--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Meson GXL USB3 PHY and OTG mode detection driver
+ *
+ * Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+
+#define USB_R0 0x00
+ #define USB_R0_P30_FSEL_MASK GENMASK(5, 0)
+ #define USB_R0_P30_PHY_RESET BIT(6)
+ #define USB_R0_P30_TEST_POWERDOWN_HSP BIT(7)
+ #define USB_R0_P30_TEST_POWERDOWN_SSP BIT(8)
+ #define USB_R0_P30_ACJT_LEVEL_MASK GENMASK(13, 9)
+ #define USB_R0_P30_TX_BOOST_LEVEL_MASK GENMASK(16, 14)
+ #define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17)
+ #define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18)
+ #define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19)
+ #define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29)
+ #define USB_R0_U2D_ACT BIT(31)
+
+#define USB_R1 0x04
+ #define USB_R1_U3H_BIGENDIAN_GS BIT(0)
+ #define USB_R1_U3H_PME_ENABLE BIT(1)
+ #define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(6, 2)
+ #define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK GENMASK(11, 7)
+ #define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK GENMASK(15, 12)
+ #define USB_R1_U3H_HOST_U3_PORT_DISABLE BIT(16)
+ #define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT BIT(17)
+ #define USB_R1_U3H_HOST_MSI_ENABLE BIT(18)
+ #define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19)
+ #define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25)
+
+#define USB_R2 0x08
+ #define USB_R2_P30_CR_DATA_IN_MASK GENMASK(15, 0)
+ #define USB_R2_P30_CR_READ BIT(16)
+ #define USB_R2_P30_CR_WRITE BIT(17)
+ #define USB_R2_P30_CR_CAP_ADDR BIT(18)
+ #define USB_R2_P30_CR_CAP_DATA BIT(19)
+ #define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20)
+ #define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26)
+
+#define USB_R3 0x0c
+ #define USB_R3_P30_SSC_ENABLE BIT(0)
+ #define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1)
+ #define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4)
+ #define USB_R3_P30_REF_SSP_EN BIT(13)
+ #define USB_R3_P30_LOS_BIAS_MASK GENMASK(18, 16)
+ #define USB_R3_P30_LOS_LEVEL_MASK GENMASK(23, 19)
+ #define USB_R3_P30_MPLL_MULTIPLIER_MASK GENMASK(30, 24)
+
+#define USB_R4 0x10
+ #define USB_R4_P21_PORT_RESET_0 BIT(0)
+ #define USB_R4_P21_SLEEP_M0 BIT(1)
+ #define USB_R4_MEM_PD_MASK GENMASK(3, 2)
+ #define USB_R4_P21_ONLY BIT(4)
+
+#define USB_R5 0x14
+ #define USB_R5_ID_DIG_SYNC BIT(0)
+ #define USB_R5_ID_DIG_REG BIT(1)
+ #define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2)
+ #define USB_R5_ID_DIG_EN_0 BIT(4)
+ #define USB_R5_ID_DIG_EN_1 BIT(5)
+ #define USB_R5_ID_DIG_CURR BIT(6)
+ #define USB_R5_ID_DIG_IRQ BIT(7)
+ #define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8)
+ #define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16)
+
+/* read-only register */
+#define USB_R6 0x18
+ #define USB_R6_P30_CR_DATA_OUT_MASK GENMASK(15, 0)
+ #define USB_R6_P30_CR_ACK BIT(16)
+
+struct phy_meson_gxl_usb3_priv {
+ struct regmap *regmap;
+ enum phy_mode mode;
+ struct clk *clk_phy;
+ struct clk *clk_peripheral;
+ struct reset_control *reset;
+};
+
+static const struct regmap_config phy_meson_gxl_usb3_regmap_conf = {
+ .reg_bits = 8,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = USB_R6,
+};
+
+static int phy_meson_gxl_usb3_power_on(struct phy *phy)
+{
+ struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy);
+
+ regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_0,
+ USB_R5_ID_DIG_EN_0);
+ regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_1,
+ USB_R5_ID_DIG_EN_1);
+ regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_TH_MASK,
+ FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff));
+
+ return 0;
+}
+
+static int phy_meson_gxl_usb3_power_off(struct phy *phy)
+{
+ struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy);
+
+ regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_0, 0);
+ regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_1, 0);
+
+ return 0;
+}
+
+static int phy_meson_gxl_usb3_set_mode(struct phy *phy, enum phy_mode mode)
+{
+ struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy);
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ regmap_update_bits(priv->regmap, USB_R0, USB_R0_U2D_ACT, 0);
+ regmap_update_bits(priv->regmap, USB_R4, USB_R4_P21_SLEEP_M0,
+ 0);
+ break;
+
+ case PHY_MODE_USB_DEVICE:
+ regmap_update_bits(priv->regmap, USB_R0, USB_R0_U2D_ACT,
+ USB_R0_U2D_ACT);
+ regmap_update_bits(priv->regmap, USB_R4, USB_R4_P21_SLEEP_M0,
+ USB_R4_P21_SLEEP_M0);
+ break;
+
+ default:
+ dev_err(&phy->dev, "unsupported PHY mode %d\n", mode);
+ return -EINVAL;
+ }
+
+ priv->mode = mode;
+
+ return 0;
+}
+
+static int phy_meson_gxl_usb3_init(struct phy *phy)
+{
+ struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = reset_control_reset(priv->reset);
+ if (ret)
+ goto err;
+
+ ret = clk_prepare_enable(priv->clk_phy);
+ if (ret)
+ goto err;
+
+ ret = clk_prepare_enable(priv->clk_peripheral);
+ if (ret)
+ goto err_disable_clk_phy;
+
+ ret = phy_meson_gxl_usb3_set_mode(phy, priv->mode);
+ if (ret)
+ goto err_disable_clk_peripheral;
+
+ regmap_update_bits(priv->regmap, USB_R1,
+ USB_R1_U3H_FLADJ_30MHZ_REG_MASK,
+ FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20));
+
+ return 0;
+
+err_disable_clk_peripheral:
+ clk_disable_unprepare(priv->clk_peripheral);
+err_disable_clk_phy:
+ clk_disable_unprepare(priv->clk_phy);
+err:
+ return ret;
+}
+
+static int phy_meson_gxl_usb3_exit(struct phy *phy)
+{
+ struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(priv->clk_peripheral);
+ clk_disable_unprepare(priv->clk_phy);
+
+ return 0;
+}
+
+static const struct phy_ops phy_meson_gxl_usb3_ops = {
+ .power_on = phy_meson_gxl_usb3_power_on,
+ .power_off = phy_meson_gxl_usb3_power_off,
+ .set_mode = phy_meson_gxl_usb3_set_mode,
+ .init = phy_meson_gxl_usb3_init,
+ .exit = phy_meson_gxl_usb3_exit,
+ .owner = THIS_MODULE,
+};
+
+static int phy_meson_gxl_usb3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct phy_meson_gxl_usb3_priv *priv;
+ struct resource *res;
+ struct phy *phy;
+ struct phy_provider *phy_provider;
+ void __iomem *base;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ priv->regmap = devm_regmap_init_mmio(dev, base,
+ &phy_meson_gxl_usb3_regmap_conf);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ priv->clk_phy = devm_clk_get(dev, "phy");
+ if (IS_ERR(priv->clk_phy))
+ return PTR_ERR(priv->clk_phy);
+
+ priv->clk_peripheral = devm_clk_get(dev, "peripheral");
+ if (IS_ERR(priv->clk_peripheral))
+ return PTR_ERR(priv->clk_peripheral);
+
+ priv->reset = devm_reset_control_array_get_shared(dev);
+ if (IS_ERR(priv->reset))
+ return PTR_ERR(priv->reset);
+
+ /*
+ * default to host mode as hardware defaults and/or boot-loader
+ * behavior can result in this PHY starting up in device mode. this
+ * default and the initialization in phy_meson_gxl_usb3_init ensure
+ * that we reproducibly start in a known mode on all devices.
+ */
+ priv->mode = PHY_MODE_USB_HOST;
+
+ phy = devm_phy_create(dev, np, &phy_meson_gxl_usb3_ops);
+ if (IS_ERR(phy)) {
+ ret = PTR_ERR(phy);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to create PHY\n");
+
+ return ret;
+ }
+
+ phy_set_drvdata(phy, priv);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_meson_gxl_usb3_of_match[] = {
+ { .compatible = "amlogic,meson-gxl-usb3-phy", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb3_of_match);
+
+static struct platform_driver phy_meson_gxl_usb3_driver = {
+ .probe = phy_meson_gxl_usb3_probe,
+ .driver = {
+ .name = "phy-meson-gxl-usb3",
+ .of_match_table = phy_meson_gxl_usb3_of_match,
+ },
+};
+module_platform_driver(phy_meson_gxl_usb3_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Meson GXL USB3 PHY and OTG detection driver");
+MODULE_LICENSE("GPL v2");
OSDN Git Service
