For more information and documentation on this module you can visit:
- http://wireless.kernel.org/en/users/Drivers/ath
+ https://wireless.wiki.kernel.org/en/users/Drivers/ath
For information on all Atheros wireless drivers visit:
- http://wireless.kernel.org/en/users/Drivers/Atheros
+ https://wireless.wiki.kernel.org/en/users/Drivers/Atheros
if WLAN_VENDOR_ATH
APs that come with these cards refer to ath9k wiki
products page:
- http://wireless.kernel.org/en/users/Drivers/ath9k/products
+ https://wireless.wiki.kernel.org/en/users/Drivers/ath9k/products
If you choose to build a module, it'll be called ath9k.
Support for Atheros HTC based cards.
Chipsets supported: AR9271
- For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
+ For more information:
+ https://wireless.wiki.kernel.org/en/users/Drivers/ath9k_htc
The built module will be ath9k_htc.
* of tests. The testing requirements are going to be documented. Desired
* test requirements are documented at:
*
- * http://wireless.kernel.org/en/users/Drivers/ath9k/dfs
+ * https://wireless.wiki.kernel.org/en/users/Drivers/ath9k/dfs
*
* Once a new chipset gets properly tested an individual commit can be used
* to document the testing for DFS for that chipset.
It needs a special firmware (carl9170-1.fw), which can be downloaded
from our wiki here:
- <http://wireless.kernel.org/en/users/Drivers/carl9170>
+ <https://wireless.wiki.kernel.org/en/users/Drivers/carl9170>
If you choose to build a module, it'll be called carl9170.
* Note:
*
* Always update our wiki's device list (located at:
- * http://wireless.kernel.org/en/users/Drivers/ar9170/devices ),
+ * https://wireless.wiki.kernel.org/en/users/Drivers/ar9170/devices ),
* whenever you add a new device.
*/
static const struct usb_device_id carl9170_usb_ids[] = {
wil6210 chip by Wilocity. It supports operation on the
60 GHz band, covered by the IEEE802.11ad standard.
- http://wireless.kernel.org/en/users/Drivers/wil6210
+ https://wireless.wiki.kernel.org/en/users/Drivers/wil6210
If you choose to build it as a module, it will be called
wil6210