config ARCH_SUPPORTS_DEBUG_PAGEALLOC
def_bool y
+config KASAN_SHADOW_OFFSET
+ hex
+ depends on KASAN
+ default 0xdffffc0000000000
+
config HAVE_INTEL_TXT
def_bool y
depends on INTEL_IOMMU && ACPI
To compile command line arguments into the kernel,
set this option to 'Y', then fill in the
- the boot arguments in CONFIG_CMDLINE.
+ boot arguments in CONFIG_CMDLINE.
Systems with fully functional boot loaders (i.e. non-embedded)
should leave this option set to 'N'.
DECLARE_PER_CPU_READ_MOSTLY(unsigned long, espfix_waddr);
extern void init_espfix_bsp(void);
-extern void init_espfix_ap(void);
+extern void init_espfix_ap(int cpu);
#endif /* CONFIG_X86_64 */
#ifndef __ASSEMBLY__
-extern pte_t kasan_zero_pte[];
-extern pte_t kasan_zero_pmd[];
-extern pte_t kasan_zero_pud[];
-
#ifdef CONFIG_KASAN
-void __init kasan_map_early_shadow(pgd_t *pgd);
+void __init kasan_early_init(void);
void __init kasan_init(void);
#else
-static inline void kasan_map_early_shadow(pgd_t *pgd) { }
+static inline void kasan_early_init(void) { }
static inline void kasan_init(void) { }
#endif
int irq, vector;
struct apic_chip_data *data;
- /*
- * vector_lock will make sure that we don't run into irq vector
- * assignments that might be happening on another cpu in parallel,
- * while we setup our initial vector to irq mappings.
- */
- raw_spin_lock(&vector_lock);
/* Mark the inuse vectors */
for_each_active_irq(irq) {
data = apic_chip_data(irq_get_irq_data(irq));
if (!cpumask_test_cpu(cpu, data->domain))
per_cpu(vector_irq, cpu)[vector] = VECTOR_UNDEFINED;
}
- raw_spin_unlock(&vector_lock);
}
/*
- * Setup the vector to irq mappings.
+ * Setup the vector to irq mappings. Must be called with vector_lock held.
*/
void setup_vector_irq(int cpu)
{
int irq;
+ lockdep_assert_held(&vector_lock);
/*
* On most of the platforms, legacy PIC delivers the interrupts on the
* boot cpu. But there are certain platforms where PIC interrupts are
}
if (*s) {
- if (kstrtoul(s, 0, &baud) < 0 || baud == 0)
+ baud = simple_strtoull(s, &e, 0);
+
+ if (baud == 0 || s == e)
baud = DEFAULT_BAUD;
}
init_espfix_random();
/* The rest is the same as for any other processor */
- init_espfix_ap();
+ init_espfix_ap(0);
}
-void init_espfix_ap(void)
+void init_espfix_ap(int cpu)
{
- unsigned int cpu, page;
+ unsigned int page;
unsigned long addr;
pud_t pud, *pud_p;
pmd_t pmd, *pmd_p;
pte_t pte, *pte_p;
- int n;
+ int n, node;
void *stack_page;
pteval_t ptemask;
/* We only have to do this once... */
- if (likely(this_cpu_read(espfix_stack)))
+ if (likely(per_cpu(espfix_stack, cpu)))
return; /* Already initialized */
- cpu = smp_processor_id();
addr = espfix_base_addr(cpu);
page = cpu/ESPFIX_STACKS_PER_PAGE;
if (stack_page)
goto unlock_done;
+ node = cpu_to_node(cpu);
ptemask = __supported_pte_mask;
pud_p = &espfix_pud_page[pud_index(addr)];
pud = *pud_p;
if (!pud_present(pud)) {
- pmd_p = (pmd_t *)__get_free_page(PGALLOC_GFP);
+ struct page *page = alloc_pages_node(node, PGALLOC_GFP, 0);
+
+ pmd_p = (pmd_t *)page_address(page);
pud = __pud(__pa(pmd_p) | (PGTABLE_PROT & ptemask));
paravirt_alloc_pmd(&init_mm, __pa(pmd_p) >> PAGE_SHIFT);
for (n = 0; n < ESPFIX_PUD_CLONES; n++)
pmd_p = pmd_offset(&pud, addr);
pmd = *pmd_p;
if (!pmd_present(pmd)) {
- pte_p = (pte_t *)__get_free_page(PGALLOC_GFP);
+ struct page *page = alloc_pages_node(node, PGALLOC_GFP, 0);
+
+ pte_p = (pte_t *)page_address(page);
pmd = __pmd(__pa(pte_p) | (PGTABLE_PROT & ptemask));
paravirt_alloc_pte(&init_mm, __pa(pte_p) >> PAGE_SHIFT);
for (n = 0; n < ESPFIX_PMD_CLONES; n++)
}
pte_p = pte_offset_kernel(&pmd, addr);
- stack_page = (void *)__get_free_page(GFP_KERNEL);
+ stack_page = page_address(alloc_pages_node(node, GFP_KERNEL, 0));
pte = __pte(__pa(stack_page) | (__PAGE_KERNEL_RO & ptemask));
for (n = 0; n < ESPFIX_PTE_CLONES; n++)
set_pte(&pte_p[n*PTE_STRIDE], pte);
unlock_done:
mutex_unlock(&espfix_init_mutex);
done:
- this_cpu_write(espfix_stack, addr);
- this_cpu_write(espfix_waddr, (unsigned long)stack_page
- + (addr & ~PAGE_MASK));
+ per_cpu(espfix_stack, cpu) = addr;
+ per_cpu(espfix_waddr, cpu) = (unsigned long)stack_page
+ + (addr & ~PAGE_MASK);
}
/* Kill off the identity-map trampoline */
reset_early_page_tables();
- kasan_map_early_shadow(early_level4_pgt);
-
- /* clear bss before set_intr_gate with early_idt_handler */
clear_bss();
+ clear_page(init_level4_pgt);
+
+ kasan_early_init();
+
for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
set_intr_gate(i, early_idt_handler_array[i]);
load_idt((const struct desc_ptr *)&idt_descr);
*/
load_ucode_bsp();
- clear_page(init_level4_pgt);
/* set init_level4_pgt kernel high mapping*/
init_level4_pgt[511] = early_level4_pgt[511];
- kasan_map_early_shadow(init_level4_pgt);
-
x86_64_start_reservations(real_mode_data);
}
/* This must match the first entry in level2_kernel_pgt */
.quad 0x0000000000000000
-#ifdef CONFIG_KASAN
-#define FILL(VAL, COUNT) \
- .rept (COUNT) ; \
- .quad (VAL) ; \
- .endr
-
-NEXT_PAGE(kasan_zero_pte)
- FILL(kasan_zero_page - __START_KERNEL_map + _KERNPG_TABLE, 512)
-NEXT_PAGE(kasan_zero_pmd)
- FILL(kasan_zero_pte - __START_KERNEL_map + _KERNPG_TABLE, 512)
-NEXT_PAGE(kasan_zero_pud)
- FILL(kasan_zero_pmd - __START_KERNEL_map + _KERNPG_TABLE, 512)
-
-#undef FILL
-#endif
-
-
#include "../../x86/xen/xen-head.S"
__PAGE_ALIGNED_BSS
NEXT_PAGE(empty_zero_page)
.skip PAGE_SIZE
-#ifdef CONFIG_KASAN
-/*
- * This page used as early shadow. We don't use empty_zero_page
- * at early stages, stack instrumentation could write some garbage
- * to this page.
- * Latter we reuse it as zero shadow for large ranges of memory
- * that allowed to access, but not instrumented by kasan
- * (vmalloc/vmemmap ...).
- */
-NEXT_PAGE(kasan_zero_page)
- .skip PAGE_SIZE
-#endif
if (!desc)
continue;
+ /*
+ * Protect against concurrent action removal,
+ * affinity changes etc.
+ */
+ raw_spin_lock(&desc->lock);
data = irq_desc_get_irq_data(desc);
cpumask_copy(&affinity_new, data->affinity);
cpumask_clear_cpu(this_cpu, &affinity_new);
/* Do not count inactive or per-cpu irqs. */
- if (!irq_has_action(irq) || irqd_is_per_cpu(data))
+ if (!irq_has_action(irq) || irqd_is_per_cpu(data)) {
+ raw_spin_unlock(&desc->lock);
continue;
+ }
+ raw_spin_unlock(&desc->lock);
/*
* A single irq may be mapped to multiple
* cpu's vector_irq[] (for example IOAPIC cluster
* vector. If the vector is marked in the used vectors
* bitmap or an irq is assigned to it, we don't count
* it as available.
+ *
+ * As this is an inaccurate snapshot anyway, we can do
+ * this w/o holding vector_lock.
*/
for (vector = FIRST_EXTERNAL_VECTOR;
vector < first_system_vector; vector++) {
*/
mdelay(1);
+ /*
+ * We can walk the vector array of this cpu without holding
+ * vector_lock because the cpu is already marked !online, so
+ * nothing else will touch it.
+ */
for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
unsigned int irr;
irq = __this_cpu_read(vector_irq[vector]);
desc = irq_to_desc(irq);
+ raw_spin_lock(&desc->lock);
data = irq_desc_get_irq_data(desc);
chip = irq_data_get_irq_chip(data);
- raw_spin_lock(&desc->lock);
if (chip->irq_retrigger) {
chip->irq_retrigger(data);
__this_cpu_write(vector_irq[vector], VECTOR_RETRIGGERED);
apic_ap_setup();
/*
- * Need to setup vector mappings before we enable interrupts.
- */
- setup_vector_irq(smp_processor_id());
-
- /*
* Save our processor parameters. Note: this information
* is needed for clock calibration.
*/
check_tsc_sync_target();
/*
- * Enable the espfix hack for this CPU
- */
-#ifdef CONFIG_X86_ESPFIX64
- init_espfix_ap();
-#endif
-
- /*
- * We need to hold vector_lock so there the set of online cpus
- * does not change while we are assigning vectors to cpus. Holding
- * this lock ensures we don't half assign or remove an irq from a cpu.
+ * Lock vector_lock and initialize the vectors on this cpu
+ * before setting the cpu online. We must set it online with
+ * vector_lock held to prevent a concurrent setup/teardown
+ * from seeing a half valid vector space.
*/
lock_vector_lock();
+ setup_vector_irq(smp_processor_id());
set_cpu_online(smp_processor_id(), true);
unlock_vector_lock();
cpu_set_state_online(smp_processor_id());
initial_code = (unsigned long)start_secondary;
stack_start = idle->thread.sp;
+ /*
+ * Enable the espfix hack for this CPU
+ */
+#ifdef CONFIG_X86_ESPFIX64
+ init_espfix_ap(cpu);
+#endif
+
/* So we see what's up */
announce_cpu(cpu, apicid);
if (!pit_expect_msb(0xff-i, &delta, &d2))
break;
+ delta -= tsc;
+
+ /*
+ * Extrapolate the error and fail fast if the error will
+ * never be below 500 ppm.
+ */
+ if (i == 1 &&
+ d1 + d2 >= (delta * MAX_QUICK_PIT_ITERATIONS) >> 11)
+ return 0;
+
/*
* Iterate until the error is less than 500 ppm
*/
- delta -= tsc;
if (d1+d2 >= delta >> 11)
continue;
+#define pr_fmt(fmt) "kasan: " fmt
#include <linux/bootmem.h>
#include <linux/kasan.h>
#include <linux/kdebug.h>
extern pgd_t early_level4_pgt[PTRS_PER_PGD];
extern struct range pfn_mapped[E820_X_MAX];
-extern unsigned char kasan_zero_page[PAGE_SIZE];
+static pud_t kasan_zero_pud[PTRS_PER_PUD] __page_aligned_bss;
+static pmd_t kasan_zero_pmd[PTRS_PER_PMD] __page_aligned_bss;
+static pte_t kasan_zero_pte[PTRS_PER_PTE] __page_aligned_bss;
+
+/*
+ * This page used as early shadow. We don't use empty_zero_page
+ * at early stages, stack instrumentation could write some garbage
+ * to this page.
+ * Latter we reuse it as zero shadow for large ranges of memory
+ * that allowed to access, but not instrumented by kasan
+ * (vmalloc/vmemmap ...).
+ */
+static unsigned char kasan_zero_page[PAGE_SIZE] __page_aligned_bss;
static int __init map_range(struct range *range)
{
pgd_clear(pgd_offset_k(start));
}
-void __init kasan_map_early_shadow(pgd_t *pgd)
+static void __init kasan_map_early_shadow(pgd_t *pgd)
{
int i;
unsigned long start = KASAN_SHADOW_START;
while (IS_ALIGNED(addr, PMD_SIZE) && addr + PMD_SIZE <= end) {
WARN_ON(!pmd_none(*pmd));
set_pmd(pmd, __pmd(__pa_nodebug(kasan_zero_pte)
- | __PAGE_KERNEL_RO));
+ | _KERNPG_TABLE));
addr += PMD_SIZE;
pmd = pmd_offset(pud, addr);
}
while (IS_ALIGNED(addr, PUD_SIZE) && addr + PUD_SIZE <= end) {
WARN_ON(!pud_none(*pud));
set_pud(pud, __pud(__pa_nodebug(kasan_zero_pmd)
- | __PAGE_KERNEL_RO));
+ | _KERNPG_TABLE));
addr += PUD_SIZE;
pud = pud_offset(pgd, addr);
}
while (IS_ALIGNED(addr, PGDIR_SIZE) && addr + PGDIR_SIZE <= end) {
WARN_ON(!pgd_none(*pgd));
set_pgd(pgd, __pgd(__pa_nodebug(kasan_zero_pud)
- | __PAGE_KERNEL_RO));
+ | _KERNPG_TABLE));
addr += PGDIR_SIZE;
pgd = pgd_offset_k(addr);
}
};
#endif
+void __init kasan_early_init(void)
+{
+ int i;
+ pteval_t pte_val = __pa_nodebug(kasan_zero_page) | __PAGE_KERNEL;
+ pmdval_t pmd_val = __pa_nodebug(kasan_zero_pte) | _KERNPG_TABLE;
+ pudval_t pud_val = __pa_nodebug(kasan_zero_pmd) | _KERNPG_TABLE;
+
+ for (i = 0; i < PTRS_PER_PTE; i++)
+ kasan_zero_pte[i] = __pte(pte_val);
+
+ for (i = 0; i < PTRS_PER_PMD; i++)
+ kasan_zero_pmd[i] = __pmd(pmd_val);
+
+ for (i = 0; i < PTRS_PER_PUD; i++)
+ kasan_zero_pud[i] = __pud(pud_val);
+
+ kasan_map_early_shadow(early_level4_pgt);
+ kasan_map_early_shadow(init_level4_pgt);
+}
+
void __init kasan_init(void)
{
int i;
memcpy(early_level4_pgt, init_level4_pgt, sizeof(early_level4_pgt));
load_cr3(early_level4_pgt);
+ __flush_tlb_all();
clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
memset(kasan_zero_page, 0, PAGE_SIZE);
load_cr3(init_level4_pgt);
+ __flush_tlb_all();
init_task.kasan_depth = 0;
+
+ pr_info("Kernel address sanitizer initialized\n");
}
For better error detection enable CONFIG_STACKTRACE,
and add slub_debug=U to boot cmdline.
-config KASAN_SHADOW_OFFSET
- hex
- default 0xdffffc0000000000 if X86_64
-
choice
prompt "Instrumentation type"
depends on KASAN
OSDN Git Service
