staging: comedi: pcl818: prefer using the BIT macro

Fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index e1bdde9..9132514 100644 (file)
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -124,23 +124,22 @@
 #define PCL818_AO_MSB_REG(x)                   (0x05 + ((x) * 2))
 #define PCL818_STATUS_REG                      0x08
 #define PCL818_STATUS_NEXT_CHAN_MASK           (0xf << 0)
-#define PCL818_STATUS_INT                      (1 << 4)
-#define PCL818_STATUS_MUX                      (1 << 5)
-#define PCL818_STATUS_UNI                      (1 << 6)
-#define PCL818_STATUS_EOC                      (1 << 7)
+#define PCL818_STATUS_INT                      BIT(4)
+#define PCL818_STATUS_MUX                      BIT(5)
+#define PCL818_STATUS_UNI                      BIT(6)
+#define PCL818_STATUS_EOC                      BIT(7)
 #define PCL818_CTRL_REG                                0x09
-#define PCL818_CTRL_DISABLE_TRIG               (0 << 0)
-#define PCL818_CTRL_SOFT_TRIG                  (1 << 0)
-#define PCL818_CTRL_EXT_TRIG                   (2 << 0)
-#define PCL818_CTRL_PACER_TRIG                 (3 << 0)
-#define PCL818_CTRL_DMAE                       (1 << 2)
+#define PCL818_CTRL_TRIG(x)                    (((x) & 0x3) << 0)
+#define PCL818_CTRL_DISABLE_TRIG               PCL818_CTRL_TRIG(0)
+#define PCL818_CTRL_SOFT_TRIG                  PCL818_CTRL_TRIG(1)
+#define PCL818_CTRL_EXT_TRIG                   PCL818_CTRL_TRIG(2)
+#define PCL818_CTRL_PACER_TRIG                 PCL818_CTRL_TRIG(3)
+#define PCL818_CTRL_DMAE                       BIT(2)
 #define PCL818_CTRL_IRQ(x)                     ((x) << 4)
-#define PCL818_CTRL_INTE                       (1 << 7)
+#define PCL818_CTRL_INTE                       BIT(7)
 #define PCL818_CNTENABLE_REG                   0x0a
-#define PCL818_CNTENABLE_PACER_ENA             (0 << 0)
-#define PCL818_CNTENABLE_PACER_TRIG0           (1 << 0)
-#define PCL818_CNTENABLE_CNT0_EXT_CLK          (0 << 1)
-#define PCL818_CNTENABLE_CNT0_INT_CLK          (1 << 1)
+#define PCL818_CNTENABLE_PACER_TRIG0           BIT(0)
+#define PCL818_CNTENABLE_CNT0_INT_CLK          BIT(1)  /* 0=ext clk */
 #define PCL818_DO_DI_MSB_REG                   0x0b
 #define PCL818_TIMER_BASE                      0x0c
 
@@ -740,7 +739,7 @@ static int pcl818_ai_cmd(struct comedi_device *dev,
        else
                ctrl |= PCL818_CTRL_EXT_TRIG;
 
-       outb(PCL818_CNTENABLE_PACER_ENA, dev->iobase + PCL818_CNTENABLE_REG);
+       outb(0, dev->iobase + PCL818_CNTENABLE_REG);
 
        if (dma) {
                /* setup and enable dma for the first buffer */
@@ -902,7 +901,7 @@ static void pcl818_reset(struct comedi_device *dev)
        pcl818_ai_set_chan_range(dev, 0, 0);
 
        /* stop pacer */
-       outb(PCL818_CNTENABLE_PACER_ENA, dev->iobase + PCL818_CNTENABLE_REG);
+       outb(0, dev->iobase + PCL818_CNTENABLE_REG);
 
        /* set analog output channels to 0V */
        for (chan = 0; chan < board->n_aochan; chan++) {