output; disable "press
-# <return> to continue" prompts.
-send_gdb "set height 0\n"
-gdb_expect -re "$gdb_prompt $"
-
-#
-# break at main
-#
-gdb_test "break 22" \
- "Breakpoint.*at.* file .*$srcfile, line.*" \
- "breakpoint main"
-
-
-#
-# NOTE: this prompt is OK only when the annotation level is > 1
-# NOTE: When this prompt is in use the gdb_test procedure cannot be used because
-# it assumes that the last char of the gdb_prompt is a white space. This is not
-# true with this annotated prompt. So we must use send_gdb and gdb_expect.
-#
-
-set old_gdb_prompt $gdb_prompt
-set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n"
-
-send_gdb "set annotate 2\n"
-gdb_expect {
- -re "set annotate 2\r\n$gdb_prompt$" { pass "annotation set at level 2" }
- -re ".*$gdb_prompt$" { fail "annotation set at level 2" }
- timeout { fail "annotation set at level 2 (timeout)" }
- }
-
-send_gdb "run\n"
- gdb_expect {
- -re "\r\n\032\032post-prompt\r\nStarting program: $binfile \r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032breakpoints-invalid\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 1\r\n\r\nBreakpoint 1, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*annota2.cc\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$main_line\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*$srcfile:$main_line:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
- { pass "run until main breakpoint" }
- -re ".*$gdb_prompt$" { fail "run until main breakpoint" }
- timeout { fail "run until main breakpoint (timeout)" }
- }
-
-#
-# print class 'a' with public fields.
-# this will test:
-# annotate-field-begin
-# annotate-field-name-end
-# annotate-field-value
-# annotate-field-end
-#
-send_gdb "print a\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032value-history-begin 1 -\r\n.*= \r\n\032\032value-history-value\r\n\\{\r\n\032\032field-begin -\r\nx\r\n\032\032field-name-end\r\n = \r\n\032\032field-value\r\n1\r\n\032\032field-end\r\n, \r\n\032\032field-begin -\r\ny\r\n\032\032field-name-end\r\n = \r\n\032\032field-value\r\n2\r\n\032\032field-end\r\n\\}\r\n\r\n\032\032value-history-end\r\n$gdb_prompt$" \
- { pass "print class" }
- -re ".*$gdb_prompt$" { fail "print class" }
- timeout { fail "print class (timeout)" }
-}
-
-#
-# continue until exit
-# this will test:
-# annotate-exited
-#
-send_gdb "continue\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\na.x is 1\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032exited 0\r\n\r\nProgram exited normally.\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
- { pass "continue until exit" }
- -re ".*$gdb_prompt$" { fail "continue to exit" }
- timeout { fail "continue to exit (timeout)" }
-}
-
-#
-# delete all breakpoints
-#
-send_gdb "delete\n"
-gdb_expect {
- -re " " {
- send_gdb "y\n"
- gdb_expect {
- -re " " { pass "delete bps" }
- -re ".*$gdb_prompt$" { fail "delete bps" }
- timeout { fail "delete bps (timeout)" }
- }
- }
- -re ".*$gdb_prompt$" { fail "delete bps" }
- timeout { fail "delete bps (timeout)" }
-}
-
-#
-# break at first line of main.
-#
-send_gdb "break main\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" \
- { pass "breakpoint at main" }
- -re ".*$gdb_prompt$" { fail "break at main" }
- timeout { fail "break at main (timeout)" }
-}
-
-#
-# change value of main_line
-#
-set main_line 19
-
-#
-# run program up to breakpoint.
-#
-send_gdb "run\n"
- gdb_expect {
- -re "\r\n\032\032post-prompt\r\n.*Starting program: $binfile \r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032breakpoints-invalid\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*annota2.cc\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$main_line\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*$srcfile:$main_line:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
- { pass "run until main breakpoint" }
- -re ".*$gdb_prompt$" { fail "run until main breakpoint" }
- timeout { fail "run until main breakpoint (timeout)" }
- }
-
-#
-# set up a watch point on a.x
-#
-send_gdb "watch a.x\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nWatchpoint 3: a.x\r\n$gdb_prompt$" \
- { pass "set watch on a.x" }
- -re ".*$gdb_prompt$" { fail "set watch on a.x" }
- timeout { fail "set watch on a.x (timeout)" }
-}
-
-#
-# do a next, so that the watchpoint triggers. This will test:
-# annotate-watchpoint
-#
-send_gdb "next\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032watchpoint 3\r\nWatchpoint 3: a.x\r\n\r\nOld value = 4\r\nNew value = 1\r\n\r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*$srcfile\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n20\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
- { pass "watch triggered on a.x" }
- -re ".*$gdb_prompt$" { fail "watch triggered on a.x" }
- timeout { fail "watch triggered on a.x (timeout)" }
-}
-
-
-#
-# send ^C to gdb, so that the quit() function gets called
-# and annotate-quit is tested
-# test:
-# annotate-quit
-#
-send_gdb "\003"
-gdb_expect {
- -re "\r\n\032\032error-begin\r\nQuit\r\n\r\n\032\032quit\r\n$gdb_prompt$" \
- { pass "annotate-quit" }
- -re ".*$gdb_prompt$" { fail "annotate-quit" }
- timeout { fail "annotate-quit (timeout)" }
-}
-
-#
-# FIXME: the testsuite does not currently have tests for
-# annotate_catchpoints and annotate_function_call
-# and a few variants of the annotations that are
-# tested (marked by FIXME on the annot?.exp files)
-#
-
-# reinstall the old prompt for the rest of the testsuite.
-
-set gdb_prompt $old_gdb_prompt