OSDN Git Service

Move wifi.c out of libhardware_legacy
authorChristopher Wiley <wiley@google.com>
Wed, 15 Jun 2016 17:43:48 +0000 (10:43 -0700)
committerChristopher Wiley <wiley@google.com>
Wed, 15 Jun 2016 17:45:42 +0000 (10:45 -0700)
Most of this code is device independent, and we're parameterizing the
parts that are not in a way which makes the logic device independent.

Bug: 29321445
Change-Id: Ice9f16d966275378d4fc5a5201eca82f2ea67c5e
Test: Compiles, can associate to an AP.

Android.mk
include/hardware_legacy/wifi.h [deleted file]
wifi/Android.mk [deleted file]
wifi/wifi.c [deleted file]

index c998590..18c49e2 100644 (file)
@@ -1,7 +1,7 @@
 # Copyright 2006 The Android Open Source Project
 
 # Setting LOCAL_PATH will mess up all-subdir-makefiles, so do it beforehand.
-legacy_modules := power uevent wifi qemu qemu_tracing
+legacy_modules := power uevent qemu qemu_tracing
 
 SAVE_MAKEFILES := $(call all-named-subdir-makefiles,$(legacy_modules))
 LEGACY_AUDIO_MAKEFILES := $(call all-named-subdir-makefiles,audio)
diff --git a/include/hardware_legacy/wifi.h b/include/hardware_legacy/wifi.h
deleted file mode 100644 (file)
index dce9d34..0000000
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef _WIFI_H
-#define _WIFI_H
-
-#if __cplusplus
-extern "C" {
-#endif
-
-/**
- * Load the Wi-Fi driver.
- *
- * @return 0 on success, < 0 on failure.
- */
-int wifi_load_driver();
-
-/**
- * Unload the Wi-Fi driver.
- *
- * @return 0 on success, < 0 on failure.
- */
-int wifi_unload_driver();
-
-/**
- * Check if the Wi-Fi driver is loaded.
- * Check if the Wi-Fi driver is loaded.
-
- * @return 0 on success, < 0 on failure.
- */
-int is_wifi_driver_loaded();
-
-
-/**
- * Start supplicant.
- *
- * @return 0 on success, < 0 on failure.
- */
-int wifi_start_supplicant(int p2pSupported);
-
-/**
- * Stop supplicant.
- *
- * @return 0 on success, < 0 on failure.
- */
-int wifi_stop_supplicant(int p2pSupported);
-
-/**
- * Open a connection to supplicant
- *
- * @return 0 on success, < 0 on failure.
- */
-int wifi_connect_to_supplicant();
-
-/**
- * Close connection to supplicant
- *
- * @return 0 on success, < 0 on failure.
- */
-void wifi_close_supplicant_connection();
-
-/**
- * wifi_wait_for_event() performs a blocking call to 
- * get a Wi-Fi event and returns a string representing 
- * a Wi-Fi event when it occurs.
- *
- * @param buf is the buffer that receives the event
- * @param len is the maximum length of the buffer
- *
- * @returns number of bytes in buffer, 0 if no
- * event (for instance, no connection), and less than 0
- * if there is an error.
- */
-int wifi_wait_for_event(char *buf, size_t len);
-
-/**
- * wifi_command() issues a command to the Wi-Fi driver.
- *
- * Android extends the standard commands listed at
- * /link http://hostap.epitest.fi/wpa_supplicant/devel/ctrl_iface_page.html
- * to include support for sending commands to the driver:
- *
- * See wifi/java/android/net/wifi/WifiNative.java for the details of
- * driver commands that are supported
- *
- * @param command is the string command (preallocated with 32 bytes)
- * @param commandlen is command buffer length
- * @param reply is a buffer to receive a reply string
- * @param reply_len on entry, this is the maximum length of
- *        the reply buffer. On exit, the number of
- *        bytes in the reply buffer.
- *
- * @return 0 if successful, < 0 if an error.
- */
-int wifi_command(const char *command, char *reply, size_t *reply_len);
-
-/**
- * Return the path to requested firmware
- */
-#define WIFI_GET_FW_PATH_STA   0
-#define WIFI_GET_FW_PATH_AP    1
-#define WIFI_GET_FW_PATH_P2P   2
-const char *wifi_get_fw_path(int fw_type);
-
-/**
- * Change the path to firmware for the wlan driver
- */
-int wifi_change_fw_path(const char *fwpath);
-
-/**
- * Check and create if necessary initial entropy file
- */
-#define WIFI_ENTROPY_FILE      "/data/misc/wifi/entropy.bin"
-int ensure_entropy_file_exists();
-
-#if __cplusplus
-};  // extern "C"
-#endif
-
-#endif  // _WIFI_H
diff --git a/wifi/Android.mk b/wifi/Android.mk
deleted file mode 100644 (file)
index ed59b40..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
-# Copyright 2006 The Android Open Source Project
-
-ifdef WIFI_DRIVER_MODULE_PATH
-LOCAL_CFLAGS += -DWIFI_DRIVER_MODULE_PATH=\"$(WIFI_DRIVER_MODULE_PATH)\"
-endif
-ifdef WIFI_DRIVER_MODULE_ARG
-LOCAL_CFLAGS += -DWIFI_DRIVER_MODULE_ARG=\"$(WIFI_DRIVER_MODULE_ARG)\"
-endif
-ifdef WIFI_DRIVER_MODULE_NAME
-LOCAL_CFLAGS += -DWIFI_DRIVER_MODULE_NAME=\"$(WIFI_DRIVER_MODULE_NAME)\"
-endif
-ifdef WIFI_FIRMWARE_LOADER
-LOCAL_CFLAGS += -DWIFI_FIRMWARE_LOADER=\"$(WIFI_FIRMWARE_LOADER)\"
-endif
-ifdef WIFI_DRIVER_FW_PATH_STA
-LOCAL_CFLAGS += -DWIFI_DRIVER_FW_PATH_STA=\"$(WIFI_DRIVER_FW_PATH_STA)\"
-endif
-ifdef WIFI_DRIVER_FW_PATH_AP
-LOCAL_CFLAGS += -DWIFI_DRIVER_FW_PATH_AP=\"$(WIFI_DRIVER_FW_PATH_AP)\"
-endif
-ifdef WIFI_DRIVER_FW_PATH_P2P
-LOCAL_CFLAGS += -DWIFI_DRIVER_FW_PATH_P2P=\"$(WIFI_DRIVER_FW_PATH_P2P)\"
-endif
-ifdef WIFI_DRIVER_FW_PATH_PARAM
-LOCAL_CFLAGS += -DWIFI_DRIVER_FW_PATH_PARAM=\"$(WIFI_DRIVER_FW_PATH_PARAM)\"
-endif
-
-ifdef WIFI_DRIVER_STATE_CTRL_PARAM
-LOCAL_CFLAGS += -DWIFI_DRIVER_STATE_CTRL_PARAM=\"$(WIFI_DRIVER_STATE_CTRL_PARAM)\"
-endif
-ifdef WIFI_DRIVER_STATE_ON
-LOCAL_CFLAGS += -DWIFI_DRIVER_STATE_ON=\"$(WIFI_DRIVER_STATE_ON)\"
-endif
-ifdef WIFI_DRIVER_STATE_OFF
-LOCAL_CFLAGS += -DWIFI_DRIVER_STATE_OFF=\"$(WIFI_DRIVER_STATE_OFF)\"
-endif
-
-LOCAL_SRC_FILES += wifi/wifi.c
-
-ifdef WPA_SUPPLICANT_VERSION
-LOCAL_CFLAGS += -DLIBWPA_CLIENT_EXISTS
-LOCAL_SHARED_LIBRARIES += libwpa_client
-endif
-LOCAL_SHARED_LIBRARIES += libnetutils
diff --git a/wifi/wifi.c b/wifi/wifi.c
deleted file mode 100644 (file)
index 2098ab1..0000000
+++ /dev/null
@@ -1,776 +0,0 @@
-/*
- * Copyright 2008, The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <stdlib.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <string.h>
-#include <dirent.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <poll.h>
-
-#include "hardware_legacy/wifi.h"
-#ifdef LIBWPA_CLIENT_EXISTS
-#include "libwpa_client/wpa_ctrl.h"
-#endif
-
-#define LOG_TAG "WifiHW"
-#include "cutils/log.h"
-#include "cutils/memory.h"
-#include "cutils/misc.h"
-#include "cutils/properties.h"
-#include "private/android_filesystem_config.h"
-
-#define _REALLY_INCLUDE_SYS__SYSTEM_PROPERTIES_H_
-#include <sys/_system_properties.h>
-
-extern int init_module(void *, unsigned long, const char *);
-extern int delete_module(const char *, unsigned int);
-void wifi_close_sockets();
-
-#ifndef LIBWPA_CLIENT_EXISTS
-#define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
-struct wpa_ctrl {};
-void wpa_ctrl_cleanup(void) {}
-struct wpa_ctrl *wpa_ctrl_open(const char *ctrl_path) { return NULL; }
-void wpa_ctrl_close(struct wpa_ctrl *ctrl) {}
-int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
-       char *reply, size_t *reply_len, void (*msg_cb)(char *msg, size_t len))
-       { return 0; }
-int wpa_ctrl_attach(struct wpa_ctrl *ctrl) { return 0; }
-int wpa_ctrl_detach(struct wpa_ctrl *ctrl) { return 0; }
-int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len)
-       { return 0; }
-int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl) { return 0; }
-#endif
-
-static struct wpa_ctrl *ctrl_conn;
-static struct wpa_ctrl *monitor_conn;
-
-/* socket pair used to exit from a blocking read */
-static int exit_sockets[2];
-
-static char primary_iface[PROPERTY_VALUE_MAX];
-// TODO: use new ANDROID_SOCKET mechanism, once support for multiple
-// sockets is in
-
-#ifndef WIFI_DRIVER_MODULE_ARG
-#define WIFI_DRIVER_MODULE_ARG          ""
-#endif
-#define WIFI_TEST_INTERFACE            "sta"
-
-#ifndef WIFI_DRIVER_FW_PATH_STA
-#define WIFI_DRIVER_FW_PATH_STA                NULL
-#endif
-#ifndef WIFI_DRIVER_FW_PATH_AP
-#define WIFI_DRIVER_FW_PATH_AP         NULL
-#endif
-#ifndef WIFI_DRIVER_FW_PATH_P2P
-#define WIFI_DRIVER_FW_PATH_P2P                NULL
-#endif
-
-#ifndef WIFI_DRIVER_FW_PATH_PARAM
-#define WIFI_DRIVER_FW_PATH_PARAM      "/sys/module/wlan/parameters/fwpath"
-#endif
-
-#define WIFI_DRIVER_LOADER_DELAY       1000000
-
-static const char IFACE_DIR[]           = "/data/system/wpa_supplicant";
-#ifdef WIFI_DRIVER_MODULE_PATH
-static const char DRIVER_MODULE_NAME[]  = WIFI_DRIVER_MODULE_NAME;
-static const char DRIVER_MODULE_TAG[]   = WIFI_DRIVER_MODULE_NAME " ";
-static const char DRIVER_MODULE_PATH[]  = WIFI_DRIVER_MODULE_PATH;
-static const char DRIVER_MODULE_ARG[]   = WIFI_DRIVER_MODULE_ARG;
-#endif
-static const char DRIVER_PROP_NAME[]    = "wlan.driver.status";
-static const char SUPPLICANT_NAME[]     = "wpa_supplicant";
-static const char SUPP_PROP_NAME[]      = "init.svc.wpa_supplicant";
-static const char P2P_SUPPLICANT_NAME[] = "p2p_supplicant";
-static const char P2P_PROP_NAME[]       = "init.svc.p2p_supplicant";
-static const char SUPP_CONFIG_TEMPLATE[]= "/system/etc/wifi/wpa_supplicant.conf";
-static const char SUPP_CONFIG_FILE[]    = "/data/misc/wifi/wpa_supplicant.conf";
-static const char P2P_CONFIG_FILE[]     = "/data/misc/wifi/p2p_supplicant.conf";
-static const char CONTROL_IFACE_PATH[]  = "/data/misc/wifi/sockets";
-static const char MODULE_FILE[]         = "/proc/modules";
-
-static const char IFNAME[]              = "IFNAME=";
-#define IFNAMELEN                      (sizeof(IFNAME) - 1)
-static const char WPA_EVENT_IGNORE[]    = "CTRL-EVENT-IGNORE ";
-
-static const char SUPP_ENTROPY_FILE[]   = WIFI_ENTROPY_FILE;
-static unsigned char dummy_key[21] = { 0x02, 0x11, 0xbe, 0x33, 0x43, 0x35,
-                                       0x68, 0x47, 0x84, 0x99, 0xa9, 0x2b,
-                                       0x1c, 0xd3, 0xee, 0xff, 0xf1, 0xe2,
-                                       0xf3, 0xf4, 0xf5 };
-
-/* Is either SUPPLICANT_NAME or P2P_SUPPLICANT_NAME */
-static char supplicant_name[PROPERTY_VALUE_MAX];
-/* Is either SUPP_PROP_NAME or P2P_PROP_NAME */
-static char supplicant_prop_name[PROPERTY_KEY_MAX];
-
-static int insmod(const char *filename, const char *args)
-{
-    void *module;
-    unsigned int size;
-    int ret;
-
-    module = load_file(filename, &size);
-    if (!module)
-        return -1;
-
-    ret = init_module(module, size, args);
-
-    free(module);
-
-    return ret;
-}
-
-static int rmmod(const char *modname)
-{
-    int ret = -1;
-    int maxtry = 10;
-
-    while (maxtry-- > 0) {
-        ret = delete_module(modname, O_NONBLOCK | O_EXCL);
-        if (ret < 0 && errno == EAGAIN)
-            usleep(500000);
-        else
-            break;
-    }
-
-    if (ret != 0)
-        ALOGD("Unable to unload driver module \"%s\": %s\n",
-             modname, strerror(errno));
-    return ret;
-}
-
-#ifdef WIFI_DRIVER_STATE_CTRL_PARAM
-int wifi_change_driver_state(const char *state)
-{
-    int len;
-    int fd;
-    int ret = 0;
-
-    if (!state)
-        return -1;
-    fd = TEMP_FAILURE_RETRY(open(WIFI_DRIVER_STATE_CTRL_PARAM, O_WRONLY));
-    if (fd < 0) {
-        ALOGE("Failed to open driver state control param (%s)", strerror(errno));
-        return -1;
-    }
-    len = strlen(state) + 1;
-    if (TEMP_FAILURE_RETRY(write(fd, state, len)) != len) {
-        ALOGE("Failed to write driver state control param (%s)", strerror(errno));
-        ret = -1;
-    }
-    close(fd);
-    return ret;
-}
-#endif
-
-int is_wifi_driver_loaded() {
-    char driver_status[PROPERTY_VALUE_MAX];
-#ifdef WIFI_DRIVER_MODULE_PATH
-    FILE *proc;
-    char line[sizeof(DRIVER_MODULE_TAG)+10];
-#endif
-
-    if (!property_get(DRIVER_PROP_NAME, driver_status, NULL)
-            || strcmp(driver_status, "ok") != 0) {
-        return 0;  /* driver not loaded */
-    }
-#ifdef WIFI_DRIVER_MODULE_PATH
-    /*
-     * If the property says the driver is loaded, check to
-     * make sure that the property setting isn't just left
-     * over from a previous manual shutdown or a runtime
-     * crash.
-     */
-    if ((proc = fopen(MODULE_FILE, "r")) == NULL) {
-        ALOGW("Could not open %s: %s", MODULE_FILE, strerror(errno));
-        property_set(DRIVER_PROP_NAME, "unloaded");
-        return 0;
-    }
-    while ((fgets(line, sizeof(line), proc)) != NULL) {
-        if (strncmp(line, DRIVER_MODULE_TAG, strlen(DRIVER_MODULE_TAG)) == 0) {
-            fclose(proc);
-            return 1;
-        }
-    }
-    fclose(proc);
-    property_set(DRIVER_PROP_NAME, "unloaded");
-    return 0;
-#else
-    return 1;
-#endif
-}
-
-int wifi_load_driver()
-{
-#ifdef WIFI_DRIVER_MODULE_PATH
-    if (is_wifi_driver_loaded()) {
-        return 0;
-    }
-
-    if (insmod(DRIVER_MODULE_PATH, DRIVER_MODULE_ARG) < 0)
-        return -1;
-
-#elif defined WIFI_DRIVER_STATE_CTRL_PARAM
-    if (is_wifi_driver_loaded()) {
-        return 0;
-    }
-
-    if (wifi_change_driver_state(WIFI_DRIVER_STATE_ON) < 0)
-        return -1;
-#endif
-    property_set(DRIVER_PROP_NAME, "ok");
-    return 0;
-}
-
-int wifi_unload_driver()
-{
-    usleep(200000); /* allow to finish interface down */
-#ifdef WIFI_DRIVER_MODULE_PATH
-    if (rmmod(DRIVER_MODULE_NAME) == 0) {
-        int count = 20; /* wait at most 10 seconds for completion */
-        while (count-- > 0) {
-            if (!is_wifi_driver_loaded())
-                break;
-            usleep(500000);
-        }
-        usleep(500000); /* allow card removal */
-        if (count) {
-            return 0;
-        }
-        return -1;
-    } else
-        return -1;
-#else
-#ifdef WIFI_DRIVER_STATE_CTRL_PARAM
-    if (is_wifi_driver_loaded()) {
-        if (wifi_change_driver_state(WIFI_DRIVER_STATE_OFF) < 0)
-            return -1;
-    }
-#endif
-    property_set(DRIVER_PROP_NAME, "unloaded");
-    return 0;
-#endif
-}
-
-int ensure_entropy_file_exists()
-{
-    int ret;
-    int destfd;
-
-    ret = access(SUPP_ENTROPY_FILE, R_OK|W_OK);
-    if ((ret == 0) || (errno == EACCES)) {
-        if ((ret != 0) &&
-            (chmod(SUPP_ENTROPY_FILE, S_IRUSR|S_IWUSR|S_IRGRP|S_IWGRP) != 0)) {
-            ALOGE("Cannot set RW to \"%s\": %s", SUPP_ENTROPY_FILE, strerror(errno));
-            return -1;
-        }
-        return 0;
-    }
-    destfd = TEMP_FAILURE_RETRY(open(SUPP_ENTROPY_FILE, O_CREAT|O_RDWR, 0660));
-    if (destfd < 0) {
-        ALOGE("Cannot create \"%s\": %s", SUPP_ENTROPY_FILE, strerror(errno));
-        return -1;
-    }
-
-    if (TEMP_FAILURE_RETRY(write(destfd, dummy_key, sizeof(dummy_key))) != sizeof(dummy_key)) {
-        ALOGE("Error writing \"%s\": %s", SUPP_ENTROPY_FILE, strerror(errno));
-        close(destfd);
-        return -1;
-    }
-    close(destfd);
-
-    /* chmod is needed because open() didn't set permisions properly */
-    if (chmod(SUPP_ENTROPY_FILE, 0660) < 0) {
-        ALOGE("Error changing permissions of %s to 0660: %s",
-             SUPP_ENTROPY_FILE, strerror(errno));
-        unlink(SUPP_ENTROPY_FILE);
-        return -1;
-    }
-
-    if (chown(SUPP_ENTROPY_FILE, AID_SYSTEM, AID_WIFI) < 0) {
-        ALOGE("Error changing group ownership of %s to %d: %s",
-             SUPP_ENTROPY_FILE, AID_WIFI, strerror(errno));
-        unlink(SUPP_ENTROPY_FILE);
-        return -1;
-    }
-    return 0;
-}
-
-int ensure_config_file_exists(const char *config_file)
-{
-    char buf[2048];
-    int srcfd, destfd;
-    struct stat sb;
-    int nread;
-    int ret;
-
-    ret = access(config_file, R_OK|W_OK);
-    if ((ret == 0) || (errno == EACCES)) {
-        if ((ret != 0) &&
-            (chmod(config_file, S_IRUSR|S_IWUSR|S_IRGRP|S_IWGRP) != 0)) {
-            ALOGE("Cannot set RW to \"%s\": %s", config_file, strerror(errno));
-            return -1;
-        }
-        return 0;
-    } else if (errno != ENOENT) {
-        ALOGE("Cannot access \"%s\": %s", config_file, strerror(errno));
-        return -1;
-    }
-
-    srcfd = TEMP_FAILURE_RETRY(open(SUPP_CONFIG_TEMPLATE, O_RDONLY));
-    if (srcfd < 0) {
-        ALOGE("Cannot open \"%s\": %s", SUPP_CONFIG_TEMPLATE, strerror(errno));
-        return -1;
-    }
-
-    destfd = TEMP_FAILURE_RETRY(open(config_file, O_CREAT|O_RDWR, 0660));
-    if (destfd < 0) {
-        close(srcfd);
-        ALOGE("Cannot create \"%s\": %s", config_file, strerror(errno));
-        return -1;
-    }
-
-    while ((nread = TEMP_FAILURE_RETRY(read(srcfd, buf, sizeof(buf)))) != 0) {
-        if (nread < 0) {
-            ALOGE("Error reading \"%s\": %s", SUPP_CONFIG_TEMPLATE, strerror(errno));
-            close(srcfd);
-            close(destfd);
-            unlink(config_file);
-            return -1;
-        }
-        TEMP_FAILURE_RETRY(write(destfd, buf, nread));
-    }
-
-    close(destfd);
-    close(srcfd);
-
-    /* chmod is needed because open() didn't set permisions properly */
-    if (chmod(config_file, 0660) < 0) {
-        ALOGE("Error changing permissions of %s to 0660: %s",
-             config_file, strerror(errno));
-        unlink(config_file);
-        return -1;
-    }
-
-    if (chown(config_file, AID_SYSTEM, AID_WIFI) < 0) {
-        ALOGE("Error changing group ownership of %s to %d: %s",
-             config_file, AID_WIFI, strerror(errno));
-        unlink(config_file);
-        return -1;
-    }
-    return 0;
-}
-
-int wifi_start_supplicant(int p2p_supported)
-{
-    char supp_status[PROPERTY_VALUE_MAX] = {'\0'};
-    int count = 200; /* wait at most 20 seconds for completion */
-    const prop_info *pi;
-    unsigned serial = 0, i;
-
-    if (p2p_supported) {
-        strcpy(supplicant_name, P2P_SUPPLICANT_NAME);
-        strcpy(supplicant_prop_name, P2P_PROP_NAME);
-
-        /* Ensure p2p config file is created */
-        if (ensure_config_file_exists(P2P_CONFIG_FILE) < 0) {
-            ALOGE("Failed to create a p2p config file");
-            return -1;
-        }
-
-    } else {
-        strcpy(supplicant_name, SUPPLICANT_NAME);
-        strcpy(supplicant_prop_name, SUPP_PROP_NAME);
-    }
-
-    /* Check whether already running */
-    if (property_get(supplicant_prop_name, supp_status, NULL)
-            && strcmp(supp_status, "running") == 0) {
-        return 0;
-    }
-
-    /* Before starting the daemon, make sure its config file exists */
-    if (ensure_config_file_exists(SUPP_CONFIG_FILE) < 0) {
-        ALOGE("Wi-Fi will not be enabled");
-        return -1;
-    }
-
-    if (ensure_entropy_file_exists() < 0) {
-        ALOGE("Wi-Fi entropy file was not created");
-    }
-
-    /* Clear out any stale socket files that might be left over. */
-    wpa_ctrl_cleanup();
-
-    /* Reset sockets used for exiting from hung state */
-    exit_sockets[0] = exit_sockets[1] = -1;
-
-    /*
-     * Get a reference to the status property, so we can distinguish
-     * the case where it goes stopped => running => stopped (i.e.,
-     * it start up, but fails right away) from the case in which
-     * it starts in the stopped state and never manages to start
-     * running at all.
-     */
-    pi = __system_property_find(supplicant_prop_name);
-    if (pi != NULL) {
-        serial = __system_property_serial(pi);
-    }
-    property_get("wifi.interface", primary_iface, WIFI_TEST_INTERFACE);
-
-    property_set("ctl.start", supplicant_name);
-    sched_yield();
-
-    while (count-- > 0) {
-        if (pi == NULL) {
-            pi = __system_property_find(supplicant_prop_name);
-        }
-        if (pi != NULL) {
-            /*
-             * property serial updated means that init process is scheduled
-             * after we sched_yield, further property status checking is based on this */
-            if (__system_property_serial(pi) != serial) {
-                __system_property_read(pi, NULL, supp_status);
-                if (strcmp(supp_status, "running") == 0) {
-                    return 0;
-                } else if (strcmp(supp_status, "stopped") == 0) {
-                    return -1;
-                }
-            }
-        }
-        usleep(100000);
-    }
-    return -1;
-}
-
-int wifi_stop_supplicant(int p2p_supported)
-{
-    char supp_status[PROPERTY_VALUE_MAX] = {'\0'};
-    int count = 50; /* wait at most 5 seconds for completion */
-
-    if (p2p_supported) {
-        strcpy(supplicant_name, P2P_SUPPLICANT_NAME);
-        strcpy(supplicant_prop_name, P2P_PROP_NAME);
-    } else {
-        strcpy(supplicant_name, SUPPLICANT_NAME);
-        strcpy(supplicant_prop_name, SUPP_PROP_NAME);
-    }
-
-    /* Check whether supplicant already stopped */
-    if (property_get(supplicant_prop_name, supp_status, NULL)
-        && strcmp(supp_status, "stopped") == 0) {
-        return 0;
-    }
-
-    property_set("ctl.stop", supplicant_name);
-    sched_yield();
-
-    while (count-- > 0) {
-        if (property_get(supplicant_prop_name, supp_status, NULL)) {
-            if (strcmp(supp_status, "stopped") == 0)
-                return 0;
-        }
-        usleep(100000);
-    }
-    ALOGE("Failed to stop supplicant");
-    return -1;
-}
-
-int wifi_connect_on_socket_path(const char *path)
-{
-    char supp_status[PROPERTY_VALUE_MAX] = {'\0'};
-
-    /* Make sure supplicant is running */
-    if (!property_get(supplicant_prop_name, supp_status, NULL)
-            || strcmp(supp_status, "running") != 0) {
-        ALOGE("Supplicant not running, cannot connect");
-        return -1;
-    }
-
-    ctrl_conn = wpa_ctrl_open(path);
-    if (ctrl_conn == NULL) {
-        ALOGE("Unable to open connection to supplicant on \"%s\": %s",
-             path, strerror(errno));
-        return -1;
-    }
-    monitor_conn = wpa_ctrl_open(path);
-    if (monitor_conn == NULL) {
-        wpa_ctrl_close(ctrl_conn);
-        ctrl_conn = NULL;
-        return -1;
-    }
-    if (wpa_ctrl_attach(monitor_conn) != 0) {
-        wpa_ctrl_close(monitor_conn);
-        wpa_ctrl_close(ctrl_conn);
-        ctrl_conn = monitor_conn = NULL;
-        return -1;
-    }
-
-    if (socketpair(AF_UNIX, SOCK_STREAM, 0, exit_sockets) == -1) {
-        wpa_ctrl_close(monitor_conn);
-        wpa_ctrl_close(ctrl_conn);
-        ctrl_conn = monitor_conn = NULL;
-        return -1;
-    }
-
-    return 0;
-}
-
-/* Establishes the control and monitor socket connections on the interface */
-int wifi_connect_to_supplicant()
-{
-    static char path[PATH_MAX];
-
-    if (access(IFACE_DIR, F_OK) == 0) {
-        snprintf(path, sizeof(path), "%s/%s", IFACE_DIR, primary_iface);
-    } else {
-        snprintf(path, sizeof(path), "@android:wpa_%s", primary_iface);
-    }
-    return wifi_connect_on_socket_path(path);
-}
-
-int wifi_send_command(const char *cmd, char *reply, size_t *reply_len)
-{
-    int ret;
-    if (ctrl_conn == NULL) {
-        ALOGV("Not connected to wpa_supplicant - \"%s\" command dropped.\n", cmd);
-        return -1;
-    }
-    ret = wpa_ctrl_request(ctrl_conn, cmd, strlen(cmd), reply, reply_len, NULL);
-    if (ret == -2) {
-        ALOGD("'%s' command timed out.\n", cmd);
-        /* unblocks the monitor receive socket for termination */
-        TEMP_FAILURE_RETRY(write(exit_sockets[0], "T", 1));
-        return -2;
-    } else if (ret < 0 || strncmp(reply, "FAIL", 4) == 0) {
-        return -1;
-    }
-    if (strncmp(cmd, "PING", 4) == 0) {
-        reply[*reply_len] = '\0';
-    }
-    return 0;
-}
-
-int wifi_supplicant_connection_active()
-{
-    char supp_status[PROPERTY_VALUE_MAX] = {'\0'};
-
-    if (property_get(supplicant_prop_name, supp_status, NULL)) {
-        if (strcmp(supp_status, "stopped") == 0)
-            return -1;
-    }
-
-    return 0;
-}
-
-int wifi_ctrl_recv(char *reply, size_t *reply_len)
-{
-    int res;
-    int ctrlfd = wpa_ctrl_get_fd(monitor_conn);
-    struct pollfd rfds[2];
-
-    memset(rfds, 0, 2 * sizeof(struct pollfd));
-    rfds[0].fd = ctrlfd;
-    rfds[0].events |= POLLIN;
-    rfds[1].fd = exit_sockets[1];
-    rfds[1].events |= POLLIN;
-    do {
-        res = TEMP_FAILURE_RETRY(poll(rfds, 2, 30000));
-        if (res < 0) {
-            ALOGE("Error poll = %d", res);
-            return res;
-        } else if (res == 0) {
-            /* timed out, check if supplicant is active
-             * or not ..
-             */
-            res = wifi_supplicant_connection_active();
-            if (res < 0)
-                return -2;
-        }
-    } while (res == 0);
-
-    if (rfds[0].revents & POLLIN) {
-        return wpa_ctrl_recv(monitor_conn, reply, reply_len);
-    }
-
-    /* it is not rfds[0], then it must be rfts[1] (i.e. the exit socket)
-     * or we timed out. In either case, this call has failed ..
-     */
-    return -2;
-}
-
-int wifi_wait_on_socket(char *buf, size_t buflen)
-{
-    size_t nread = buflen - 1;
-    int result;
-    char *match, *match2;
-
-    if (monitor_conn == NULL) {
-        return snprintf(buf, buflen, "IFNAME=%s %s - connection closed",
-                        primary_iface, WPA_EVENT_TERMINATING);
-    }
-
-    result = wifi_ctrl_recv(buf, &nread);
-
-    /* Terminate reception on exit socket */
-    if (result == -2) {
-        return snprintf(buf, buflen, "IFNAME=%s %s - connection closed",
-                        primary_iface, WPA_EVENT_TERMINATING);
-    }
-
-    if (result < 0) {
-        ALOGD("wifi_ctrl_recv failed: %s\n", strerror(errno));
-        return snprintf(buf, buflen, "IFNAME=%s %s - recv error",
-                        primary_iface, WPA_EVENT_TERMINATING);
-    }
-    buf[nread] = '\0';
-    /* Check for EOF on the socket */
-    if (result == 0 && nread == 0) {
-        /* Fabricate an event to pass up */
-        ALOGD("Received EOF on supplicant socket\n");
-        return snprintf(buf, buflen, "IFNAME=%s %s - signal 0 received",
-                        primary_iface, WPA_EVENT_TERMINATING);
-    }
-    /*
-     * Events strings are in the format
-     *
-     *     IFNAME=iface <N>CTRL-EVENT-XXX 
-     *        or
-     *     <N>CTRL-EVENT-XXX 
-     *
-     * where N is the message level in numerical form (0=VERBOSE, 1=DEBUG,
-     * etc.) and XXX is the event name. The level information is not useful
-     * to us, so strip it off.
-     */
-
-    if (strncmp(buf, IFNAME, IFNAMELEN) == 0) {
-        match = strchr(buf, ' ');
-        if (match != NULL) {
-            if (match[1] == '<') {
-                match2 = strchr(match + 2, '>');
-                if (match2 != NULL) {
-                    nread -= (match2 - match);
-                    memmove(match + 1, match2 + 1, nread - (match - buf) + 1);
-                }
-            }
-        } else {
-            return snprintf(buf, buflen, "%s", WPA_EVENT_IGNORE);
-        }
-    } else if (buf[0] == '<') {
-        match = strchr(buf, '>');
-        if (match != NULL) {
-            nread -= (match + 1 - buf);
-            memmove(buf, match + 1, nread + 1);
-            ALOGV("supplicant generated event without interface - %s\n", buf);
-        }
-    } else {
-        /* let the event go as is! */
-        ALOGW("supplicant generated event without interface and without message level - %s\n", buf);
-    }
-
-    return nread;
-}
-
-int wifi_wait_for_event(char *buf, size_t buflen)
-{
-    return wifi_wait_on_socket(buf, buflen);
-}
-
-void wifi_close_sockets()
-{
-    if (ctrl_conn != NULL) {
-        wpa_ctrl_close(ctrl_conn);
-        ctrl_conn = NULL;
-    }
-
-    if (monitor_conn != NULL) {
-        wpa_ctrl_close(monitor_conn);
-        monitor_conn = NULL;
-    }
-
-    if (exit_sockets[0] >= 0) {
-        close(exit_sockets[0]);
-        exit_sockets[0] = -1;
-    }
-
-    if (exit_sockets[1] >= 0) {
-        close(exit_sockets[1]);
-        exit_sockets[1] = -1;
-    }
-}
-
-void wifi_close_supplicant_connection()
-{
-    char supp_status[PROPERTY_VALUE_MAX] = {'\0'};
-    int count = 50; /* wait at most 5 seconds to ensure init has stopped stupplicant */
-
-    wifi_close_sockets();
-
-    while (count-- > 0) {
-        if (property_get(supplicant_prop_name, supp_status, NULL)) {
-            if (strcmp(supp_status, "stopped") == 0)
-                return;
-        }
-        usleep(100000);
-    }
-}
-
-int wifi_command(const char *command, char *reply, size_t *reply_len)
-{
-    return wifi_send_command(command, reply, reply_len);
-}
-
-const char *wifi_get_fw_path(int fw_type)
-{
-    switch (fw_type) {
-    case WIFI_GET_FW_PATH_STA:
-        return WIFI_DRIVER_FW_PATH_STA;
-    case WIFI_GET_FW_PATH_AP:
-        return WIFI_DRIVER_FW_PATH_AP;
-    case WIFI_GET_FW_PATH_P2P:
-        return WIFI_DRIVER_FW_PATH_P2P;
-    }
-    return NULL;
-}
-
-int wifi_change_fw_path(const char *fwpath)
-{
-    int len;
-    int fd;
-    int ret = 0;
-
-    if (!fwpath)
-        return ret;
-    fd = TEMP_FAILURE_RETRY(open(WIFI_DRIVER_FW_PATH_PARAM, O_WRONLY));
-    if (fd < 0) {
-        ALOGE("Failed to open wlan fw path param (%s)", strerror(errno));
-        return -1;
-    }
-    len = strlen(fwpath) + 1;
-    if (TEMP_FAILURE_RETRY(write(fd, fwpath, len)) != len) {
-        ALOGE("Failed to write wlan fw path param (%s)", strerror(errno));
-        ret = -1;
-    }
-    close(fd);
-    return ret;
-}