ARM: sunxi: Remove sun4i reboot code from mach directory

Now that the restart code has been merged in the watchdog driver, we don't need
the restart code in the mach-sunxi directory anymore.

Remove it entirely.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 42d4753..d7598ae 100644 (file)
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -12,81 +12,9 @@
 
 #include <linux/clk-provider.h>
 #include <linux/clocksource.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-
-#define SUN4I_WATCHDOG_CTRL_REG                0x00
-#define SUN4I_WATCHDOG_CTRL_RESTART            BIT(0)
-#define SUN4I_WATCHDOG_MODE_REG                0x04
-#define SUN4I_WATCHDOG_MODE_ENABLE             BIT(0)
-#define SUN4I_WATCHDOG_MODE_RESET_ENABLE       BIT(1)
-
-#define SUN6I_WATCHDOG1_IRQ_REG                0x00
-#define SUN6I_WATCHDOG1_CTRL_REG       0x10
-#define SUN6I_WATCHDOG1_CTRL_RESTART           BIT(0)
-#define SUN6I_WATCHDOG1_CONFIG_REG     0x14
-#define SUN6I_WATCHDOG1_CONFIG_RESTART         BIT(0)
-#define SUN6I_WATCHDOG1_CONFIG_IRQ             BIT(1)
-#define SUN6I_WATCHDOG1_MODE_REG       0x18
-#define SUN6I_WATCHDOG1_MODE_ENABLE            BIT(0)
-
-static void __iomem *wdt_base;
-
-static void sun4i_restart(enum reboot_mode mode, const char *cmd)
-{
-       if (!wdt_base)
-               return;
-
-       /* Enable timer and set reset bit in the watchdog */
-       writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
-              wdt_base + SUN4I_WATCHDOG_MODE_REG);
-
-       /*
-        * Restart the watchdog. The default (and lowest) interval
-        * value for the watchdog is 0.5s.
-        */
-       writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG);
-
-       while (1) {
-               mdelay(5);
-               writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
-                      wdt_base + SUN4I_WATCHDOG_MODE_REG);
-       }
-}
-
-static struct of_device_id sunxi_restart_ids[] = {
-       { .compatible = "allwinner,sun4i-a10-wdt" },
-       { /*sentinel*/ }
-};
-
-static void sunxi_setup_restart(void)
-{
-       struct device_node *np;
-
-       np = of_find_matching_node(NULL, sunxi_restart_ids);
-       if (WARN(!np, "unable to setup watchdog restart"))
-               return;
-
-       wdt_base = of_iomap(np, 0);
-       WARN(!wdt_base, "failed to map watchdog base address");
-}
-
-static void __init sunxi_dt_init(void)
-{
-       sunxi_setup_restart();
-
-       of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
 
 static const char * const sunxi_board_dt_compat[] = {
        "allwinner,sun4i-a10",
@@ -96,9 +24,7 @@ static const char * const sunxi_board_dt_compat[] = {
 };
 
 DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
-       .init_machine   = sunxi_dt_init,
        .dt_compat      = sunxi_board_dt_compat,
-       .restart        = sun4i_restart,
 MACHINE_END
 
 static const char * const sun6i_board_dt_compat[] = {
@@ -126,9 +52,7 @@ static const char * const sun7i_board_dt_compat[] = {
 };
 
 DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
-       .init_machine   = sunxi_dt_init,
        .dt_compat      = sun7i_board_dt_compat,
-       .restart        = sun4i_restart,
 MACHINE_END
 
 static const char * const sun8i_board_dt_compat[] = {