branch.<name>.merge::
Defines, together with branch.<name>.remote, the upstream branch
- for the given branch. It tells 'git fetch'/'git pull' which
+ for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which
branch to merge and can also affect 'git push' (see push.default).
When in branch <name>, it tells 'git fetch' the default
refspec to be marked for merging in FETCH_HEAD. The value is
--------
[verse]
'git rebase' [-i | --interactive] [options] [--onto <newbase>]
- <upstream> [<branch>]
+ [<upstream>] [<branch>]
'git rebase' [-i | --interactive] [options] --onto <newbase>
--root [<branch>]
`git checkout <branch>` before doing anything else. Otherwise
it remains on the current branch.
+If <upstream> is not specified, the upstream configured in
+branch.<name>.remote and branch.<name>.merge options will be used; see
+linkgit:git-config[1] for details. If you are currently not on any
+branch or if the current branch does not have a configured upstream,
+the rebase will abort.
+
All changes made by commits in the current branch but that are not
in <upstream> are saved to a temporary area. This is the same set
of commits that would be shown by `git log <upstream>..HEAD` (or
<upstream>::
Upstream branch to compare against. May be any valid commit,
- not just an existing branch name.
+ not just an existing branch name. Defaults to the configured
+ upstream for the current branch.
<branch>::
Working branch; defaults to HEAD.
esac
esac
}
+
+error_on_missing_default_upstream () {
+ cmd="$1"
+ op_type="$2"
+ op_prep="$3"
+ example="$4"
+ branch_name=$(git symbolic-ref -q HEAD)
+ if test -z "$branch_name"
+ then
+ echo "You are not currently on a branch, so I cannot use any
+'branch.<branchname>.merge' in your configuration file.
+Please specify which branch you want to $op_type $op_prep on the command
+line and try again (e.g. '$example').
+See git-${cmd}(1) for details."
+ else
+ echo "You asked me to $cmd without telling me which branch you
+want to $op_type $op_prep, and 'branch.${branch_name#refs/heads/}.merge' in
+your configuration file does not tell me, either. Please
+specify which branch you want to use on the command line and
+try again (e.g. '$example').
+See git-${cmd}(1) for details.
+
+If you often $op_type $op_prep the same branch, you may want to
+use something like the following in your configuration file:
+ [branch \"${branch_name#refs/heads/}\"]
+ remote = <nickname>
+ merge = <remote-ref>"
+ test rebase = "$op_type" &&
+ echo " rebase = true"
+ echo "
+ [remote \"<nickname>\"]
+ url = <url>
+ fetch = <refspec>
+
+See git-config(1) for details."
+ fi
+ exit 1
+}
echo "You asked to pull from the remote '$1', but did not specify"
echo "a branch. Because this is not the default configured remote"
echo "for your current branch, you must specify a branch on the command line."
- elif [ -z "$curr_branch" ]; then
- echo "You are not currently on a branch, so I cannot use any"
- echo "'branch.<branchname>.merge' in your configuration file."
- echo "Please specify which remote branch you want to use on the command"
- echo "line and try again (e.g. 'git pull <repository> <refspec>')."
- echo "See git-pull(1) for details."
- elif [ -z "$upstream" ]; then
- echo "You asked me to pull without telling me which branch you"
- echo "want to $op_type $op_prep, and 'branch.${curr_branch}.merge' in"
- echo "your configuration file does not tell me, either. Please"
- echo "specify which branch you want to use on the command line and"
- echo "try again (e.g. 'git pull <repository> <refspec>')."
- echo "See git-pull(1) for details."
- echo
- echo "If you often $op_type $op_prep the same branch, you may want to"
- echo "use something like the following in your configuration file:"
- echo
- echo " [branch \"${curr_branch}\"]"
- echo " remote = <nickname>"
- echo " merge = <remote-ref>"
- test rebase = "$op_type" &&
- echo " rebase = true"
- echo
- echo " [remote \"<nickname>\"]"
- echo " url = <url>"
- echo " fetch = <refspec>"
- echo
- echo "See git-config(1) for details."
+ elif [ -z "$curr_branch" -o -z "$upstream" ]; then
+ . git-parse-remote
+ error_on_missing_default_upstream "pull" $op_type $op_prep \
+ "git pull <repository> <refspec>"
else
echo "Your configuration specifies to $op_type $op_prep the ref '${upstream#refs/heads/}'"
echo "from the remote, but no such ref was fetched."
# Copyright (c) 2005 Junio C Hamano.
#
-USAGE='[--interactive | -i] [-v] [--force-rebase | -f] [--no-ff] [--onto <newbase>] (<upstream>|--root) [<branch>] [--quiet | -q]'
+USAGE='[--interactive | -i] [-v] [--force-rebase | -f] [--no-ff] [--onto <newbase>] [<upstream>|--root] [<branch>] [--quiet | -q]'
LONG_USAGE='git-rebase replaces <branch> with a new branch of the
same name. When the --onto option is provided the new branch starts
out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
valuable there.'
fi
-test $# -eq 0 && test -z "$rebase_root" && usage
-
if test -n "$interactive_rebase"
then
type=interactive
if test -z "$rebase_root"
then
- # The upstream head must be given. Make sure it is valid.
- upstream_name="$1"
- shift
+ case "$#" in
+ 0)
+ if ! upstream_name=$(git rev-parse --symbolic-full-name \
+ --verify -q @{upstream} 2>/dev/null)
+ then
+ . git-parse-remote
+ error_on_missing_default_upstream "rebase" "rebase" \
+ "against" "git rebase <upstream branch>"
+ fi
+ ;;
+ *) upstream_name="$1"
+ shift
+ ;;
+ esac
upstream=`git rev-parse --verify "${upstream_name}^0"` ||
die "invalid upstream $upstream_name"
upstream_arg="$upstream_name"
'
rm -f B
-test_expect_success 'dump usage when upstream arg is missing' '
- git checkout -b usage topic &&
- test_must_fail git rebase 2>error1 &&
- grep "[Uu]sage" error1 &&
- test_must_fail git rebase --abort 2>error2 &&
- grep "No rebase in progress" error2 &&
- test_must_fail git rebase --onto master 2>error3 &&
- grep "[Uu]sage" error3 &&
- ! grep "can.t shift" error3
+test_expect_success 'fail when upstream arg is missing and not on branch' '
+ git checkout topic &&
+ test_must_fail git rebase >output.out &&
+ grep "You are not currently on a branch" output.out
+'
+
+test_expect_success 'fail when upstream arg is missing and not configured' '
+ git checkout -b no-config topic &&
+ test_must_fail git rebase >output.out &&
+ grep "branch.no-config.merge" output.out
+'
+
+test_expect_success 'default to @{upstream} when upstream arg is missing' '
+ git checkout -b default topic &&
+ git config branch.default.remote .
+ git config branch.default.merge refs/heads/master
+ git rebase &&
+ test "$(git rev-parse default~1)" = "$(git rev-parse master)"
'
test_expect_success 'rebase -q is quiet' '
OSDN Git Service
