help
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
-config ARCH_SHARK
- bool "Shark"
- select ARCH_USES_GETTIMEOFFSET
- select CPU_SA110
- select ISA
- select ISA_DMA
- select NEED_MACH_MEMORY_H
- select PCI
- select VIRT_TO_BUS
- select ZONE_DMA
- help
- Support for the StrongARM based Digital DNARD machine, also known
- as "Shark" (<http://www.shark-linux.de/shark.html>).
-
config ARCH_DAVINCI
bool "TI DaVinci"
select ARCH_HAS_HOLES_MEMORYMODEL
config PCI_SYSCALL
def_bool PCI
-# Select the host bridge type
-config PCI_HOST_VIA82C505
- bool
- depends on PCI && ARCH_SHARK
- default y
-
config PCI_HOST_ITE8152
bool
depends on PCI && MACH_ARMCORE
machine-$(CONFIG_ARCH_S5PC100) += s5pc100
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
-machine-$(CONFIG_ARCH_SHARK) += shark
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
machine-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile
machine-$(CONFIG_ARCH_SIRF) += prima2
OBJS += ll_char_wr.o font.o
endif
-ifeq ($(CONFIG_ARCH_SHARK),y)
-OBJS += head-shark.o ofw-shark.o
-endif
-
ifeq ($(CONFIG_ARCH_SA1100),y)
OBJS += head-sa1100.o
endif
+++ /dev/null
-/* The head-file for the Shark
- * by Alexander Schulz
- *
- * Does the following:
- * - get the memory layout from firmware. This can only be done as long as the mmu
- * is still on.
- * - switch the mmu off, so we have physical addresses
- * - copy the kernel to 0x08508000. This is done to have a fixed address where the
- * C-parts (misc.c) are executed. This address must be known at compile-time,
- * but the load-address of the kernel depends on how much memory is installed.
- * - Jump to this location.
- * - Set r8 with 0, r7 with the architecture ID for head.S
- */
-
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
- .section ".start", "ax"
-
- .arch armv4
- b __beginning
-
-__ofw_data: .long 0 @ the number of memory blocks
- .space 128 @ (startaddr,size) ...
- .space 128 @ bootargs
- .align
-
-__beginning: mov r4, r0 @ save the entry to the firmware
-
- mov r0, #0xC0 @ disable irq and fiq
- mov r1, r0
- mrs r3, cpsr
- bic r2, r3, r0
- eor r2, r2, r1
- msr cpsr_c, r2
-
- mov r0, r4 @ get the Memory layout from firmware
- adr r1, __ofw_data
- add r2, r1, #4
- mov lr, pc
- b ofw_init
- mov r1, #0
-
- adr r2, __mmu_off @ calculate physical address
- sub r2, r2, #0xf0000000 @ openprom maps us at f000 virt, 0e50 phys
- adr r0, __ofw_data
- ldr r0, [r0, #4]
- add r2, r2, r0
- add r2, r2, #0x00500000
-
- mrc p15, 0, r3, c1, c0
- bic r3, r3, #0xC @ Write Buffer and DCache
- bic r3, r3, #0x1000 @ ICache
- mcr p15, 0, r3, c1, c0 @ disabled
-
- mov r0, #0
- mcr p15, 0, r0, c7, c7 @ flush I,D caches on v4
- mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
- mcr p15, 0, r0, c8, c7 @ flush I,D TLBs on v4
-
- bic r3, r3, #0x1 @ MMU
- mcr p15, 0, r3, c1, c0 @ disabled
-
- mov pc, r2
-
-__copy_target: .long 0x08507FFC
-__copy_end: .long 0x08607FFC
-
- .word _start
- .word __bss_start
-
- .align
-__temp_stack: .space 128
-
-__mmu_off:
- adr r0, __ofw_data @ read the 1. entry of the memory map
- ldr r0, [r0, #4]
- orr r0, r0, #0x00600000
- sub r0, r0, #4
-
- ldr r1, __copy_end
- ldr r3, __copy_target
-
-/* r0 = 0x0e600000 (current end of kernelcode)
- * r3 = 0x08508000 (where it should begin)
- * r1 = 0x08608000 (end of copying area, 1MB)
- * The kernel is compressed, so 1 MB should be enough.
- * copy the kernel to the beginning of physical memory
- * We start from the highest address, so we can copy
- * from 0x08500000 to 0x08508000 if we have only 8MB
- */
-
-/* As we get more 2.6-kernels it gets more and more
- * uncomfortable to be bound to kernel images of 1MB only.
- * So we add a loop here, to be able to copy some more.
- * Alexander Schulz 2005-07-17
- */
-
- mov r4, #3 @ How many megabytes to copy
-
-
-__MoveCode: sub r4, r4, #1
-
-__Copy: ldr r2, [r0], #-4
- str r2, [r1], #-4
- teq r1, r3
- bne __Copy
-
- /* The firmware maps us in blocks of 1 MB, the next block is
- _below_ the last one. So our decrementing source pointer
- ist right here, but the destination pointer must be increased
- by 2 MB */
- add r1, r1, #0x00200000
- add r3, r3, #0x00100000
-
- teq r4, #0
- bne __MoveCode
-
-
- /* and jump to it */
- adr r2, __go_on @ where we want to jump
- adr r0, __ofw_data @ read the 1. entry of the memory map
- ldr r0, [r0, #4]
- sub r2, r2, r0 @ we are mapped add 0e50 now, sub that (-0e00)
- sub r2, r2, #0x00500000 @ -0050
- ldr r0, __copy_target @ and add 0850 8000 instead
- add r0, r0, #4
- add r2, r2, r0
- mov pc, r2 @ and jump there
-
-__go_on:
- adr sp, __temp_stack
- add sp, sp, #128
- adr r0, __ofw_data
- mov lr, pc
- b create_params
-
- mov r8, #0
- mov r7, #15
+++ /dev/null
-/*
- * linux/arch/arm/boot/compressed/ofw-shark.c
- *
- * by Alexander Schulz
- *
- * This file is used to get some basic information
- * about the memory layout of the shark we are running
- * on. Memory is usually divided in blocks a 8 MB.
- * And bootargs are copied from OpenFirmware.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-
-asmlinkage void
-create_params (unsigned long *buffer)
-{
- /* Is there a better address? Also change in mach-shark/core.c */
- struct tag *tag = (struct tag *) 0x08003000;
- int j,i,m,k,nr_banks,size;
- unsigned char *c;
-
- k = 0;
-
- /* Head of the taglist */
- tag->hdr.tag = ATAG_CORE;
- tag->hdr.size = tag_size(tag_core);
- tag->u.core.flags = 1;
- tag->u.core.pagesize = PAGE_SIZE;
- tag->u.core.rootdev = 0;
-
- /* Build up one tagged block for each memory region */
- size=0;
- nr_banks=(unsigned int) buffer[0];
- for (j=0;j<nr_banks;j++){
- /* search the lowest address and put it into the next entry */
- /* not a fast sort algorithm, but there are at most 8 entries */
- /* and this is used only once anyway */
- m=0xffffffff;
- for (i=0;i<(unsigned int) buffer[0];i++){
- if (buffer[2*i+1]<m) {
- m=buffer[2*i+1];
- k=i;
- }
- }
-
- tag = tag_next(tag);
- tag->hdr.tag = ATAG_MEM;
- tag->hdr.size = tag_size(tag_mem32);
- tag->u.mem.size = buffer[2*k+2];
- tag->u.mem.start = buffer[2*k+1];
-
- size += buffer[2*k+2];
-
- buffer[2*k+1]=0xffffffff; /* mark as copied */
- }
-
- /* The command line */
- tag = tag_next(tag);
- tag->hdr.tag = ATAG_CMDLINE;
-
- c=(unsigned char *)(&buffer[34]);
- j=0;
- while (*c) tag->u.cmdline.cmdline[j++]=*c++;
-
- tag->u.cmdline.cmdline[j]=0;
- tag->hdr.size = (j + 7 + sizeof(struct tag_header)) >> 2;
-
- /* Hardware revision */
- tag = tag_next(tag);
- tag->hdr.tag = ATAG_REVISION;
- tag->hdr.size = tag_size(tag_revision);
- tag->u.revision.rev = ((unsigned char) buffer[33])-'0';
-
- /* End of the taglist */
- tag = tag_next(tag);
- tag->hdr.tag = 0;
- tag->hdr.size = 0;
-}
-
-
-typedef int (*ofw_handle_t)(void *);
-
-/* Everything below is called with a wrong MMU setting.
- * This means: no string constants, no initialization of
- * arrays, no global variables! This is ugly but I didn't
- * want to write this in assembler :-)
- */
-
-int
-of_decode_int(const unsigned char *p)
-{
- unsigned int i = *p++ << 8;
- i = (i + *p++) << 8;
- i = (i + *p++) << 8;
- return (i + *p);
-}
-
-int
-OF_finddevice(ofw_handle_t openfirmware, char *name)
-{
- unsigned int args[8];
- char service[12];
-
- service[0]='f';
- service[1]='i';
- service[2]='n';
- service[3]='d';
- service[4]='d';
- service[5]='e';
- service[6]='v';
- service[7]='i';
- service[8]='c';
- service[9]='e';
- service[10]='\0';
-
- args[0]=(unsigned int)service;
- args[1]=1;
- args[2]=1;
- args[3]=(unsigned int)name;
-
- if (openfirmware(args) == -1)
- return -1;
- return args[4];
-}
-
-int
-OF_getproplen(ofw_handle_t openfirmware, int handle, char *prop)
-{
- unsigned int args[8];
- char service[12];
-
- service[0]='g';
- service[1]='e';
- service[2]='t';
- service[3]='p';
- service[4]='r';
- service[5]='o';
- service[6]='p';
- service[7]='l';
- service[8]='e';
- service[9]='n';
- service[10]='\0';
-
- args[0] = (unsigned int)service;
- args[1] = 2;
- args[2] = 1;
- args[3] = (unsigned int)handle;
- args[4] = (unsigned int)prop;
-
- if (openfirmware(args) == -1)
- return -1;
- return args[5];
-}
-
-int
-OF_getprop(ofw_handle_t openfirmware, int handle, char *prop, void *buf, unsigned int buflen)
-{
- unsigned int args[8];
- char service[8];
-
- service[0]='g';
- service[1]='e';
- service[2]='t';
- service[3]='p';
- service[4]='r';
- service[5]='o';
- service[6]='p';
- service[7]='\0';
-
- args[0] = (unsigned int)service;
- args[1] = 4;
- args[2] = 1;
- args[3] = (unsigned int)handle;
- args[4] = (unsigned int)prop;
- args[5] = (unsigned int)buf;
- args[6] = buflen;
-
- if (openfirmware(args) == -1)
- return -1;
- return args[7];
-}
-
-asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer)
-{
- int phandle,i,mem_len,buffer[32];
- char temp[15];
-
- temp[0]='/';
- temp[1]='m';
- temp[2]='e';
- temp[3]='m';
- temp[4]='o';
- temp[5]='r';
- temp[6]='y';
- temp[7]='\0';
-
- phandle=OF_finddevice(o,temp);
-
- temp[0]='r';
- temp[1]='e';
- temp[2]='g';
- temp[3]='\0';
-
- mem_len = OF_getproplen(o,phandle, temp);
- OF_getprop(o,phandle, temp, buffer, mem_len);
- *nomr=mem_len >> 3;
-
- for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]);
-
- temp[0]='/';
- temp[1]='c';
- temp[2]='h';
- temp[3]='o';
- temp[4]='s';
- temp[5]='e';
- temp[6]='n';
- temp[7]='\0';
-
- phandle=OF_finddevice(o,temp);
-
- temp[0]='b';
- temp[1]='o';
- temp[2]='o';
- temp[3]='t';
- temp[4]='a';
- temp[5]='r';
- temp[6]='g';
- temp[7]='s';
- temp[8]='\0';
-
- mem_len = OF_getproplen(o,phandle, temp);
- OF_getprop(o,phandle, temp, buffer, mem_len);
- if (mem_len > 128) mem_len=128;
- for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i];
- pointer[i+33]=0;
-
- temp[0]='/';
- temp[1]='\0';
- phandle=OF_finddevice(o,temp);
- temp[0]='b';
- temp[1]='a';
- temp[2]='n';
- temp[3]='n';
- temp[4]='e';
- temp[5]='r';
- temp[6]='-';
- temp[7]='n';
- temp[8]='a';
- temp[9]='m';
- temp[10]='e';
- temp[11]='\0';
- mem_len = OF_getproplen(o,phandle, temp);
- OF_getprop(o,phandle, temp, buffer, mem_len);
- * ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2];
-}
obj-$(CONFIG_ICST) += icst.o
obj-$(CONFIG_SA1111) += sa1111.o
-obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
obj-$(CONFIG_DMABOUNCE) += dmabounce.o
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
+++ /dev/null
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-
-#include <asm/mach/pci.h>
-
-#define MAX_SLOTS 7
-
-#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-static int
-via82c505_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- outl(CONFIG_CMD(bus,devfn,where),0xCF8);
- switch (size) {
- case 1:
- *value=inb(0xCFC + (where&3));
- break;
- case 2:
- *value=inw(0xCFC + (where&2));
- break;
- case 4:
- *value=inl(0xCFC);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- outl(CONFIG_CMD(bus,devfn,where),0xCF8);
- switch (size) {
- case 1:
- outb(value, 0xCFC + (where&3));
- break;
- case 2:
- outw(value, 0xCFC + (where&2));
- break;
- case 4:
- outl(value, 0xCFC);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops via82c505_ops = {
- .read = via82c505_read_config,
- .write = via82c505_write_config,
-};
-
-void __init via82c505_preinit(void)
-{
- printk(KERN_DEBUG "PCI: VIA 82c505\n");
- if (!request_region(0xA8,2,"via config")) {
- printk(KERN_WARNING"VIA 82c505: Unable to request region 0xA8\n");
- return;
- }
- if (!request_region(0xCF8,8,"pci config")) {
- printk(KERN_WARNING"VIA 82c505: Unable to request region 0xCF8\n");
- release_region(0xA8, 2);
- return;
- }
-
- /* Enable compatible Mode */
- outb(0x96,0xA8);
- outb(0x18,0xA9);
- outb(0x93,0xA8);
- outb(0xd0,0xA9);
-
-}
-
-int __init via82c505_setup(int nr, struct pci_sys_data *sys)
-{
- return (nr == 0);
-}
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_SHARK=y
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_CS89x0=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_PRINTER=m
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_CYBER2000=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_SB=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
extern void dc21285_preinit(void);
extern void dc21285_postinit(void);
-extern struct pci_ops via82c505_ops;
-extern int via82c505_setup(int nr, struct pci_sys_data *);
-extern void via82c505_init(void *sysdata);
-
#endif /* __ASM_MACH_PCI_H */
endif
lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_SHARK) += io-shark.o
$(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S
$(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S
+++ /dev/null
-/*
- * linux/arch/arm/lib/io-shark.c
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/arch/arm/lib/io-ebsa.S
- * Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := core.o dma.o irq.o pci.o leds.o
-obj-m :=
-obj-n :=
-obj- :=
+++ /dev/null
- zreladdr-y += 0x08008000
-
+++ /dev/null
-/*
- * linux/arch/arm/mach-shark/arch.c
- *
- * Architecture specific stuff.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#include <linux/cpu.h>
-#include <linux/reboot.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/param.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#define ROMCARD_SIZE 0x08000000
-#define ROMCARD_START 0x10000000
-
-static void shark_restart(enum reboot_mode mode, const char *cmd)
-{
- short temp;
- /* Reset the Machine via pc[3] of the sequoia chipset */
- outw(0x09,0x24);
- temp=inw(0x26);
- temp = temp | (1<<3) | (1<<10);
- outw(0x09,0x24);
- outw(temp,0x26);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .iobase = 0x3f8,
- .irq = 4,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- {
- .iobase = 0x2f8,
- .irq = 3,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0x70,
- .end = 0x73,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = IRQ_ISA_RTC_ALARM,
- .end = IRQ_ISA_RTC_ALARM,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device rtc_device = {
- .name = "rtc_cmos",
- .id = -1,
- .resource = rtc_resources,
- .num_resources = ARRAY_SIZE(rtc_resources),
-};
-
-static int __init shark_init(void)
-{
- int ret;
-
- if (machine_is_shark())
- {
- ret = platform_device_register(&rtc_device);
- if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
- ret = platform_device_register(&serial_device);
- if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
- }
- return 0;
-}
-
-arch_initcall(shark_init);
-
-extern void shark_init_irq(void);
-
-#define IRQ_TIMER 0
-#define HZ_TIME ((1193180 + HZ/2) / HZ)
-
-static irqreturn_t
-shark_timer_interrupt(int irq, void *dev_id)
-{
- timer_tick();
- return IRQ_HANDLED;
-}
-
-static struct irqaction shark_timer_irq = {
- .name = "Shark Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = shark_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-static void __init shark_timer_init(void)
-{
- outb(0x34, 0x43); /* binary, mode 0, LSB/MSB, Ch 0 */
- outb(HZ_TIME & 0xff, 0x40); /* LSB of count */
- outb(HZ_TIME >> 8, 0x40);
-
- setup_irq(IRQ_TIMER, &shark_timer_irq);
-}
-
-static void shark_init_early(void)
-{
- cpu_idle_poll_ctrl(true);
-}
-
-MACHINE_START(SHARK, "Shark")
- /* Maintainer: Alexander Schulz */
- .atag_offset = 0x3000,
- .init_early = shark_init_early,
- .init_irq = shark_init_irq,
- .init_time = shark_timer_init,
- .dma_zone_size = SZ_4M,
- .restart = shark_restart,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-shark/dma.c
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/kernel/dma-ebsa285.c
- * Copyright (C) 1998 Phil Blundell
- */
-
-#include <linux/init.h>
-
-#include <asm/dma.h>
-#include <asm/mach/dma.h>
-
-static int __init shark_dma_init(void)
-{
-#ifdef CONFIG_ISA_DMA
- isa_init_dma();
-#endif
- return 0;
-}
-core_initcall(shark_dma_init);
+++ /dev/null
-/* arch/arm/mach-shark/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart, rp, rv, tmp
- mov \rp, #0x3f8
- orr \rv, \rp, #0xfe000000
- orr \rv, \rv, #0x00e00000
- orr \rp, \rp, #0x40000000
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
- mov \rd, #0
-1001: add \rd, \rd, #1
- teq \rd, #0x10000
- bne 1001b
- .endm
-
+++ /dev/null
-/*
- * arch/arm/mach-shark/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Shark platform
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
- .macro get_irqnr_preamble, base, tmp
- mov \base, #0xfe000000
- orr \base, \base, #0x00e00000
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \irqstat, #0x0C
- strb \irqstat, [\base, #0x20] @outb(0x0C, 0x20) /* Poll command */
- ldrb \irqnr, [\base, #0x20] @irq = inb(0x20) & 7
- and \irqstat, \irqnr, #0x80
- teq \irqstat, #0
- beq 43f
- and \irqnr, \irqnr, #7
- teq \irqnr, #2
- bne 44f
-43: mov \irqstat, #0x0C
- strb \irqstat, [\base, #0xa0] @outb(0x0C, 0xA0) /* Poll command */
- ldrb \irqnr, [\base, #0xa0] @irq = (inb(0xA0) & 7) + 8
- and \irqstat, \irqnr, #0x80
- teq \irqstat, #0
- beq 44f
- and \irqnr, \irqnr, #7
- add \irqnr, \irqnr, #8
-44: teq \irqstat, #0
- .endm
-
+++ /dev/null
-/*
- * arch/arm/mach-shark/include/mach/framebuffer.h
- *
- * by Alexander Schulz
- *
- */
-
-#ifndef __ASM_ARCH_FRAMEBUFFER_H
-#define __ASM_ARCH_FRAMEBUFFER_H
-
-/* defines for the Framebuffer */
-#define FB_START 0x06000000
-#define FB_SIZE 0x01000000
-
-#endif
-
+++ /dev/null
-/*
- * arch/arm/mach-shark/include/mach/hardware.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/hardware.h
- * Copyright (C) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define UNCACHEABLE_ADDR 0xdf010000
-
-#endif
-
+++ /dev/null
-/*
- * arch/arm/mach-shark/include/mach/irqs.h
- *
- * by Alexander Schulz
- */
-
-#define NR_IRQS 16
-
-#define IRQ_ISA_KEYBOARD 1
-#define IRQ_ISA_RTC_ALARM 8
-#define I8042_KBD_IRQ 1
-#define I8042_AUX_IRQ 12
-#define IRQ_HARDDISK 14
+++ /dev/null
-/*
- * arch/arm/mach-shark/include/mach/isa-dma.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_CHANNELS 8
-#define DMA_ISA_CASCADE 4
-
-#endif /* _ASM_ARCH_DMA_H */
-
+++ /dev/null
-/*
- * arch/arm/mach-shark/include/mach/memory.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/memory.h
- * Copyright (c) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x08000000)
-
-/*
- * Cache flushing area
- */
-#define FLUSH_BASE_PHYS 0x80000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-shark/include/mach/timex.h
- *
- * by Alexander Schulz
- */
-
-#define CLOCK_TICK_RATE 1193180
+++ /dev/null
-/*
- * arch/arm/mach-shark/include/mach/uncompress.h
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-footbridge/include/mach/uncompress.h
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
-
-static inline void putc(int c)
-{
- volatile int t;
-
- SERIAL_BASE[0] = c;
- t=0x10000;
- while (t--);
-}
-
-static inline void flush(void)
-{
-}
-
-#ifdef DEBUG
-static void putn(unsigned long z)
-{
- int i;
- char x;
-
- putc('0');
- putc('x');
- for (i=0;i<8;i++) {
- x='0'+((z>>((7-i)*4))&0xf);
- if (x>'9') x=x-'0'+'A'-10;
- putc(x);
- }
-}
-
-static void putr()
-{
- putc('\n');
- putc('\r');
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
+++ /dev/null
-/*
- * linux/arch/arm/mach-shark/irq.c
- *
- * by Alexander Schulz
- *
- * derived from linux/arch/ppc/kernel/i8259.c and:
- * arch/arm/mach-ebsa110/include/mach/irq.h
- * Copyright (C) 1996-1998 Russell King
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- * Let through the cascade-interrupt no. 2 (ff-(1<<2)==fb)
- */
-static unsigned char cached_irq_mask[2] = { 0xfb, 0xff };
-
-/*
- * These have to be protected by the irq controller spinlock
- * before being called.
- */
-static void shark_disable_8259A_irq(struct irq_data *d)
-{
- unsigned int mask;
- if (d->irq<8) {
- mask = 1 << d->irq;
- cached_irq_mask[0] |= mask;
- outb(cached_irq_mask[1],0xA1);
- } else {
- mask = 1 << (d->irq-8);
- cached_irq_mask[1] |= mask;
- outb(cached_irq_mask[0],0x21);
- }
-}
-
-static void shark_enable_8259A_irq(struct irq_data *d)
-{
- unsigned int mask;
- if (d->irq<8) {
- mask = ~(1 << d->irq);
- cached_irq_mask[0] &= mask;
- outb(cached_irq_mask[0],0x21);
- } else {
- mask = ~(1 << (d->irq-8));
- cached_irq_mask[1] &= mask;
- outb(cached_irq_mask[1],0xA1);
- }
-}
-
-static void shark_ack_8259A_irq(struct irq_data *d){}
-
-static irqreturn_t bogus_int(int irq, void *dev_id)
-{
- printk("Got interrupt %i!\n",irq);
- return IRQ_NONE;
-}
-
-static struct irqaction cascade;
-
-static struct irq_chip fb_chip = {
- .name = "XT-PIC",
- .irq_ack = shark_ack_8259A_irq,
- .irq_mask = shark_disable_8259A_irq,
- .irq_unmask = shark_enable_8259A_irq,
-};
-
-void __init shark_init_irq(void)
-{
- int irq;
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- irq_set_chip_and_handler(irq, &fb_chip, handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- /* init master interrupt controller */
- outb(0x11, 0x20); /* Start init sequence, edge triggered (level: 0x19)*/
- outb(0x00, 0x21); /* Vector base */
- outb(0x04, 0x21); /* Cascade (slave) on IRQ2 */
- outb(0x03, 0x21); /* Select 8086 mode , auto eoi*/
- outb(0x0A, 0x20);
- /* init slave interrupt controller */
- outb(0x11, 0xA0); /* Start init sequence, edge triggered */
- outb(0x08, 0xA1); /* Vector base */
- outb(0x02, 0xA1); /* Cascade (slave) on IRQ2 */
- outb(0x03, 0xA1); /* Select 8086 mode, auto eoi */
- outb(0x0A, 0xA0);
- outb(cached_irq_mask[1],0xA1);
- outb(cached_irq_mask[0],0x21);
- //request_region(0x20,0x2,"pic1");
- //request_region(0xA0,0x2,"pic2");
-
- cascade.handler = bogus_int;
- cascade.name = "cascade";
- setup_irq(2,&cascade);
-}
-
+++ /dev/null
-/*
- * DIGITAL Shark LED control routines.
- *
- * Driver for the 3 user LEDs found on the Shark
- * Based on Versatile and RealView machine LED code
- *
- * License terms: GNU General Public License (GPL) version 2
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct shark_led {
- struct led_classdev cdev;
- u8 mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
- const char *name;
- const char *trigger;
-} shark_leds[] = {
- { "shark:amber0", "default-on", }, /* Bit 5 */
- { "shark:green", "heartbeat", }, /* Bit 6 */
- { "shark:amber1", "cpu0" }, /* Bit 7 */
-};
-
-static u16 led_reg_read(void)
-{
- outw(0x09, 0x24);
- return inw(0x26);
-}
-
-static void led_reg_write(u16 value)
-{
- outw(0x09, 0x24);
- outw(value, 0x26);
-}
-
-static void shark_led_set(struct led_classdev *cdev,
- enum led_brightness b)
-{
- struct shark_led *led = container_of(cdev,
- struct shark_led, cdev);
- u16 reg = led_reg_read();
-
- if (b != LED_OFF)
- reg |= led->mask;
- else
- reg &= ~led->mask;
-
- led_reg_write(reg);
-}
-
-static enum led_brightness shark_led_get(struct led_classdev *cdev)
-{
- struct shark_led *led = container_of(cdev,
- struct shark_led, cdev);
- u16 reg = led_reg_read();
-
- return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init shark_leds_init(void)
-{
- int i;
- u16 reg;
-
- if (!machine_is_shark())
- return -ENODEV;
-
- for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
- struct shark_led *led;
-
- led = kzalloc(sizeof(*led), GFP_KERNEL);
- if (!led)
- break;
-
- led->cdev.name = shark_leds[i].name;
- led->cdev.brightness_set = shark_led_set;
- led->cdev.brightness_get = shark_led_get;
- led->cdev.default_trigger = shark_leds[i].trigger;
-
- /* Count in 5 bits offset */
- led->mask = BIT(i + 5);
-
- if (led_classdev_register(NULL, &led->cdev) < 0) {
- kfree(led);
- break;
- }
- }
-
- /* Make LEDs independent of power-state */
- request_region(0x24, 4, "led_reg");
- reg = led_reg_read();
- reg |= 1 << 10;
- led_reg_write(reg);
-
- return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(shark_leds_init);
-#endif
+++ /dev/null
-/*
- * linux/arch/arm/mach-shark/pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <video/vga.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#define IO_START 0x40000000
-
-static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (dev->bus->number == 0)
- if (dev->devfn == 0)
- return 255;
- else
- return 11;
- else
- return 255;
-}
-
-extern void __init via82c505_preinit(void);
-
-static struct hw_pci shark_pci __initdata = {
- .setup = via82c505_setup,
- .map_irq = shark_map_irq,
- .nr_controllers = 1,
- .ops = &via82c505_ops,
- .preinit = via82c505_preinit,
-};
-
-static int __init shark_pci_init(void)
-{
- if (!machine_is_shark())
- return -ENODEV;
-
- pcibios_min_io = 0x6000;
- pcibios_min_mem = 0x50000000;
- vga_base = 0xe8000000;
-
- pci_ioremap_io(0, IO_START);
-
- pci_common_init(&shark_pci);
-
- return 0;
-}
-
-subsys_initcall(shark_pci_init);
OSDN Git Service
