OSDN Git Service

powerpc/fsl-booke: Add support for T2080/T2081 SoC
authorShengzhou Liu <Shengzhou.Liu@freescale.com>
Wed, 11 Jun 2014 10:10:04 +0000 (18:10 +0800)
committerScott Wood <scottwood@freescale.com>
Wed, 2 Jul 2014 22:32:41 +0000 (17:32 -0500)
The T2080 QorIQ multicore processor combines four dual-threaded e6500 Power
Architecture processor cores with high-performance datapath acceleration
logic and network and peripheral bus interfaces required for networking,
telecom/datacom, wireless infrastructure, and mil/aerospace applications.

The T2080 SoC includes the following function and features:
- Four dual-threaded 64-bit Power architecture e6500 cores, up to 1.8GHz
- 2MB L2 cache and 512KB CoreNet platform cache (CPC)
- Hierarchical interconnect fabric
- One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
- Data Path Acceleration Architecture (DPAA) incorporating acceleration
- 16 SerDes lanes up to 10.3125 GHz
- 8 Ethernet interfaces (multiple 1G/2.5G/10G MACs)
- High-speed peripheral interfaces
  - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0)
  - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz
- Additional peripheral interfaces
  - Two serial ATA (SATA 2.0) controllers
  - Two high-speed USB 2.0 controllers with integrated PHY
  - Enhanced secure digital host controller (SD/SDXC/eMMC)
  - Enhanced serial peripheral interface (eSPI)
  - Four I2C controllers
  - Four 2-pin UARTs or two 4-pin UARTs
  - Integrated Flash Controller supporting NAND and NOR flash
- Three eight-channel DMA engines
- Support for hardware virtualization and partitioning enforcement
- QorIQ Platform's Trust Architecture 2.0

T2081 is a reduced personality of T2080 with following difference:
Feature               T2080 T2081
1G Ethernet numbers:  8     6
10G Ethernet numbers: 4     2
SerDes lanes:         16    8
Serial RapidIO,RMan:  2     no
SATA Controller:      2     no
Aurora:               yes   no
SoC Package:          896-pins 780-pins

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[scottwood@freescale.com: added fsl,qoriq-pci-v3.0 for U-Boot compat]
Signed-off-by: Scott Wood <scottwood@freescale.com>
arch/powerpc/boot/dts/fsl/t2080si-post.dtsi [new file with mode: 0644]
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi [new file with mode: 0644]
arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi [new file with mode: 0644]
arch/powerpc/include/asm/mpc85xx.h

diff --git a/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi
new file mode 100644 (file)
index 0000000..082ec20
--- /dev/null
@@ -0,0 +1,69 @@
+/*
+ * T2080 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t2081si-post.dtsi"
+
+&soc {
+/include/ "qoriq-sata2-0.dtsi"
+       sata@220000 {
+               fsl,iommu-parent = <&pamu1>;
+               fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+       };
+
+/include/ "qoriq-sata2-1.dtsi"
+       sata@221000 {
+               fsl,iommu-parent = <&pamu1>;
+               fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+       };
+};
+
+&rio {
+       compatible = "fsl,srio";
+       interrupts = <16 2 1 11>;
+       #address-cells = <2>;
+       #size-cells = <2>;
+       ranges;
+
+       port1 {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               cell-index = <1>;
+       };
+
+       port2 {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               cell-index = <2>;
+       };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
new file mode 100644 (file)
index 0000000..97479f0
--- /dev/null
@@ -0,0 +1,435 @@
+/*
+ * T2081 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in the
+ *      documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *      names of its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+       #address-cells = <2>;
+       #size-cells = <1>;
+       compatible = "fsl,ifc", "simple-bus";
+       interrupts = <25 2 0 0>;
+};
+
+/* controller at 0x240000 */
+&pci0 {
+       compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0x0 0xff>;
+       interrupts = <20 2 0 0>;
+       fsl,iommu-parent = <&pamu0>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <20 2 0 0>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 40 1 0 0
+                       0000 0 0 2 &mpic 1 1 0 0
+                       0000 0 0 3 &mpic 2 1 0 0
+                       0000 0 0 4 &mpic 3 1 0 0
+               >;
+       };
+};
+
+/* controller at 0x250000 */
+&pci1 {
+       compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0 0xff>;
+       interrupts = <21 2 0 0>;
+       fsl,iommu-parent = <&pamu0>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <21 2 0 0>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 41 1 0 0
+                       0000 0 0 2 &mpic 5 1 0 0
+                       0000 0 0 3 &mpic 6 1 0 0
+                       0000 0 0 4 &mpic 7 1 0 0
+               >;
+       };
+};
+
+/* controller at 0x260000 */
+&pci2 {
+       compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0x0 0xff>;
+       interrupts = <22 2 0 0>;
+       fsl,iommu-parent = <&pamu0>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <22 2 0 0>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 42 1 0 0
+                       0000 0 0 2 &mpic 9 1 0 0
+                       0000 0 0 3 &mpic 10 1 0 0
+                       0000 0 0 4 &mpic 11 1 0 0
+               >;
+       };
+};
+
+/* controller at 0x270000 */
+&pci3 {
+       compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0x0 0xff>;
+       interrupts = <23 2 0 0>;
+       fsl,iommu-parent = <&pamu0>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <23 2 0 0>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 43 1 0 0
+                       0000 0 0 2 &mpic 0 1 0 0
+                       0000 0 0 3 &mpic 4 1 0 0
+                       0000 0 0 4 &mpic 8 1 0 0
+               >;
+       };
+};
+
+&dcsr {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "fsl,dcsr", "simple-bus";
+
+       dcsr-epu@0 {
+               compatible = "fsl,t2080-dcsr-epu", "fsl,dcsr-epu";
+               interrupts = <52 2 0 0
+                             84 2 0 0
+                             85 2 0 0
+                             94 2 0 0
+                             95 2 0 0>;
+               reg = <0x0 0x1000>;
+       };
+       dcsr-npc {
+               compatible = "fsl,t2080-dcsr-cnpc", "fsl,dcsr-cnpc";
+               reg = <0x1000 0x1000 0x1002000 0x10000>;
+       };
+       dcsr-nxc@2000 {
+               compatible = "fsl,dcsr-nxc";
+               reg = <0x2000 0x1000>;
+       };
+       dcsr-corenet {
+               compatible = "fsl,dcsr-corenet";
+               reg = <0x8000 0x1000 0x1A000 0x1000>;
+       };
+       dcsr-ocn@11000 {
+               compatible = "fsl,t2080-dcsr-ocn", "fsl,dcsr-ocn";
+               reg = <0x11000 0x1000>;
+       };
+       dcsr-ddr@12000 {
+               compatible = "fsl,dcsr-ddr";
+               dev-handle = <&ddr1>;
+               reg = <0x12000 0x1000>;
+       };
+       dcsr-nal@18000 {
+               compatible = "fsl,t2080-dcsr-nal", "fsl,dcsr-nal";
+               reg = <0x18000 0x1000>;
+       };
+       dcsr-rcpm@22000 {
+               compatible = "fsl,t2080-dcsr-rcpm", "fsl,dcsr-rcpm";
+               reg = <0x22000 0x1000>;
+       };
+       dcsr-snpc@30000 {
+               compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
+               reg = <0x30000 0x1000 0x1022000 0x10000>;
+       };
+       dcsr-snpc@31000 {
+               compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
+               reg = <0x31000 0x1000 0x1042000 0x10000>;
+       };
+       dcsr-snpc@32000 {
+               compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
+               reg = <0x32000 0x1000 0x1062000 0x10000>;
+       };
+       dcsr-cpu-sb-proxy@100000 {
+               compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu0>;
+               reg = <0x100000 0x1000 0x101000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@108000 {
+               compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu1>;
+               reg = <0x108000 0x1000 0x109000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@110000 {
+               compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu2>;
+               reg = <0x110000 0x1000 0x111000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@118000 {
+               compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu3>;
+               reg = <0x118000 0x1000 0x119000 0x1000>;
+       };
+};
+
+&soc {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       device_type = "soc";
+       compatible = "simple-bus";
+
+       soc-sram-error {
+               compatible = "fsl,soc-sram-error";
+               interrupts = <16 2 1 29>;
+       };
+
+       corenet-law@0 {
+               compatible = "fsl,corenet-law";
+               reg = <0x0 0x1000>;
+               fsl,num-laws = <32>;
+       };
+
+       ddr1: memory-controller@8000 {
+               compatible = "fsl,qoriq-memory-controller-v4.7",
+                               "fsl,qoriq-memory-controller";
+               reg = <0x8000 0x1000>;
+               interrupts = <16 2 1 23>;
+       };
+
+       cpc: l3-cache-controller@10000 {
+               compatible = "fsl,t2080-l3-cache-controller", "cache";
+               reg = <0x10000 0x1000
+                      0x11000 0x1000
+                      0x12000 0x1000>;
+               interrupts = <16 2 1 27
+                             16 2 1 26
+                             16 2 1 25>;
+       };
+
+       corenet-cf@18000 {
+               compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+               reg = <0x18000 0x1000>;
+               interrupts = <16 2 1 31>;
+               fsl,ccf-num-csdids = <32>;
+               fsl,ccf-num-snoopids = <32>;
+       };
+
+       iommu@20000 {
+               compatible = "fsl,pamu-v1.0", "fsl,pamu";
+               reg = <0x20000 0x3000>;
+               fsl,portid-mapping = <0x8000>;
+               ranges = <0 0x20000 0x3000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               interrupts = <
+                       24 2 0 0
+                       16 2 1 30>;
+
+               pamu0: pamu@0 {
+                       reg = <0 0x1000>;
+                       fsl,primary-cache-geometry = <32 1>;
+                       fsl,secondary-cache-geometry = <128 2>;
+               };
+
+               pamu1: pamu@1000 {
+                       reg = <0x1000 0x1000>;
+                       fsl,primary-cache-geometry = <32 1>;
+                       fsl,secondary-cache-geometry = <128 2>;
+               };
+
+               pamu2: pamu@2000 {
+                       reg = <0x2000 0x1000>;
+                       fsl,primary-cache-geometry = <32 1>;
+                       fsl,secondary-cache-geometry = <128 2>;
+               };
+       };
+
+/include/ "qoriq-mpic4.3.dtsi"
+
+       guts: global-utilities@e0000 {
+               compatible = "fsl,t2080-device-config", "fsl,qoriq-device-config-2.0";
+               reg = <0xe0000 0xe00>;
+               fsl,has-rstcr;
+               fsl,liodn-bits = <12>;
+       };
+
+       clockgen: global-utilities@e1000 {
+               compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0";
+               ranges = <0x0 0xe1000 0x1000>;
+               reg = <0xe1000 0x1000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               sysclk: sysclk {
+                       #clock-cells = <0>;
+                       compatible = "fsl,qoriq-sysclk-2.0";
+                       clock-output-names = "sysclk", "fixed-clock";
+               };
+
+               pll0: pll0@800 {
+                       #clock-cells = <1>;
+                       reg = <0x800 4>;
+                       compatible = "fsl,qoriq-core-pll-2.0";
+                       clocks = <&sysclk>;
+                       clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+               };
+
+               pll1: pll1@820 {
+                       #clock-cells = <1>;
+                       reg = <0x820 4>;
+                       compatible = "fsl,qoriq-core-pll-2.0";
+                       clocks = <&sysclk>;
+                       clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+               };
+
+               mux0: mux0@0 {
+                       #clock-cells = <0>;
+                       reg = <0x0 4>;
+                       compatible = "fsl,qoriq-core-mux-2.0";
+                       clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+                                <&pll1 0>, <&pll1 1>, <&pll1 2>;
+                       clock-names = "pll0", "pll0-div2", "pll1-div4",
+                               "pll1", "pll1-div2", "pll1-div4";
+                       clock-output-names = "cmux0";
+               };
+
+               mux1: mux1@20 {
+                       #clock-cells = <0>;
+                       reg = <0x20 4>;
+                       compatible = "fsl,qoriq-core-mux-2.0";
+                       clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+                                <&pll1 0>, <&pll1 1>, <&pll1 2>;
+                       clock-names = "pll0", "pll0-div2", "pll1-div4",
+                               "pll1", "pll1-div2", "pll1-div4";
+                       clock-output-names = "cmux1";
+               };
+       };
+
+       rcpm: global-utilities@e2000 {
+               compatible = "fsl,t2080-rcpm", "fsl,qoriq-rcpm-2.0";
+               reg = <0xe2000 0x1000>;
+       };
+
+       sfp: sfp@e8000 {
+               compatible = "fsl,t2080-sfp";
+               reg = <0xe8000 0x1000>;
+       };
+
+       serdes: serdes@ea000 {
+               compatible = "fsl,t2080-serdes";
+               reg = <0xea000 0x4000>;
+       };
+
+/include/ "elo3-dma-0.dtsi"
+       dma@100300 {
+               fsl,iommu-parent = <&pamu0>;
+               fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+       };
+/include/ "elo3-dma-1.dtsi"
+       dma@101300 {
+               fsl,iommu-parent = <&pamu0>;
+               fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+       };
+/include/ "elo3-dma-2.dtsi"
+       dma@102300 {
+               fsl,iommu-parent = <&pamu0>;
+               fsl,liodn-reg = <&guts 0x588>; /* DMA3LIODNR */
+       };
+
+/include/ "qoriq-espi-0.dtsi"
+       spi@110000 {
+               fsl,espi-num-chipselects = <4>;
+       };
+
+/include/ "qoriq-esdhc-0.dtsi"
+       sdhc@114000 {
+               compatible = "fsl,t2080-esdhc", "fsl,esdhc";
+               fsl,iommu-parent = <&pamu1>;
+               fsl,liodn-reg = <&guts 0x530>; /* SDMMCLIODNR */
+               sdhci,auto-cmd12;
+       };
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+       usb0: usb@210000 {
+               compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+               fsl,iommu-parent = <&pamu1>;
+               fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+               phy_type = "utmi";
+               port0;
+       };
+/include/ "qoriq-usb2-dr-0.dtsi"
+       usb1: usb@211000 {
+               compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+               fsl,iommu-parent = <&pamu1>;
+               fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */
+               dr_mode = "host";
+               phy_type = "utmi";
+       };
+/include/ "qoriq-sec5.2-0.dtsi"
+
+       L2_1: l2-cache-controller@c20000 {
+               /* Cluster 0 L2 cache */
+               compatible = "fsl,t2080-l2-cache-controller";
+               reg = <0xc20000 0x40000>;
+               next-level-cache = <&cpc>;
+       };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
new file mode 100644 (file)
index 0000000..e71ceb0
--- /dev/null
@@ -0,0 +1,99 @@
+/*
+ * T2080/T2081 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in the
+ *      documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *      names of its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <2>;
+       interrupt-parent = <&mpic>;
+
+       aliases {
+               ccsr = &soc;
+               dcsr = &dcsr;
+
+               serial0 = &serial0;
+               serial1 = &serial1;
+               serial2 = &serial2;
+               serial3 = &serial3;
+
+               crypto = &crypto;
+               pci0 = &pci0;
+               pci1 = &pci1;
+               pci2 = &pci2;
+               pci3 = &pci3;
+               usb0 = &usb0;
+               usb1 = &usb1;
+               dma0 = &dma0;
+               dma1 = &dma1;
+               dma2 = &dma2;
+               sdhc = &sdhc;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0: PowerPC,e6500@0 {
+                       device_type = "cpu";
+                       reg = <0 1>;
+                       clocks = <&mux0>;
+                       next-level-cache = <&L2_1>;
+                       fsl,portid-mapping = <0x80000000>;
+               };
+               cpu1: PowerPC,e6500@2 {
+                       device_type = "cpu";
+                       reg = <2 3>;
+                       clocks = <&mux0>;
+                       next-level-cache = <&L2_1>;
+                       fsl,portid-mapping = <0x80000000>;
+               };
+               cpu2: PowerPC,e6500@4 {
+                       device_type = "cpu";
+                       reg = <4 5>;
+                       clocks = <&mux0>;
+                       next-level-cache = <&L2_1>;
+                       fsl,portid-mapping = <0x80000000>;
+               };
+               cpu3: PowerPC,e6500@6 {
+                       device_type = "cpu";
+                       reg = <6 7>;
+                       clocks = <&mux0>;
+                       next-level-cache = <&L2_1>;
+                       fsl,portid-mapping = <0x80000000>;
+               };
+       };
+};
index 736d4ac..3bef74a 100644 (file)
@@ -77,6 +77,8 @@
 #define SVR_T1020      0x852100
 #define SVR_T1021      0x852101
 #define SVR_T1022      0x852102
+#define SVR_T2080      0x853000
+#define SVR_T2081      0x853100
 
 #define SVR_8610       0x80A000
 #define SVR_8641       0x809000