title: Allwinner A10 MMC Controller
allOf:
- - $ref: "mmc-controller.yaml"
+ - $ref: mmc-controller.yaml
maintainers:
- Chen-Yu Tsai <wens@csie.org>
title: Amlogic Meson SDHC controller
allOf:
- - $ref: "mmc-controller.yaml"
+ - $ref: mmc-controller.yaml
maintainers:
- Martin Blumenstingl <martin.blumenstingl@googlemail.com>
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/mmc/arasan,sdhci.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mmc/arasan,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Arasan SDHCI Controller
- Adrian Hunter <adrian.hunter@intel.com>
allOf:
- - $ref: "mmc-controller.yaml#"
+ - $ref: mmc-controller.yaml#
- if:
properties:
compatible:
cdns,phy-input-delay-sd-highspeed:
description: Value of the delay in the input path for SD high-speed timing
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-legacy:
description: Value of the delay in the input path for legacy timing
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-sd-uhs-sdr12:
description: Value of the delay in the input path for SD UHS SDR12 timing
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-sd-uhs-sdr25:
description: Value of the delay in the input path for SD UHS SDR25 timing
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-sd-uhs-sdr50:
description: Value of the delay in the input path for SD UHS SDR50 timing
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-sd-uhs-ddr50:
description: Value of the delay in the input path for SD UHS DDR50 timing
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0x1f
cdns,phy-input-delay-mmc-highspeed:
description: Value of the delay in the input path for MMC high-speed timing
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0x1f
# Each delay property represents the fraction of the clock period.
# The approximate delay value will be
# (<delay property value>/128)*sdmclk_clock_period.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0x1f
description: |
Value of the delay introduced on the sdclk output for all modes except
HS200, HS400 and HS400_ES.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0x7f
description: |
Value of the delay introduced on the sdclk output for HS200, HS400 and
HS400_ES speed modes.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0x7f
description: |
Value of the delay introduced on the dat_strobe input used in
HS400 / HS400_ES speed modes.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0x7f
- Shawn Guo <shawnguo@kernel.org>
allOf:
- - $ref: "mmc-controller.yaml"
+ - $ref: mmc-controller.yaml
description: |
The Enhanced Secure Digital Host Controller on Freescale i.MX family
default: 0
voltage-ranges:
- $ref: '/schemas/types.yaml#/definitions/uint32-matrix'
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
description: |
Specify the voltage range in case there are software transparent level
shifters on the outputs of the controller. Two cells are required, first
- Markus Pargmann <mpa@pengutronix.de>
allOf:
- - $ref: "mmc-controller.yaml"
+ - $ref: mmc-controller.yaml
properties:
compatible:
title: Microchip Sparx5 Mobile Storage Host Controller
allOf:
- - $ref: "mmc-controller.yaml"
+ - $ref: mmc-controller.yaml
maintainers:
- Lars Povlsen <lars.povlsen@microchip.com>
microchip,clock-delay:
description: Delay clock to card to meet setup time requirements.
Each step increase by 1.25ns.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 15
- Ulf Hansson <ulf.hansson@linaro.org>
allOf:
- - $ref: "mmc-controller.yaml"
+ - $ref: mmc-controller.yaml
- $ref: /schemas/spi/spi-peripheral-props.yaml
description: |
and the properties used by the mxsmmc driver.
allOf:
- - $ref: "mmc-controller.yaml"
+ - $ref: mmc-controller.yaml
properties:
compatible:
maxItems: 1
operating-points-v2:
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
power-domains:
items:
The DQS trim values are only used on controllers which support HS400
timing. Only SDMMC4 on Tegra210 and Tegra186 supports HS400.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,default-trim:
description: Specify the default outbound clock trimmer value.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,dqs-trim:
description: Specify DQS trim value for HS400 timing.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,pad-autocal-pull-down-offset-1v8:
description: Specify drive strength calibration offsets for 1.8 V
signaling modes.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,pad-autocal-pull-down-offset-1v8-timeout:
description: Specify drive strength used as a fallback in case the
automatic calibration times out on a 1.8 V signaling mode.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,pad-autocal-pull-down-offset-3v3:
description: Specify drive strength calibration offsets for 3.3 V
signaling modes.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,pad-autocal-pull-down-offset-3v3-timeout:
description: Specify drive strength used as a fallback in case the
automatic calibration times out on a 3.3 V signaling mode.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,pad-autocal-pull-down-offset-sdr104:
description: Specify drive strength calibration offsets for SDR104 mode.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,pad-autocal-pull-down-offset-hs400:
description: Specify drive strength calibration offsets for HS400 mode.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,pad-autocal-pull-up-offset-1v8:
description: Specify drive strength calibration offsets for 1.8 V
signaling modes.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,pad-autocal-pull-up-offset-1v8-timeout:
description: Specify drive strength used as a fallback in case the
automatic calibration times out on a 1.8 V signaling mode.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,pad-autocal-pull-up-offset-3v3:
description: Specify drive strength calibration offsets for 3.3 V
refer to the reference manual of the SoC for correct values. The SDR104
and HS400 timing specific values are used in corresponding modes if
specified.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,pad-autocal-pull-up-offset-3v3-timeout:
description: Specify drive strength used as a fallback in case the
automatic calibration times out on a 3.3 V signaling mode.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,pad-autocal-pull-up-offset-sdr104:
description: Specify drive strength calibration offsets for SDR104 mode.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,pad-autocal-pull-up-offset-hs400:
description: Specify drive strength calibration offsets for HS400 mode.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,only-1-8v:
description: The presence of this property indicates that the controller
operates at a 1.8 V fixed I/O voltage.
- $ref: "/schemas/types.yaml#/definitions/flag"
+ $ref: /schemas/types.yaml#/definitions/flag
required:
- compatible
- reset-names
allOf:
- - $ref: "mmc-controller.yaml"
+ - $ref: mmc-controller.yaml
- if:
properties:
compatible:
title: Actions Semi Owl SoCs SD/MMC/SDIO controller
allOf:
- - $ref: "mmc-controller.yaml"
+ - $ref: mmc-controller.yaml
maintainers:
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
- Wolfram Sang <wsa+renesas@sang-engineering.com>
allOf:
- - $ref: "mmc-controller.yaml"
+ - $ref: mmc-controller.yaml
properties:
compatible:
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/mmc/renesas,sdhi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mmc/renesas,sdhi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas SDHI SD/MMC controller
max-frequency: true
allOf:
- - $ref: "mmc-controller.yaml"
+ - $ref: mmc-controller.yaml
- if:
properties:
file and the Rockchip specific extensions.
allOf:
- - $ref: "synopsys-dw-mshc-common.yaml#"
+ - $ref: synopsys-dw-mshc-common.yaml#
maintainers:
- Heiko Stuebner <heiko@sntech.de>
- samsung,dw-mshc-sdr-timing
allOf:
- - $ref: "synopsys-dw-mshc-common.yaml#"
+ - $ref: synopsys-dw-mshc-common.yaml#
- if:
properties:
compatible:
- Li-hao Kuo <lhjeff911@gmail.com>
allOf:
- - $ref: "mmc-controller.yaml"
+ - $ref: mmc-controller.yaml
properties:
compatible:
title: Synopsys Designware Mobile Storage Host Controller Common Properties
allOf:
- - $ref: "mmc-controller.yaml#"
+ - $ref: mmc-controller.yaml#
maintainers:
- Ulf Hansson <ulf.hansson@linaro.org>