OSDN Git Service

net: dsa: sja1105: Update some comments about PHYLIB
authorVladimir Oltean <olteanv@gmail.com>
Sat, 8 Jun 2019 13:03:42 +0000 (16:03 +0300)
committerDavid S. Miller <davem@davemloft.net>
Mon, 10 Jun 2019 02:58:58 +0000 (19:58 -0700)
Since the driver is now using PHYLINK exclusively, it makes sense to
remove all references to it and replace them with PHYLINK.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/dsa/sja1105/Kconfig
drivers/net/dsa/sja1105/sja1105_main.c

index 049cea8..105e8d3 100644 (file)
@@ -9,7 +9,7 @@ tristate "NXP SJA1105 Ethernet switch family support"
          This is the driver for the NXP SJA1105 automotive Ethernet switch
          family. These are 5-port devices and are managed over an SPI
          interface. Probing is handled based on OF bindings and so is the
-         linkage to phylib. The driver supports the following revisions:
+         linkage to PHYLINK. The driver supports the following revisions:
            - SJA1105E (Gen. 1, No TT-Ethernet)
            - SJA1105T (Gen. 1, TT-Ethernet)
            - SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
index f052e88..faf0fce 100644 (file)
@@ -70,8 +70,7 @@ static int sja1105_init_mac_settings(struct sja1105_private *priv)
                /* Keep standard IFG of 12 bytes on egress. */
                .ifg = 0,
                /* Always put the MAC speed in automatic mode, where it can be
-                * retrieved from the PHY object through phylib and
-                * sja1105_adjust_port_config.
+                * adjusted at runtime by PHYLINK.
                 */
                .speed = SJA1105_SPEED_AUTO,
                /* No static correction for 1-step 1588 events */
@@ -116,7 +115,6 @@ static int sja1105_init_mac_settings(struct sja1105_private *priv)
        if (!table->entries)
                return -ENOMEM;
 
-       /* Override table based on phylib DT bindings */
        table->entry_count = SJA1105_NUM_PORTS;
 
        mac = table->entries;
@@ -157,7 +155,7 @@ static int sja1105_init_mii_settings(struct sja1105_private *priv,
        if (!table->entries)
                return -ENOMEM;
 
-       /* Override table based on phylib DT bindings */
+       /* Override table based on PHYLINK DT bindings */
        table->entry_count = SJA1105_MAX_XMII_PARAMS_COUNT;
 
        mii = table->entries;