conf/ucm: bytcr-rt5640: Add generic bytcr-rt5640 UCM profile

This commit adds the generic UCM profile for bytcr-rt5640 boards from:
https://github.com/plbossart/UCM, plus the fixes from this pull-req:
https://github.com/plbossart/UCM/pull/31

The profile has been split up into separate per input / output files to
allow for creation of long-name profiles with the specific input / output
combinations found on a board without needing to copy and paste things.

Note this profile exports all inputs and both stereo/mono speaker setups
even though a typical device will not use all. Ideally a long-name based
device specific profile made up of the various parts should be used
instead.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

diff --git a/configure.ac b/configure.ac
index 693b5d5..f6ee6ca 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -720,6 +720,8 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \
          src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/Makefile \
          src/conf/ucm/broadwell-rt286/Makefile \
          src/conf/ucm/broxton-rt298/Makefile \
+         src/conf/ucm/bytcr/Makefile \
+         src/conf/ucm/bytcr-rt5640/Makefile \
          src/conf/ucm/bytcr-rt5651/Makefile \
          src/conf/ucm/chtrt5645/Makefile \
          src/conf/ucm/chtrt5645-mono-speaker-analog-mic/Makefile \
@@ -734,6 +736,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \
          src/conf/ucm/PandaBoard/Makefile \
          src/conf/ucm/PandaBoardES/Makefile \
          src/conf/ucm/PAZ00/Makefile \
+         src/conf/ucm/rt5640/Makefile \
          src/conf/ucm/SDP4430/Makefile \
          src/conf/ucm/skylake-rt286/Makefile \
          src/conf/ucm/TECLAST-X80Pro-Defaultstring-CherryTrailCR/Makefile \

diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am
index 38fc6b2..dc2d685 100644 (file)
--- a/src/conf/ucm/Makefile.am
+++ b/src/conf/ucm/Makefile.am
@@ -2,6 +2,8 @@ SUBDIRS=\
 ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN \
 broadwell-rt286 \
 broxton-rt298 \
+bytcr \
+bytcr-rt5640 \
 bytcr-rt5651 \
 chtrt5645 \
 chtrt5645-mono-speaker-analog-mic \
@@ -16,6 +18,7 @@ LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216 \
 PandaBoard \
 PandaBoardES \
 PAZ00 \
+rt5640 \
 SDP4430 \
 skylake-rt286 \
 TECLAST-X80Pro-Defaultstring-CherryTrailCR \

diff --git a/src/conf/ucm/bytcr-rt5640/HiFi.conf b/src/conf/ucm/bytcr-rt5640/HiFi.conf
new file mode 100644 (file)
index 0000000..130671c
--- /dev/null
+++ b/src/conf/ucm/bytcr-rt5640/HiFi.conf
@@ -0,0 +1,29 @@
+# Use case Configuration for bytcr-rt5640
+
+<searchdir:ucm>
+
+SectionVerb {
+       EnableSequence [
+               cdev "hw:bytcrrt5640"
+
+               <bytcr/PlatformEnableSeq.conf>
+               <rt5640/EnableSeq.conf>
+       ]
+
+       DisableSequence [
+       ]
+
+       Value {
+               PlaybackPCM "hw:bytcrrt5640"
+               CapturePCM "hw:bytcrrt5640"
+       }
+}
+
+<rt5640/Speaker.conf>
+<rt5640/MonoSpeaker.conf>
+<rt5640/HeadPhones.conf>
+
+<rt5640/DigitalMics.conf>
+<rt5640/IN1-InternalMic.conf>
+<rt5640/IN3-InternalMic.conf>
+<rt5640/HeadsetMic.conf>

diff --git a/src/conf/ucm/bytcr-rt5640/Makefile.am b/src/conf/ucm/bytcr-rt5640/Makefile.am
new file mode 100644 (file)
index 0000000..84ddf7b
--- /dev/null
+++ b/src/conf/ucm/bytcr-rt5640/Makefile.am
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/bytcr-rt5640
+ucm_DATA = bytcr-rt5640.conf HiFi.conf
+EXTRA_DIST = $(ucm_DATA)

diff --git a/src/conf/ucm/bytcr-rt5640/bytcr-rt5640.conf b/src/conf/ucm/bytcr-rt5640/bytcr-rt5640.conf
new file mode 100644 (file)
index 0000000..676b4fd
--- /dev/null
+++ b/src/conf/ucm/bytcr-rt5640/bytcr-rt5640.conf
@@ -0,0 +1,8 @@
+SectionUseCase."HiFi" {
+       File "HiFi.conf"
+       Comment "Play HiFi quality Music"
+}
+
+SectionDefaults [
+       cdev "hw:bytcrrt5640"
+]

diff --git a/src/conf/ucm/bytcr/Makefile.am b/src/conf/ucm/bytcr/Makefile.am
new file mode 100644 (file)
index 0000000..a0e5545
--- /dev/null
+++ b/src/conf/ucm/bytcr/Makefile.am
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/bytcr
+ucm_DATA = PlatformEnableSeq.conf
+EXTRA_DIST = $(ucm_DATA)

diff --git a/src/conf/ucm/bytcr/PlatformEnableSeq.conf b/src/conf/ucm/bytcr/PlatformEnableSeq.conf
new file mode 100644 (file)
index 0000000..b5ee2b4
--- /dev/null
+++ b/src/conf/ucm/bytcr/PlatformEnableSeq.conf
@@ -0,0 +1,115 @@
+# media mixer settings
+#   compress
+cset "name='media0_in Gain 0 Switch' on"
+cset "name='media0_in Gain 0 Volume' 0"
+
+#   normal
+cset "name='media1_in Gain 0 Switch' on"
+cset "name='media1_in Gain 0 Volume' 0"
+#   swm loopback
+cset "name='media2_in Gain 0 Switch' off"
+cset "name='media2_in Gain 0 Volume' 0%"
+#   deep buffer
+cset "name='media3_in Gain 0 Switch' on"
+cset "name='media3_in Gain 0 Volume' 0"
+
+cset "name='media0_out mix 0 media0_in Switch' on"
+cset "name='media0_out mix 0 media1_in Switch' on"
+cset "name='media0_out mix 0 media2_in Switch' off"
+cset "name='media0_out mix 0 media3_in Switch' on"
+
+cset "name='media1_out mix 0 media0_in Switch' off"
+cset "name='media1_out mix 0 media1_in Switch' off"
+cset "name='media1_out mix 0 media2_in Switch' off"
+cset "name='media1_out mix 0 media3_in Switch' off"
+
+cset "name='pcm0_in Gain 0 Switch' on"
+cset "name='pcm0_in Gain 0 Volume' 0"
+
+cset "name='pcm1_in Gain 0 Switch' off"
+cset "name='pcm1_in Gain 0 Volume' 0%"
+
+# codec0_out settings (used if SSP2 is connected)
+cset "name='codec_out0 mix 0 codec_in0 Switch' off"
+cset "name='codec_out0 mix 0 codec_in1 Switch' off"
+cset "name='codec_out0 mix 0 media_loop1_in Switch' off"
+cset "name='codec_out0 mix 0 media_loop2_in Switch' off"
+cset "name='codec_out0 mix 0 pcm0_in Switch' on"
+cset "name='codec_out0 mix 0 pcm1_in Switch' off"
+cset "name='codec_out0 mix 0 sprot_loop_in Switch' off"
+cset "name='codec_out0 Gain 0 Switch' on"
+cset "name='codec_out0 Gain 0 Volume' 0"
+
+# modem_out settings (used if SSP0 is connected)
+cset "name='modem_out mix 0 codec_in0 Switch' off"
+cset "name='modem_out mix 0 codec_in1 Switch' off"
+cset "name='modem_out mix 0 media_loop1_in Switch' off"
+cset "name='modem_out mix 0 media_loop2_in Switch' off"
+cset "name='modem_out mix 0 pcm0_in Switch' on"
+cset "name='modem_out mix 0 pcm1_in Switch' off"
+cset "name='modem_out mix 0 sprot_loop_in Switch' off"
+cset "name='modem_out Gain 0 Switch' on"
+cset "name='modem_out Gain 0 Volume' 0"
+
+# input settings
+
+# input used when SSP2 is connected
+cset "name='codec_in0 Gain 0 Switch' on"
+cset "name='codec_in0 Gain 0 Volume' 0"
+
+# input used when SSP0 is connected
+cset "name='modem_in Gain 0 Switch' on"
+cset "name='modem_in Gain 0 Volume' 0"
+
+# pcm1_out settings
+cset "name='pcm1_out mix 0 codec_in0 Switch' on"
+cset "name='pcm1_out mix 0 modem_in Switch' on"
+cset "name='pcm1_out mix 0 codec_in1 Switch' off"
+cset "name='pcm1_out mix 0 media_loop1_in Switch' off"
+cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
+cset "name='pcm1_out mix 0 pcm0_in Switch' off"
+cset "name='pcm1_out mix 0 pcm1_in Switch' off"
+cset "name='pcm1_out mix 0 sprot_loop_in Switch' off"
+
+cset "name='pcm1_out Gain 0 Switch' on"
+cset "name='pcm1_out Gain 0 Volume' 0"
+
+# disable codec_out1
+cset "name='codec_out1 mix 0 codec_in0 Switch' off"
+cset "name='codec_out1 mix 0 codec_in1 Switch' off"
+cset "name='codec_out1 mix 0 media_loop1_in Switch' off"
+cset "name='codec_out1 mix 0 media_loop2_in Switch' off"
+cset "name='codec_out1 mix 0 pcm0_in Switch' off"
+cset "name='codec_out1 mix 0 pcm1_in Switch' off"
+cset "name='codec_out1 mix 0 sprot_loop_in Switch' off"
+cset "name='codec_out1 Gain 0 Switch' off"
+cset "name='codec_out1 Gain 0 Volume' 0%"
+
+# disable codec_in1
+cset "name='codec_in1 Gain 0 Switch' off"
+cset "name='codec_in1 Gain 0 Volume' 0%"
+
+# disable all loops
+cset "name='media_loop1_out mix 0 codec_in0 Switch' off"
+cset "name='media_loop1_out mix 0 codec_in1 Switch' off"
+cset "name='media_loop1_out mix 0 media_loop1_in Switch' off"
+cset "name='media_loop1_out mix 0 media_loop2_in Switch' off"
+cset "name='media_loop1_out mix 0 pcm0_in Switch' off"
+cset "name='media_loop1_out mix 0 pcm1_in Switch' off"
+cset "name='media_loop1_out mix 0 sprot_loop_in Switch' off"
+
+cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
+cset "name='media_loop2_out mix 0 codec_in1 Switch' off"
+cset "name='media_loop2_out mix 0 media_loop1_in Switch' off"
+cset "name='media_loop2_out mix 0 media_loop2_in Switch' off"
+cset "name='media_loop2_out mix 0 pcm0_in Switch' off"
+cset "name='media_loop2_out mix 0 pcm1_in Switch' off"
+cset "name='media_loop2_out mix 0 sprot_loop_in Switch' off"
+
+cset "name='sprot_loop_out mix 0 codec_in0 Switch' off"
+cset "name='sprot_loop_out mix 0 codec_in1 Switch' off"
+cset "name='sprot_loop_out mix 0 media_loop1_in Switch' off"
+cset "name='sprot_loop_out mix 0 media_loop2_in Switch' off"
+cset "name='sprot_loop_out mix 0 pcm0_in Switch' off"
+cset "name='sprot_loop_out mix 0 pcm1_in Switch' off"
+cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off"

diff --git a/src/conf/ucm/rt5640/DigitalMics.conf b/src/conf/ucm/rt5640/DigitalMics.conf
new file mode 100644 (file)
index 0000000..c7d5409
--- /dev/null
+++ b/src/conf/ucm/rt5640/DigitalMics.conf
@@ -0,0 +1,31 @@
+SectionDevice."DigitalMics" {
+       Comment "DigitalMics capture"
+
+       ConflictingDevice [
+               "IN1-InternalMics"
+               "IN3-InternalMics"
+               "HeadsetMic"
+       ]
+
+       EnableSequence [
+               cdev "hw:bytcrrt5640"
+
+               cset "name='Stereo ADC MIXL ADC2 Switch' on"
+               cset "name='Stereo ADC MIXR ADC2 Switch' on"
+               cset "name='Internal Mic Switch' on"
+
+       ]
+
+       DisableSequence [
+               cdev "hw:bytcrrt5640"
+
+               cset "name='Stereo ADC MIXL ADC2 Switch' off"
+               cset "name='Stereo ADC MIXR ADC2 Switch' off"
+               cset "name='Internal Mic Switch' off"
+
+       ]
+
+       Value {
+               CaptureChannels 2
+       }
+}

diff --git a/src/conf/ucm/rt5640/EnableSeq.conf b/src/conf/ucm/rt5640/EnableSeq.conf
new file mode 100644 (file)
index 0000000..62795fa
--- /dev/null
+++ b/src/conf/ucm/rt5640/EnableSeq.conf
@@ -0,0 +1,41 @@
+# RT5640 default output routing
+cset "name='OUT MIXL DAC L1 Switch'  on"
+cset "name='OUT MIXR DAC R1 Switch'  on"
+
+# uncomment for loopback mic->speakers
+# cset "name='SPOL MIX BST1 Switch' on"
+# cset "name='SPOR MIX BST1 Switch' on"
+
+# uncomment for loopback playback -> capture
+# cset "name='RECMIXL OUT MIXL Switch' on"
+# cset "name='RECMIXR OUT MIXR Switch' on"
+
+# uncomment to enable swap between AIF1 and AIF2
+# warning: can only work with SSP0 firmware enabled
+cset "name='SDI select' 0"
+cset "name='DAI select' 0"
+#cset "name='SDI select' 1"
+#cset "name='DAI select' 1"
+
+cset "name='DAC2 Playback Switch' on"
+cset "name='DIG MIXL DAC L2 Switch' on"
+
+# Input Configuration
+cset "name='Stereo ADC1 Mux' ADC"
+cset "name='Stereo ADC2 Mux' DMIC1"
+cset "name='Mono ADC L1 Mux' 1"
+cset "name='Mono ADC R1 Mux' 1"
+
+# 47=0dB, 0.375 dB/step, set it to 6 dB to help with soft mics
+cset "name='ADC Capture Volume' 63"
+# Set ADC Boost Gain to 3dB higher vals result in too much noise
+cset "name='ADC Boost Gain' 1"
+# Set IN1/IN3 internal mic boost to 8 (max)
+# Set IN2 headset-mic boost to 1, headset mics are quite loud
+cset "name='IN1 Boost' 8"
+cset "name='IN2 Boost' 1"
+cset "name='IN3 Boost' 8"
+
+cset "name='Internal Mic Switch' off"
+cset "name='Headset Mic Switch' off"
+cset "name='ADC Capture Switch' on"

diff --git a/src/conf/ucm/rt5640/HeadPhones.conf b/src/conf/ucm/rt5640/HeadPhones.conf
new file mode 100644 (file)
index 0000000..0e7149e
--- /dev/null
+++ b/src/conf/ucm/rt5640/HeadPhones.conf
@@ -0,0 +1,41 @@
+SectionDevice."Headphones" {
+       Comment "Headphones playback"
+
+       ConflictingDevice [
+               "Speaker"
+               "MonoSpeaker"
+       ]
+
+       EnableSequence [
+               cdev "hw:bytcrrt5640"
+
+               cset "name='DAC MIXL INF1 Switch'  on"
+               cset "name='DAC MIXR INF1 Switch'  on"
+               cset "name='Stereo DAC MIXL DAC L1 Switch'  on"
+               cset "name='Stereo DAC MIXR DAC R1 Switch'  on"
+               cset "name='Stereo DAC MIXL DAC L2 Switch'  on"
+               cset "name='Stereo DAC MIXR DAC R2 Switch'  on"
+               cset "name='HPO MIX HPVOL Switch'  on"
+               cset "name='Headphone Switch'  on"
+               cset "name='HP Channel Switch' on"
+               cset "name='Speaker Switch' off"
+               cset "name='HP L Playback Switch' on"
+               cset "name='HP R Playback Switch' on"
+               cset "name='HP Playback Volume' 29"
+
+       ]
+
+       DisableSequence [
+               cdev "hw:bytcrrt5640"
+               cset "name='Headphone Switch' off"
+               cset "name='HP Channel Switch' off"
+               cset "name='HP L Playback Switch' off"
+               cset "name='HP R Playback Switch' off"
+               cset "name='HP Playback Volume' 0"
+       ]
+
+       Value {
+               PlaybackChannels "2"
+               JackControl "Headphone Jack"
+       }
+}

diff --git a/src/conf/ucm/rt5640/HeadsetMic.conf b/src/conf/ucm/rt5640/HeadsetMic.conf
new file mode 100644 (file)
index 0000000..4d54eed
--- /dev/null
+++ b/src/conf/ucm/rt5640/HeadsetMic.conf
@@ -0,0 +1,48 @@
+SectionDevice."HeadsetMic" {
+       Comment "Headset Mic capture"
+
+       ConflictingDevice [
+               "IN1-InternalMics"
+               "IN3-InternalMics"
+               "DigitalMics"
+       ]
+
+       EnableSequence [
+               cdev "hw:bytcrrt5640"
+
+               cset "name='Headset Mic Switch' on"
+
+               cset "name='RECMIXL BST2 Switch' on"
+               cset "name='RECMIXR BST2 Switch' on"
+
+               cset "name='Stereo ADC MIXL ADC1 Switch' on"
+               cset "name='Stereo ADC MIXR ADC1 Switch' on"
+
+               cset "name='Mono ADC MIXL ADC1 Switch' on"
+               cset "name='Mono ADC MIXR ADC1 Switch' on"
+
+               cset "name='Mono ADC Capture Switch' on"
+       ]
+
+       DisableSequence [
+               cdev "hw:bytcrrt5640"
+
+               cset "name='Stereo ADC MIXL ADC1 Switch' off"
+               cset "name='Stereo ADC MIXR ADC1 Switch' off"
+
+               cset "name='RECMIXL BST2 Switch' off"
+               cset "name='RECMIXR BST2 Switch' off"
+
+               cset "name='Headset Mic Switch' off"
+
+               cset "name='Mono ADC MIXL ADC1 Switch' off"
+               cset "name='Mono ADC MIXR ADC1 Switch' off"
+
+               cset "name='Mono ADC Capture Switch' off"
+       ]
+
+       Value {
+               CaptureChannels 2
+               JackControl "Headset Mic Jack"
+       }
+}

diff --git a/src/conf/ucm/rt5640/IN1-InternalMic.conf b/src/conf/ucm/rt5640/IN1-InternalMic.conf
new file mode 100644 (file)
index 0000000..d18c21d
--- /dev/null
+++ b/src/conf/ucm/rt5640/IN1-InternalMic.conf
@@ -0,0 +1,50 @@
+SectionDevice."IN1-InternalMics" {
+       Comment "Internal IN1 analog Mic capture"
+
+       ConflictingDevice [
+               "DigitalMics"
+               "HeadsetMic"
+               "IN3-InternalMics"
+       ]
+
+       EnableSequence [
+               cdev "hw:bytcrrt5640"
+
+               cset "name='Internal Mic Switch' on"
+
+               cset "name='RECMIXL BST1 Switch' on"
+               cset "name='RECMIXR BST1 Switch' on"
+               cset "name='RECMIXL BST3 Switch' off"
+               cset "name='RECMIXR BST3 Switch' off"
+
+               cset "name='Stereo ADC MIXL ADC1 Switch' on"
+               cset "name='Stereo ADC MIXR ADC1 Switch' on"
+
+               cset "name='Mono ADC MIXL ADC1 Switch' on"
+               cset "name='Mono ADC MIXR ADC1 Switch' on"
+
+               cset "name='Mono ADC Capture Switch' on"
+       ]
+
+       DisableSequence [
+               cdev "hw:bytcrrt5640"
+
+               cset "name='Stereo ADC MIXL ADC1 Switch' off"
+               cset "name='Stereo ADC MIXR ADC1 Switch' off"
+
+               cset "name='RECMIXL BST1 Switch' off"
+               cset "name='RECMIXR BST1 Switch' off"
+
+               cset "name='Internal Mic Switch' off"
+
+               cset "name='Mono ADC MIXL ADC1 Switch' off"
+               cset "name='Mono ADC MIXR ADC1 Switch' off"
+
+               cset "name='Mono ADC Capture Switch' off"
+
+       ]
+
+       Value {
+               CaptureChannels 2
+       }
+}

diff --git a/src/conf/ucm/rt5640/IN3-InternalMic.conf b/src/conf/ucm/rt5640/IN3-InternalMic.conf
new file mode 100644 (file)
index 0000000..17d8522
--- /dev/null
+++ b/src/conf/ucm/rt5640/IN3-InternalMic.conf
@@ -0,0 +1,50 @@
+SectionDevice."IN3-InternalMics" {
+       Comment "Internal IN3 analog Mic capture"
+
+       ConflictingDevice [
+               "DigitalMics"
+               "HeadsetMic"
+               "IN1-InternalMics"
+       ]
+
+       EnableSequence [
+               cdev "hw:bytcrrt5640"
+
+               cset "name='Internal Mic Switch' on"
+
+               cset "name='RECMIXL BST1 Switch' off"
+               cset "name='RECMIXR BST1 Switch' off"
+               cset "name='RECMIXL BST3 Switch' on"
+               cset "name='RECMIXR BST3 Switch' on"
+
+               cset "name='Stereo ADC MIXL ADC1 Switch' on"
+               cset "name='Stereo ADC MIXR ADC1 Switch' on"
+
+               cset "name='Mono ADC MIXL ADC1 Switch' on"
+               cset "name='Mono ADC MIXR ADC1 Switch' on"
+
+               cset "name='Mono ADC Capture Switch' on"
+
+       ]
+
+       DisableSequence [
+               cdev "hw:bytcrrt5640"
+
+               cset "name='Stereo ADC MIXL ADC1 Switch' off"
+               cset "name='Stereo ADC MIXR ADC1 Switch' off"
+
+               cset "name='RECMIXL BST3 Switch' off"
+               cset "name='RECMIXR BST3 Switch' off"
+
+               cset "name='Internal Mic Switch' off"
+
+               cset "name='Mono ADC MIXL ADC1 Switch' off"
+               cset "name='Mono ADC MIXR ADC1 Switch' off"
+
+               cset "name='Mono ADC Capture Switch' off"
+       ]
+
+       Value {
+               CaptureChannels 2
+       }
+}

diff --git a/src/conf/ucm/rt5640/Makefile.am b/src/conf/ucm/rt5640/Makefile.am
new file mode 100644 (file)
index 0000000..a6fbdc5
--- /dev/null
+++ b/src/conf/ucm/rt5640/Makefile.am
@@ -0,0 +1,5 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/rt5640
+ucm_DATA = DigitalMics.conf EnableSeq.conf HeadPhones.conf HeadsetMic.conf \
+       IN1-InternalMic.conf IN3-InternalMic.conf MonoSpeaker.conf Speaker.conf
+EXTRA_DIST = $(ucm_DATA)

diff --git a/src/conf/ucm/rt5640/MonoSpeaker.conf b/src/conf/ucm/rt5640/MonoSpeaker.conf
new file mode 100644 (file)
index 0000000..0fb5403
--- /dev/null
+++ b/src/conf/ucm/rt5640/MonoSpeaker.conf
@@ -0,0 +1,45 @@
+SectionDevice."MonoSpeaker" {
+       Comment "MonoSpeaker playback"
+
+       ConflictingDevice [
+               "Headphones"
+               "Speaker"
+       ]
+
+       EnableSequence [
+               cdev "hw:bytcrrt5640"
+
+               cset "name='DAC MIXL INF1 Switch' on"
+               cset "name='DAC MIXR INF1 Switch' on"
+               cset "name='Stereo DAC MIXL DAC L1 Switch' on"
+               cset "name='Stereo DAC MIXR DAC R1 Switch' on"
+               cset "name='Stereo DAC MIXL DAC L2 Switch'  on"
+               cset "name='Stereo DAC MIXR DAC R2 Switch'  on"
+               cset "name='SPK MIXL DAC L1 Switch' on"
+               cset "name='SPK MIXR DAC R1 Switch' on"
+               cset "name='SPOL MIX SPKVOL L Switch' on"
+# for mono speaker we apply left on right
+#              cset "name='SPOR MIX SPKVOL R Switch' on"
+               cset "name='SPOL MIX SPKVOL R Switch' on"
+               cset "name='Speaker Switch' on"
+               cset "name='Speaker Channel Switch' on"
+               cset "name='Headphone Switch' off"
+               cset "name='Speaker L Playback Switch' on"
+               cset "name='Speaker R Playback Switch' on"
+               cset "name='Speaker Playback Volume' 35"
+
+       ]
+
+       DisableSequence [
+               cdev "hw:bytcrrt5640"
+               cset "name='Speaker Switch' off"
+               cset "name='Speaker Channel Switch' off"
+               cset "name='Speaker L Playback Switch' off"
+               cset "name='Speaker R Playback Switch' off"
+               cset "name='Speaker Playback Volume' 0"
+       ]
+
+       Value {
+               PlaybackChannels "2"
+       }
+}

diff --git a/src/conf/ucm/rt5640/Speaker.conf b/src/conf/ucm/rt5640/Speaker.conf
new file mode 100644 (file)
index 0000000..b745ed0
--- /dev/null
+++ b/src/conf/ucm/rt5640/Speaker.conf
@@ -0,0 +1,45 @@
+SectionDevice."Speaker" {
+       Comment "Speaker playback"
+
+       ConflictingDevice [
+               "Headphones"
+               "MonoSpeaker"
+       ]
+
+       EnableSequence [
+               cdev "hw:bytcrrt5640"
+
+               cset "name='DAC MIXL INF1 Switch' on"
+               cset "name='DAC MIXR INF1 Switch' on"
+               cset "name='Stereo DAC MIXL DAC L1 Switch' on"
+               cset "name='Stereo DAC MIXR DAC R1 Switch' on"
+               cset "name='Stereo DAC MIXL DAC L2 Switch'  on"
+               cset "name='Stereo DAC MIXR DAC R2 Switch'  on"
+               cset "name='SPK MIXL DAC L1 Switch' on"
+               cset "name='SPK MIXR DAC R1 Switch' on"
+               cset "name='SPOL MIX SPKVOL L Switch' on"
+               cset "name='SPOR MIX SPKVOL R Switch' on"
+               # undo MonoSpeaker mixing of right channel to left speaker
+               cset "name='SPOL MIX SPKVOL R Switch' off"
+               cset "name='Speaker Switch' on"
+               cset "name='Speaker Channel Switch' on"
+               cset "name='Headphone Switch' off"
+               cset "name='Speaker L Playback Switch' on"
+               cset "name='Speaker R Playback Switch' on"
+               cset "name='Speaker Playback Volume' 35"
+
+       ]
+
+       DisableSequence [
+               cdev "hw:bytcrrt5640"
+               cset "name='Speaker Switch' off"
+               cset "name='Speaker Channel Switch' off"
+               cset "name='Speaker L Playback Switch' off"
+               cset "name='Speaker R Playback Switch' off"
+               cset "name='Speaker Playback Volume' 0"
+       ]
+
+       Value {
+               PlaybackChannels "2"
+       }
+}