func = (u8 *) __bpf_call_base + imm;
/* Save skb pointer if we need to re-cache skb data */
- if (bpf_helper_changes_skb_data(func))
+ if (bpf_helper_changes_pkt_data(func))
PPC_BPF_STL(3, 1, bpf_jit_stack_local(ctx));
bpf_jit_emit_func_call(image, ctx, (u64)func);
PPC_MR(b2p[BPF_REG_0], 3);
/* refresh skb cache */
- if (bpf_helper_changes_skb_data(func)) {
+ if (bpf_helper_changes_pkt_data(func)) {
/* reload skb pointer to r3 */
PPC_BPF_LL(3, 1, bpf_jit_stack_local(ctx));
bpf_jit_emit_skb_loads(image, ctx);
EMIT2(0x0d00, REG_14, REG_W1);
/* lgr %b0,%r2: load return value into %b0 */
EMIT4(0xb9040000, BPF_REG_0, REG_2);
- if (bpf_helper_changes_skb_data((void *)func)) {
+ if (bpf_helper_changes_pkt_data((void *)func)) {
jit->seen |= SEEN_SKB_CHANGE;
/* lg %b1,ST_OFF_SKBP(%r15) */
EMIT6_DISP_LH(0xe3000000, 0x0004, BPF_REG_1, REG_0,
func = (u8 *) __bpf_call_base + imm32;
jmp_offset = func - (image + addrs[i]);
if (seen_ld_abs) {
- reload_skb_data = bpf_helper_changes_skb_data(func);
+ reload_skb_data = bpf_helper_changes_pkt_data(func);
if (reload_skb_data) {
EMIT1(0x57); /* push %rdi */
jmp_offset += 22; /* pop, mov, sub, mov */
int err;
int i;
+ if (prog && prog->xdp_adjust_head) {
+ en_err(priv, "Does not support bpf_xdp_adjust_head()\n");
+ return -EOPNOTSUPP;
+ }
+
xdp_ring_num = prog ? priv->rx_ring_num : 0;
/* No need to reconfigure buffers when simply swapping the
bool reset, was_opened;
int i;
+ if (prog && prog->xdp_adjust_head) {
+ netdev_err(netdev, "Does not support bpf_xdp_adjust_head()\n");
+ return -EOPNOTSUPP;
+ }
+
mutex_lock(&priv->state_lock);
if ((netdev->features & NETIF_F_LRO) && prog) {
};
int err;
+ if (prog && prog->xdp_adjust_head) {
+ nn_err(nn, "Does not support bpf_xdp_adjust_head()\n");
+ return -EOPNOTSUPP;
+ }
if (!prog && !nn->xdp_prog)
return 0;
if (prog && nn->xdp_prog) {
{
struct qede_reload_args args;
+ if (prog && prog->xdp_adjust_head) {
+ DP_ERR(edev, "Does not support bpf_xdp_adjust_head()\n");
+ return -EOPNOTSUPP;
+ }
+
/* If we're called, there was already a bpf reference increment */
args.func = &qede_xdp_reload_func;
args.u.new_prog = prog;
u16 jited:1, /* Is our filter JIT'ed? */
gpl_compatible:1, /* Is filter GPL compatible? */
cb_access:1, /* Is control block accessed? */
- dst_needed:1; /* Do we need dst entry? */
+ dst_needed:1, /* Do we need dst entry? */
+ xdp_adjust_head:1; /* Adjusting pkt head? */
kmemcheck_bitfield_end(meta);
enum bpf_prog_type type; /* Type of BPF program */
u32 len; /* Number of filter blocks */
struct xdp_buff {
void *data;
void *data_end;
+ void *data_hard_start;
};
/* compute the linear packet data range [data, data_end) which
u64 __bpf_call_base(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5);
struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog);
-bool bpf_helper_changes_skb_data(void *func);
+bool bpf_helper_changes_pkt_data(void *func);
struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off,
const struct bpf_insn *patch, u32 len);
* @len: length of header to be pushed in front
* @flags: Flags (unused for now)
* Return: 0 on success or negative error
+ *
+ * int bpf_xdp_adjust_head(xdp_md, delta)
+ * Adjust the xdp_md.data by delta
+ * @xdp_md: pointer to xdp_md
+ * @delta: An positive/negative integer to be added to xdp_md.data
+ * Return: 0 on success or negative on error
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
FN(csum_update), \
FN(set_hash_invalid), \
FN(get_numa_node_id), \
- FN(skb_change_head),
+ FN(skb_change_head), \
+ FN(xdp_adjust_head),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call
__u32 protocol;
};
+#define XDP_PACKET_HEADROOM 256
+
/* User return codes for XDP prog type.
* A valid XDP program must return one of these defined values. All other
* return codes are reserved for future use. Unknown return codes will result
return prog;
}
-bool __weak bpf_helper_changes_skb_data(void *func)
+bool __weak bpf_helper_changes_pkt_data(void *func)
{
return false;
}
prog->dst_needed = 1;
if (insn->imm == BPF_FUNC_get_prandom_u32)
bpf_user_rnd_init_once();
+ if (insn->imm == BPF_FUNC_xdp_adjust_head)
+ prog->xdp_adjust_head = 1;
if (insn->imm == BPF_FUNC_tail_call) {
/* mark bpf_tail_call as different opcode
* to avoid conditional branch in
return -EINVAL;
}
- changes_data = bpf_helper_changes_skb_data(fn->func);
+ changes_data = bpf_helper_changes_pkt_data(fn->func);
memset(&meta, 0, sizeof(meta));
meta.pkt_access = fn->pkt_access;
.arg3_type = ARG_ANYTHING,
};
-bool bpf_helper_changes_skb_data(void *func)
+BPF_CALL_2(bpf_xdp_adjust_head, struct xdp_buff *, xdp, int, offset)
+{
+ void *data = xdp->data + offset;
+
+ if (unlikely(data < xdp->data_hard_start ||
+ data > xdp->data_end - ETH_HLEN))
+ return -EINVAL;
+
+ xdp->data = data;
+
+ return 0;
+}
+
+static const struct bpf_func_proto bpf_xdp_adjust_head_proto = {
+ .func = bpf_xdp_adjust_head,
+ .gpl_only = false,
+ .ret_type = RET_INTEGER,
+ .arg1_type = ARG_PTR_TO_CTX,
+ .arg2_type = ARG_ANYTHING,
+};
+
+bool bpf_helper_changes_pkt_data(void *func)
{
if (func == bpf_skb_vlan_push ||
func == bpf_skb_vlan_pop ||
func == bpf_skb_change_tail ||
func == bpf_skb_pull_data ||
func == bpf_l3_csum_replace ||
- func == bpf_l4_csum_replace)
+ func == bpf_l4_csum_replace ||
+ func == bpf_xdp_adjust_head)
return true;
return false;
return &bpf_xdp_event_output_proto;
case BPF_FUNC_get_smp_processor_id:
return &bpf_get_smp_processor_id_proto;
+ case BPF_FUNC_xdp_adjust_head:
+ return &bpf_xdp_adjust_head_proto;
default:
return sk_filter_func_proto(func_id);
}
OSDN Git Service
