OSDN Git Service

Input: add new vibrator driver for various MSM SOCs
authorBrian Masney <masneyb@onstation.org>
Wed, 6 Feb 2019 17:49:41 +0000 (09:49 -0800)
committerDmitry Torokhov <dmitry.torokhov@gmail.com>
Wed, 6 Feb 2019 17:59:25 +0000 (09:59 -0800)
This patch adds a new vibrator driver that supports various Qualcomm
MSM SOCs. Driver was tested on a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Documentation/devicetree/bindings/input/msm-vibrator.txt [new file with mode: 0644]
drivers/input/misc/Kconfig
drivers/input/misc/Makefile
drivers/input/misc/msm-vibrator.c [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/input/msm-vibrator.txt b/Documentation/devicetree/bindings/input/msm-vibrator.txt
new file mode 100644 (file)
index 0000000..8dcf014
--- /dev/null
@@ -0,0 +1,36 @@
+* Device tree bindings for the Qualcomm MSM vibrator
+
+Required properties:
+
+  - compatible: Should be one of
+               "qcom,msm8226-vibrator"
+               "qcom,msm8974-vibrator"
+  - reg: the base address and length of the IO memory for the registers.
+  - pinctrl-names: set to default.
+  - pinctrl-0: phandles pointing to pin configuration nodes. See
+               Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+  - clock-names: set to pwm
+  - clocks: phandle of the clock. See
+            Documentation/devicetree/bindings/clock/clock-bindings.txt
+  - enable-gpios: GPIO that enables the vibrator.
+
+Optional properties:
+
+  - vcc-supply: phandle to the regulator that provides power to the sensor.
+
+Example from a LG Nexus 5 (hammerhead) phone:
+
+vibrator@fd8c3450 {
+       reg = <0xfd8c3450 0x400>;
+       compatible = "qcom,msm8974-vibrator";
+
+       vcc-supply = <&pm8941_l19>;
+
+       clocks = <&mmcc CAMSS_GP1_CLK>;
+       clock-names = "pwm";
+
+       enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&vibrator_pin>;
+};
index ca59a2b..e39aef8 100644 (file)
@@ -117,6 +117,16 @@ config INPUT_E3X0_BUTTON
          To compile this driver as a module, choose M here: the
          module will be called e3x0_button.
 
+config INPUT_MSM_VIBRATOR
+       tristate "Qualcomm MSM vibrator driver"
+       select INPUT_FF_MEMLESS
+       help
+         Support for the vibrator that is found on various Qualcomm MSM
+         SOCs.
+
+         To compile this driver as a module, choose M here: the module
+         will be called msm_vibrator.
+
 config INPUT_PCSPKR
        tristate "PC Speaker support"
        depends on PCSPKR_PLATFORM
index 9d0f9d1..96a6419 100644 (file)
@@ -48,6 +48,7 @@ obj-$(CONFIG_INPUT_MAX8925_ONKEY)     += max8925_onkey.o
 obj-$(CONFIG_INPUT_MAX8997_HAPTIC)     += max8997_haptic.o
 obj-$(CONFIG_INPUT_MC13783_PWRBUTTON)  += mc13783-pwrbutton.o
 obj-$(CONFIG_INPUT_MMA8450)            += mma8450.o
+obj-$(CONFIG_INPUT_MSM_VIBRATOR)       += msm-vibrator.o
 obj-$(CONFIG_INPUT_PALMAS_PWRBUTTON)   += palmas-pwrbutton.o
 obj-$(CONFIG_INPUT_PCAP)               += pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)       += pcf50633-input.o
diff --git a/drivers/input/misc/msm-vibrator.c b/drivers/input/misc/msm-vibrator.c
new file mode 100644 (file)
index 0000000..c069410
--- /dev/null
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm MSM vibrator driver
+ *
+ * Copyright (c) 2018 Brian Masney <masneyb@onstation.org>
+ *
+ * Based on qcom,pwm-vibrator.c from:
+ * Copyright (c) 2018 Jonathan Marek <jonathan@marek.ca>
+ *
+ * Based on msm_pwm_vibrator.c from downstream Android sources:
+ * Copyright (C) 2009-2014 LGE, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define REG_CMD_RCGR           0x00
+#define REG_CFG_RCGR           0x04
+#define REG_M                  0x08
+#define REG_N                  0x0C
+#define REG_D                  0x10
+#define REG_CBCR               0x24
+#define MMSS_CC_M_DEFAULT      1
+
+struct msm_vibrator {
+       struct input_dev *input;
+       struct mutex mutex;
+       struct work_struct worker;
+       void __iomem *base;
+       struct regulator *vcc;
+       struct clk *clk;
+       struct gpio_desc *enable_gpio;
+       u16 magnitude;
+       bool enabled;
+};
+
+static void msm_vibrator_write(struct msm_vibrator *vibrator, int offset,
+                              u32 value)
+{
+       writel(value, vibrator->base + offset);
+}
+
+static int msm_vibrator_start(struct msm_vibrator *vibrator)
+{
+       int d_reg_val, ret = 0;
+
+       mutex_lock(&vibrator->mutex);
+
+       if (!vibrator->enabled) {
+               ret = clk_set_rate(vibrator->clk, 24000);
+               if (ret) {
+                       dev_err(&vibrator->input->dev,
+                               "Failed to set clock rate: %d\n", ret);
+                       goto unlock;
+               }
+
+               ret = clk_prepare_enable(vibrator->clk);
+               if (ret) {
+                       dev_err(&vibrator->input->dev,
+                               "Failed to enable clock: %d\n", ret);
+                       goto unlock;
+               }
+
+               ret = regulator_enable(vibrator->vcc);
+               if (ret) {
+                       dev_err(&vibrator->input->dev,
+                               "Failed to enable regulator: %d\n", ret);
+                       clk_disable(vibrator->clk);
+                       goto unlock;
+               }
+
+               gpiod_set_value_cansleep(vibrator->enable_gpio, 1);
+
+               vibrator->enabled = true;
+       }
+
+       d_reg_val = 127 - ((126 * vibrator->magnitude) / 0xffff);
+       msm_vibrator_write(vibrator, REG_CFG_RCGR,
+                          (2 << 12) | /* dual edge mode */
+                          (0 << 8) |  /* cxo */
+                          (7 << 0));
+       msm_vibrator_write(vibrator, REG_M, 1);
+       msm_vibrator_write(vibrator, REG_N, 128);
+       msm_vibrator_write(vibrator, REG_D, d_reg_val);
+       msm_vibrator_write(vibrator, REG_CMD_RCGR, 1);
+       msm_vibrator_write(vibrator, REG_CBCR, 1);
+
+unlock:
+       mutex_unlock(&vibrator->mutex);
+
+       return ret;
+}
+
+static void msm_vibrator_stop(struct msm_vibrator *vibrator)
+{
+       mutex_lock(&vibrator->mutex);
+
+       if (vibrator->enabled) {
+               gpiod_set_value_cansleep(vibrator->enable_gpio, 0);
+               regulator_disable(vibrator->vcc);
+               clk_disable(vibrator->clk);
+               vibrator->enabled = false;
+       }
+
+       mutex_unlock(&vibrator->mutex);
+}
+
+static void msm_vibrator_worker(struct work_struct *work)
+{
+       struct msm_vibrator *vibrator = container_of(work,
+                                                    struct msm_vibrator,
+                                                    worker);
+
+       if (vibrator->magnitude)
+               msm_vibrator_start(vibrator);
+       else
+               msm_vibrator_stop(vibrator);
+}
+
+static int msm_vibrator_play_effect(struct input_dev *dev, void *data,
+                                   struct ff_effect *effect)
+{
+       struct msm_vibrator *vibrator = input_get_drvdata(dev);
+
+       mutex_lock(&vibrator->mutex);
+
+       if (effect->u.rumble.strong_magnitude > 0)
+               vibrator->magnitude = effect->u.rumble.strong_magnitude;
+       else
+               vibrator->magnitude = effect->u.rumble.weak_magnitude;
+
+       mutex_unlock(&vibrator->mutex);
+
+       schedule_work(&vibrator->worker);
+
+       return 0;
+}
+
+static void msm_vibrator_close(struct input_dev *input)
+{
+       struct msm_vibrator *vibrator = input_get_drvdata(input);
+
+       cancel_work_sync(&vibrator->worker);
+       msm_vibrator_stop(vibrator);
+}
+
+static int msm_vibrator_probe(struct platform_device *pdev)
+{
+       struct msm_vibrator *vibrator;
+       struct resource *res;
+       int ret;
+
+       vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL);
+       if (!vibrator)
+               return -ENOMEM;
+
+       vibrator->input = devm_input_allocate_device(&pdev->dev);
+       if (!vibrator->input)
+               return -ENOMEM;
+
+       vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
+       if (IS_ERR(vibrator->vcc)) {
+               if (PTR_ERR(vibrator->vcc) != -EPROBE_DEFER)
+                       dev_err(&pdev->dev, "Failed to get regulator: %ld\n",
+                               PTR_ERR(vibrator->vcc));
+               return PTR_ERR(vibrator->vcc);
+       }
+
+       vibrator->enable_gpio = devm_gpiod_get(&pdev->dev, "enable",
+                                              GPIOD_OUT_LOW);
+       if (IS_ERR(vibrator->enable_gpio)) {
+               if (PTR_ERR(vibrator->enable_gpio) != -EPROBE_DEFER)
+                       dev_err(&pdev->dev, "Failed to get enable gpio: %ld\n",
+                               PTR_ERR(vibrator->enable_gpio));
+               return PTR_ERR(vibrator->enable_gpio);
+       }
+
+       vibrator->clk = devm_clk_get(&pdev->dev, "pwm");
+       if (IS_ERR(vibrator->clk)) {
+               if (PTR_ERR(vibrator->clk) != -EPROBE_DEFER)
+                       dev_err(&pdev->dev, "Failed to lookup pwm clock: %ld\n",
+                               PTR_ERR(vibrator->clk));
+               return PTR_ERR(vibrator->clk);
+       }
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               dev_err(&pdev->dev, "Failed to get platform resource\n");
+               return -ENODEV;
+       }
+
+       vibrator->base = devm_ioremap(&pdev->dev, res->start,
+                                    resource_size(res));
+       if (!vibrator->base) {
+               dev_err(&pdev->dev, "Failed to iomap resource: %ld\n",
+                       PTR_ERR(vibrator->base));
+               return -ENOMEM;
+       }
+
+       vibrator->enabled = false;
+       mutex_init(&vibrator->mutex);
+       INIT_WORK(&vibrator->worker, msm_vibrator_worker);
+
+       vibrator->input->name = "msm-vibrator";
+       vibrator->input->id.bustype = BUS_HOST;
+       vibrator->input->close = msm_vibrator_close;
+
+       input_set_drvdata(vibrator->input, vibrator);
+       input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
+
+       ret = input_ff_create_memless(vibrator->input, NULL,
+                                     msm_vibrator_play_effect);
+       if (ret) {
+               dev_err(&pdev->dev, "Failed to create ff memless: %d", ret);
+               return ret;
+       }
+
+       ret = input_register_device(vibrator->input);
+       if (ret) {
+               dev_err(&pdev->dev, "Failed to register input device: %d", ret);
+               return ret;
+       }
+
+       platform_set_drvdata(pdev, vibrator);
+
+       return 0;
+}
+
+static int __maybe_unused msm_vibrator_suspend(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct msm_vibrator *vibrator = platform_get_drvdata(pdev);
+
+       cancel_work_sync(&vibrator->worker);
+
+       if (vibrator->enabled)
+               msm_vibrator_stop(vibrator);
+
+       return 0;
+}
+
+static int __maybe_unused msm_vibrator_resume(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct msm_vibrator *vibrator = platform_get_drvdata(pdev);
+
+       if (vibrator->enabled)
+               msm_vibrator_start(vibrator);
+
+       return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(msm_vibrator_pm_ops, msm_vibrator_suspend,
+                        msm_vibrator_resume);
+
+static const struct of_device_id msm_vibrator_of_match[] = {
+       { .compatible = "qcom,msm8226-vibrator" },
+       { .compatible = "qcom,msm8974-vibrator" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, msm_vibrator_of_match);
+
+static struct platform_driver msm_vibrator_driver = {
+       .probe  = msm_vibrator_probe,
+       .driver = {
+               .name = "msm-vibrator",
+               .pm = &msm_vibrator_pm_ops,
+               .of_match_table = of_match_ptr(msm_vibrator_of_match),
+       },
+};
+module_platform_driver(msm_vibrator_driver);
+
+MODULE_AUTHOR("Brian Masney <masneyb@onstation.org>");
+MODULE_DESCRIPTION("Qualcomm MSM vibrator driver");
+MODULE_LICENSE("GPL");