OSDN Git Service

ptp: ocp: add nvmem interface for accessing eeprom
authorJonathan Lemon <jonathan.lemon@gmail.com>
Tue, 8 Mar 2022 00:05:34 +0000 (16:05 -0800)
committerDavid S. Miller <davem@davemloft.net>
Wed, 9 Mar 2022 10:57:07 +0000 (10:57 +0000)
Add the at24 drivers for the eeprom, and use the accessors
via the nvmem API instead of direct i2c accesses.  This makes
things cleaner.

Add an eeprom map table which specifies where the pre-defined
information is located.  Retrieve the information and and export
it via the devlink interface.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/ptp/ptp_ocp.c

index d2d663e..433bd9d 100644 (file)
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/i2c-xiic.h>
 #include <linux/ptp_clock_kernel.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/xilinx_spi.h>
 #include <net/devlink.h>
 #include <linux/i2c.h>
 #include <linux/mtd/mtd.h>
+#include <linux/nvmem-consumer.h>
 
 #ifndef PCI_VENDOR_ID_FACEBOOK
 #define PCI_VENDOR_ID_FACEBOOK 0x1d9b
@@ -204,6 +206,9 @@ struct ptp_ocp_ext_src {
        int                     irq_vec;
 };
 
+#define OCP_BOARD_ID_LEN               13
+#define OCP_SERIAL_LEN                 6
+
 struct ptp_ocp {
        struct pci_dev          *pdev;
        struct device           dev;
@@ -230,6 +235,7 @@ struct ptp_ocp {
        struct platform_device  *spi_flash;
        struct clk_hw           *i2c_clk;
        struct timer_list       watchdog;
+       const struct ptp_ocp_eeprom_map *eeprom_map;
        struct dentry           *debug_root;
        time64_t                gnss_lost;
        int                     id;
@@ -238,8 +244,9 @@ struct ptp_ocp {
        int                     gnss2_port;
        int                     mac_port;       /* miniature atomic clock */
        int                     nmea_port;
-       u8                      serial[6];
-       bool                    has_serial;
+       u8                      board_id[OCP_BOARD_ID_LEN];
+       u8                      serial[OCP_SERIAL_LEN];
+       bool                    has_eeprom_data;
        u32                     pps_req_map;
        int                     flash_start;
        u32                     utc_tai_offset;
@@ -268,6 +275,28 @@ static int ptp_ocp_fb_board_init(struct ptp_ocp *bp, struct ocp_resource *r);
 static irqreturn_t ptp_ocp_ts_irq(int irq, void *priv);
 static int ptp_ocp_ts_enable(void *priv, u32 req, bool enable);
 
+struct ptp_ocp_eeprom_map {
+       u16     off;
+       u16     len;
+       u32     bp_offset;
+       const void * const tag;
+};
+
+#define EEPROM_ENTRY(addr, member)                             \
+       .off = addr,                                            \
+       .len = sizeof_field(struct ptp_ocp, member),            \
+       .bp_offset = offsetof(struct ptp_ocp, member)
+
+#define BP_MAP_ENTRY_ADDR(bp, map) ({                          \
+       (void *)((uintptr_t)(bp) + (map)->bp_offset);           \
+})
+
+static struct ptp_ocp_eeprom_map fb_eeprom_map[] = {
+       { EEPROM_ENTRY(0x43, board_id) },
+       { EEPROM_ENTRY(0x00, serial), .tag = "mac" },
+       { }
+};
+
 #define bp_assign_entry(bp, res, val) ({                               \
        uintptr_t addr = (uintptr_t)(bp) + (res)->bp_offset;            \
        *(typeof(val) *)addr = val;                                     \
@@ -396,6 +425,15 @@ static struct ocp_resource ocp_fb_resource[] = {
                .extra = &(struct ptp_ocp_i2c_info) {
                        .name = "xiic-i2c",
                        .fixed_rate = 50000000,
+                       .data_size = sizeof(struct xiic_i2c_platform_data),
+                       .data = &(struct xiic_i2c_platform_data) {
+                               .num_devices = 2,
+                               .devices = (struct i2c_board_info[]) {
+                                       { I2C_BOARD_INFO("24c02", 0x50) },
+                                       { I2C_BOARD_INFO("24mac402", 0x58),
+                                         .platform_data = "mac" },
+                               },
+                       },
                },
        },
        {
@@ -919,78 +957,88 @@ ptp_ocp_tod_gnss_name(int idx)
        return gnss_name[idx];
 }
 
+struct ptp_ocp_nvmem_match_info {
+       struct ptp_ocp *bp;
+       const void * const tag;
+};
+
 static int
-ptp_ocp_firstchild(struct device *dev, void *data)
+ptp_ocp_nvmem_match(struct device *dev, const void *data)
 {
-       return 1;
+       const struct ptp_ocp_nvmem_match_info *info = data;
+
+       dev = dev->parent;
+       if (!i2c_verify_client(dev) || info->tag != dev->platform_data)
+               return 0;
+
+       while ((dev = dev->parent))
+               if (dev->driver && !strcmp(dev->driver->name, KBUILD_MODNAME))
+                       return info->bp == dev_get_drvdata(dev);
+       return 0;
 }
 
-static int
-ptp_ocp_read_i2c(struct i2c_adapter *adap, u8 addr, u8 reg, u8 sz, u8 *data)
+static inline struct nvmem_device *
+ptp_ocp_nvmem_device_get(struct ptp_ocp *bp, const void * const tag)
 {
-       struct i2c_msg msgs[2] = {
-               {
-                       .addr = addr,
-                       .len = 1,
-                       .buf = &reg,
-               },
-               {
-                       .addr = addr,
-                       .flags = I2C_M_RD,
-                       .len = 2,
-                       .buf = data,
-               },
-       };
-       int err;
-       u8 len;
-
-       /* xiic-i2c for some stupid reason only does 2 byte reads. */
-       while (sz) {
-               len = min_t(u8, sz, 2);
-               msgs[1].len = len;
-               err = i2c_transfer(adap, msgs, 2);
-               if (err != msgs[1].len)
-                       return err;
-               msgs[1].buf += len;
-               reg += len;
-               sz -= len;
+       struct ptp_ocp_nvmem_match_info info = { .bp = bp, .tag = tag };
+
+       return nvmem_device_find(&info, ptp_ocp_nvmem_match);
+}
+
+static inline void
+ptp_ocp_nvmem_device_put(struct nvmem_device **nvmemp)
+{
+       if (*nvmemp != NULL) {
+               nvmem_device_put(*nvmemp);
+               *nvmemp = NULL;
        }
-       return 0;
 }
 
 static void
-ptp_ocp_get_serial_number(struct ptp_ocp *bp)
+ptp_ocp_read_eeprom(struct ptp_ocp *bp)
 {
-       struct i2c_adapter *adap;
-       struct device *dev;
-       int err;
+       const struct ptp_ocp_eeprom_map *map;
+       struct nvmem_device *nvmem;
+       const void *tag;
+       int ret;
 
        if (!bp->i2c_ctrl)
                return;
 
-       dev = device_find_child(&bp->i2c_ctrl->dev, NULL, ptp_ocp_firstchild);
-       if (!dev) {
-               dev_err(&bp->pdev->dev, "Can't find I2C adapter\n");
-               return;
-       }
-
-       adap = i2c_verify_adapter(dev);
-       if (!adap) {
-               dev_err(&bp->pdev->dev, "device '%s' isn't an I2C adapter\n",
-                       dev_name(dev));
-               goto out;
-       }
+       tag = NULL;
+       nvmem = NULL;
 
-       err = ptp_ocp_read_i2c(adap, 0x58, 0x9A, 6, bp->serial);
-       if (err) {
-               dev_err(&bp->pdev->dev, "could not read eeprom: %d\n", err);
-               goto out;
+       for (map = bp->eeprom_map; map->len; map++) {
+               if (map->tag != tag) {
+                       tag = map->tag;
+                       ptp_ocp_nvmem_device_put(&nvmem);
+               }
+               if (!nvmem) {
+                       nvmem = ptp_ocp_nvmem_device_get(bp, tag);
+                       if (!nvmem)
+                               goto out;
+               }
+               ret = nvmem_device_read(nvmem, map->off, map->len,
+                                       BP_MAP_ENTRY_ADDR(bp, map));
+               if (ret != map->len)
+                       goto read_fail;
        }
 
-       bp->has_serial = true;
+       bp->has_eeprom_data = true;
 
 out:
-       put_device(dev);
+       ptp_ocp_nvmem_device_put(&nvmem);
+       return;
+
+read_fail:
+       dev_err(&bp->pdev->dev, "could not read eeprom: %d\n", ret);
+       goto out;
+}
+
+static int
+ptp_ocp_firstchild(struct device *dev, void *data)
+{
+       return 1;
 }
 
 static struct device *
@@ -1109,16 +1157,23 @@ ptp_ocp_devlink_info_get(struct devlink *devlink, struct devlink_info_req *req,
                        return err;
        }
 
-       if (!bp->has_serial)
-               ptp_ocp_get_serial_number(bp);
-
-       if (bp->has_serial) {
-               sprintf(buf, "%pM", bp->serial);
-               err = devlink_info_serial_number_put(req, buf);
-               if (err)
-                       return err;
+       if (!bp->has_eeprom_data) {
+               ptp_ocp_read_eeprom(bp);
+               if (!bp->has_eeprom_data)
+                       return 0;
        }
 
+       sprintf(buf, "%pM", bp->serial);
+       err = devlink_info_serial_number_put(req, buf);
+       if (err)
+               return err;
+
+       err = devlink_info_version_fixed_put(req,
+                       DEVLINK_INFO_VERSION_GENERIC_BOARD_ID,
+                       bp->board_id);
+       if (err)
+               return err;
+
        return 0;
 }
 
@@ -1412,6 +1467,7 @@ static int
 ptp_ocp_fb_board_init(struct ptp_ocp *bp, struct ocp_resource *r)
 {
        bp->flash_start = 1024 * 4096;
+       bp->eeprom_map = fb_eeprom_map;
 
        ptp_ocp_tod_init(bp);
        ptp_ocp_nmea_out_init(bp);
@@ -1810,8 +1866,8 @@ serialnum_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
        struct ptp_ocp *bp = dev_get_drvdata(dev);
 
-       if (!bp->has_serial)
-               ptp_ocp_get_serial_number(bp);
+       if (!bp->has_eeprom_data)
+               ptp_ocp_read_eeprom(bp);
 
        return sysfs_emit(buf, "%pM\n", bp->serial);
 }