static void
avr_io_reg_read_command (char *args, int from_tty)
{
- int bufsiz = 0;
+ LONGEST bufsiz = 0;
char buf[400];
char query[400];
char *p;
unsigned int val;
int i, j, k, step;
- if (!current_target.to_query)
+ /* Just get the maximum buffer size. */
+ bufsiz = target_read_partial (¤t_target, TARGET_OBJECT_AVR,
+ NULL, NULL, 0, 0);
+ if (bufsiz < 0)
{
fprintf_unfiltered (gdb_stderr,
"ERR: info io_registers NOT supported by current "
"target\n");
return;
}
-
- /* Just get the maximum buffer size. */
- target_query ((int) 'R', 0, 0, &bufsiz);
if (bufsiz > sizeof (buf))
bufsiz = sizeof (buf);
/* Find out how many io registers the target has. */
strcpy (query, "avr.io_reg");
- target_query ((int) 'R', query, buf, &bufsiz);
+ target_read_partial (¤t_target, TARGET_OBJECT_AVR, query, buf, 0,
+ bufsiz);
if (strncmp (buf, "", bufsiz) == 0)
{
j = nreg - i; /* last block is less than 8 registers */
snprintf (query, sizeof (query) - 1, "avr.io_reg:%x,%x", i, j);
- target_query ((int) 'R', query, buf, &bufsiz);
+ target_read_partial (¤t_target, TARGET_OBJECT_AVR, query, buf,
+ 0, bufsiz);
p = buf;
for (k = i; k < (i + j); k++)
static void
gdb_kod_query (char *arg, char *result, int *maxsiz)
{
- int bufsiz = 0;
+ LONGEST bufsiz = 0;
- /* Check if current target has remote_query capabilities.
- If not, it does not have kod either. */
- if (! current_target.to_query)
+ /* Check if current target has remote_query capabilities. If not,
+ it does not have kod either. */
+ bufsiz = target_read_partial (¤t_target, TARGET_OBJECT_KOD,
+ NULL, NULL, 0, 0);
+ if (bufsiz < 0)
{
strcpy (result,
"ERR: Kernel Object Display not supported by current target\n");
}
/* Just get the maximum buffer size. */
- target_query ((int) 'K', 0, 0, &bufsiz);
/* Check if *we* were called just for getting the buffer size. */
if (*maxsiz == 0)
error ("kod: query argument too long");
/* Send actual request. */
- if (target_query ((int) 'K', arg, result, &bufsiz))
+ if (target_read_partial (¤t_target, TARGET_OBJECT_KOD,
+ arg, result, 0, bufsiz) < 0)
strcpy (result, "ERR: remote query failed");
}
static int stubhex (int ch);
-static int remote_query (int /*char */ , char *, char *, int *);
-
static int hexnumstr (char *, ULONGEST);
static int hexnumnstr (char *, ULONGEST, int);
printf_filtered ("No loaded section named '%s'.\n", args);
}
-static int
-remote_query (int query_type, char *buf, char *outbuf, int *bufsiz)
+static LONGEST
+remote_read_partial (struct target_ops *ops, enum target_object object,
+ const char *annex, void *buf,
+ ULONGEST offset, LONGEST len)
{
struct remote_state *rs = get_remote_state ();
int i;
char *buf2 = alloca (rs->remote_packet_size);
char *p2 = &buf2[0];
+ char query_type;
- if (!bufsiz)
- error ("null pointer to remote bufer size specified");
-
- /* minimum outbuf size is (rs->remote_packet_size) - if bufsiz is not large enough let
- the caller know and return what the minimum size is */
- /* Note: a zero bufsiz can be used to query the minimum buffer size */
- if (*bufsiz < (rs->remote_packet_size))
+ /* Map pre-existing objects onto letters. DO NOT do this for new
+ objects!!! Instead specify new query packets. */
+ switch (object)
{
- *bufsiz = (rs->remote_packet_size);
+ case TARGET_OBJECT_KOD:
+ query_type = 'K';
+ break;
+ case TARGET_OBJECT_AVR:
+ query_type = 'R';
+ break;
+ default:
return -1;
}
+ /* Note: a zero BUF, OFFSET and LEN can be used to query the minimum
+ buffer size. */
+ if (buf == NULL && offset == 0 && len == 0)
+ return (rs->remote_packet_size);
+ /* Minimum outbuf size is (rs->remote_packet_size) - if bufsiz is
+ not large enough let the caller. */
+ if (len < (rs->remote_packet_size))
+ return -1;
+ len = rs->remote_packet_size;
+
/* except for querying the minimum buffer size, target must be open */
if (!remote_desc)
error ("remote query is only available after target open");
- /* we only take uppercase letters as query types, at least for now */
- if ((query_type < 'A') || (query_type > 'Z'))
- error ("invalid remote query type");
-
- if (!buf)
- error ("null remote query specified");
-
- if (!outbuf)
- error ("remote query requires a buffer to receive data");
-
- outbuf[0] = '\0';
+ gdb_assert (annex != NULL);
+ gdb_assert (buf != NULL);
*p2++ = 'q';
*p2++ = query_type;
plus one extra in case we are debugging (remote_debug),
we have PBUFZIZ - 7 left to pack the query string */
i = 0;
- while (buf[i] && (i < ((rs->remote_packet_size) - 8)))
+ while (annex[i] && (i < ((rs->remote_packet_size) - 8)))
{
- /* bad caller may have sent forbidden characters */
- if ((!isprint (buf[i])) || (buf[i] == '$') || (buf[i] == '#'))
- error ("illegal characters in query string");
-
- *p2++ = buf[i];
+ /* Bad caller may have sent forbidden characters. */
+ gdb_assert (isprint (annex[i]) && annex[i] != '$' && annex[i] != '#');
+ *p2++ = annex[i];
i++;
}
- *p2 = buf[i];
-
- if (buf[i])
- error ("query larger than available buffer");
+ *p2 = '\0';
+ gdb_assert (annex[i] == '\0');
i = putpkt (buf2);
if (i < 0)
return i;
- getpkt (outbuf, *bufsiz, 0);
+ getpkt (buf, len, 0);
- return 0;
+ return strlen (buf);
}
static void
remote_ops.to_pid_to_str = remote_pid_to_str;
remote_ops.to_extra_thread_info = remote_threads_extra_info;
remote_ops.to_stop = remote_stop;
- remote_ops.to_query = remote_query;
+ remote_ops.to_read_partial = remote_read_partial;
remote_ops.to_rcmd = remote_rcmd;
remote_ops.to_stratum = process_stratum;
remote_ops.to_has_all_memory = 1;
remote_async_ops.to_pid_to_str = remote_pid_to_str;
remote_async_ops.to_extra_thread_info = remote_threads_extra_info;
remote_async_ops.to_stop = remote_stop;
- remote_async_ops.to_query = remote_query;
+ remote_async_ops.to_read_partial = remote_read_partial;
remote_async_ops.to_rcmd = remote_rcmd;
remote_async_ops.to_stratum = process_stratum;
remote_async_ops.to_has_all_memory = 1;
static void debug_to_stop (void);
-static int debug_to_query (int /*char */ , char *, char *, int *);
-
/* Pointer to array of target architecture structures; the size of the
array; the current index into the array; the allocated size of the
array. */
INHERIT (to_pid_to_str, t);
INHERIT (to_extra_thread_info, t);
INHERIT (to_stop, t);
- INHERIT (to_query, t);
+ /* Do not inherit to_read_partial. */
+ /* Do not inherit to_write_partial. */
INHERIT (to_rcmd, t);
INHERIT (to_enable_exception_callback, t);
INHERIT (to_get_current_exception_event, t);
return target_xfer_memory_partial (memaddr, buf, len, 1, err);
}
+/* More generic transfers. */
+
+LONGEST
+target_read_partial (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, void *buf,
+ ULONGEST offset, LONGEST len)
+{
+ struct target_ops *op;
+
+ /* Find the first target stratum that can handle the request. */
+ for (op = ops;
+ op != NULL && op->to_read_partial == NULL;
+ op = op->beneath)
+ ;
+ if (op == NULL)
+ return -1;
+
+ /* Now apply the operation at that level. */
+ return op->to_read_partial (op, object, annex, buf, offset, len);
+}
+
+LONGEST
+target_write_partial (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const void *buf,
+ ULONGEST offset, LONGEST len)
+{
+ struct target_ops *op;
+
+ /* Find the first target stratum that can handle the request. */
+ for (op = ops;
+ op != NULL && op->to_write_partial == NULL;
+ op = op->beneath)
+ ;
+ if (op == NULL)
+ return -1;
+
+ return op->to_write_partial (op, object, annex, buf, offset, len);
+}
+
+/* Wrappers to perform the full transfer. */
+LONGEST
+target_read (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, void *buf,
+ ULONGEST offset, LONGEST len)
+{
+ LONGEST xfered = 0;
+ while (xfered < len)
+ {
+ LONGEST xfer = target_write_partial (ops, object, annex,
+ (bfd_byte *) buf + xfered,
+ offset + xfered, len - xfered);
+ /* Call an observer, notifying them of the xfer progress? */
+ if (xfer < 0)
+ return xfer;
+ xfered += xfer;
+ QUIT;
+ }
+ return len;
+}
+
+LONGEST
+target_write (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const void *buf,
+ ULONGEST offset, LONGEST len)
+{
+ LONGEST xfered = 0;
+ while (xfered < len)
+ {
+ LONGEST xfer = target_write_partial (ops, object, annex,
+ (bfd_byte *) buf + xfered,
+ offset + xfered, len - xfered);
+ /* Call an observer, notifying them of the xfer progress? */
+ if (xfer < 0)
+ return xfer;
+ xfered += xfer;
+ QUIT;
+ }
+ return len;
+}
+
static void
target_info (char *args, int from_tty)
{
fprintf_unfiltered (gdb_stdlog, "target_stop ()\n");
}
-static int
-debug_to_query (int type, char *req, char *resp, int *siz)
+static LONGEST
+debug_to_read_partial (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, void *buf,
+ ULONGEST offset, LONGEST len)
{
- int retval;
+ LONGEST retval;
+
+ retval = target_read_partial (&debug_target, object, annex, buf, offset,
+ len);
- retval = debug_target.to_query (type, req, resp, siz);
+ fprintf_unfiltered (gdb_stdlog,
+ "target_read_partial (%d, %s, 0x%lx, 0x%s, %s) = %s\n",
+ (int) object, (annex ? annex : "(null)"),
+ (long) buf, paddr_nz (offset),
+ paddr_d (len), paddr_d (retval));
+
+ return retval;
+}
- fprintf_unfiltered (gdb_stdlog, "target_query (%c, %s, %s, %d) = %d\n", type, req, resp, *siz, retval);
+static LONGEST
+debug_to_write_partial (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const void *buf,
+ ULONGEST offset, LONGEST len)
+{
+ LONGEST retval;
+
+ retval = target_write_partial (&debug_target, object, annex, buf, offset,
+ len);
+
+ fprintf_unfiltered (gdb_stdlog,
+ "target_write_partial (%d, %s, 0x%lx, 0x%s, %s) = %s\n",
+ (int) object, (annex ? annex : "(null)"),
+ (long) buf, paddr_nz (offset),
+ paddr_d (len), paddr_d (retval));
return retval;
}
current_target.to_thread_alive = debug_to_thread_alive;
current_target.to_find_new_threads = debug_to_find_new_threads;
current_target.to_stop = debug_to_stop;
- current_target.to_query = debug_to_query;
+ current_target.to_read_partial = debug_to_read_partial;
+ current_target.to_write_partial = debug_to_write_partial;
current_target.to_rcmd = debug_to_rcmd;
current_target.to_enable_exception_callback = debug_to_enable_exception_callback;
current_target.to_get_current_exception_event = debug_to_get_current_exception_event;
struct objfile;
struct ui_file;
struct mem_attrib;
+struct target_ops;
/* This include file defines the interface between the main part
of the debugger, and the part which is target-specific, or
/* Given a name (SIGHUP, etc.), return its signal. */
enum target_signal target_signal_from_name (char *);
\f
+/* Request the transfer of up to LEN 8-bit bytes of the target's
+ OBJECT. The OFFSET, for a seekable object, specifies the starting
+ point. The ANNEX can be used to provide additional data-specific
+ information to the target.
+
+ Return the number of bytes actually transfered, zero when no
+ further transfer is possible, and -1 when the transfer is not
+ supported.
+
+ NOTE: cagney/2003-10-17: The current interface does not support a
+ "retry" mechanism. Instead it assumes that at least one byte will
+ be transfered on each call.
+
+ NOTE: cagney/2003-10-17: The current interface can lead to
+ fragmented transfers. Lower target levels should not implement
+ hacks, such as enlarging the transfer, in an attempt to compensate
+ for this. Instead, the target stack should be extended so that it
+ implements supply/collect methods and a look-aside object cache.
+ With that available, the lowest target can safely and freely "push"
+ data up the stack.
+
+ NOTE: cagney/2003-10-17: Unlike the old query and the memory
+ transfer mechanisms, these methods are explicitly parameterized by
+ the target that it should be applied to.
+
+ NOTE: cagney/2003-10-17: Just like the old query and memory xfer
+ methods, these new methods perform partial transfers. The only
+ difference is that these new methods thought to include "partial"
+ in the name. The old code's failure to do this lead to much
+ confusion and duplication of effort as each target object attempted
+ to locally take responsibility for something it didn't have to
+ worry about.
+
+ NOTE: cagney/2003-10-17: For backward compatibility with the
+ "target_query" method that this replaced, when BUF, OFFSET and LEN
+ are NULL/zero, return the "minimum" buffer size. See "remote.c"
+ for further information. */
+
+enum target_object
+{
+ /* Kernel Object Display transfer. See "kod.c" and "remote.c". */
+ TARGET_OBJECT_KOD,
+ /* AVR target specific transfer. See "avr-tdep.c" and "remote.c". */
+ TARGET_OBJECT_AVR,
+ /* Transfer up-to LEN bytes of memory starting at OFFSET. */
+ TARGET_OBJECT_MEORY
+ /* Possible future ojbects: TARGET_OJBECT_FILE, TARGET_OBJECT_PROC,
+ TARGET_OBJECT_AUXV, ... */
+};
+
+extern LONGEST target_read_partial (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, void *buf,
+ ULONGEST offset, LONGEST len);
+
+extern LONGEST target_write_partial (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const void *buf,
+ ULONGEST offset, LONGEST len);
+
+/* Wrappers to perform the full transfer. */
+extern LONGEST target_read (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, void *buf,
+ ULONGEST offset, LONGEST len);
+
+extern LONGEST target_write (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const void *buf,
+ ULONGEST offset, LONGEST len);
+\f
/* If certain kinds of activity happen, target_wait should perform
callbacks. */
char *(*to_pid_to_str) (ptid_t);
char *(*to_extra_thread_info) (struct thread_info *);
void (*to_stop) (void);
- int (*to_query) (int /*char */ , char *, char *, int *);
void (*to_rcmd) (char *command, struct ui_file *output);
struct symtab_and_line *(*to_enable_exception_callback) (enum
exception_event_kind,
struct objfile *objfile,
CORE_ADDR offset);
+ /* See above. */
+ LONGEST (*to_read_partial) (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, void *buf,
+ ULONGEST offset, LONGEST len);
+ LONGEST (*to_write_partial) (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const void *buf,
+ ULONGEST offset, LONGEST len);
+
int to_magic;
/* Need sub-structure for target machine related rather than comm related?
*/
#define target_stop current_target.to_stop
-/* Queries the target side for some information. The first argument is a
- letter specifying the type of the query, which is used to determine who
- should process it. The second argument is a string that specifies which
- information is desired and the third is a buffer that carries back the
- response from the target side. The fourth parameter is the size of the
- output buffer supplied. */
-
-#define target_query(query_type, query, resp_buffer, bufffer_size) \
- (*current_target.to_query) (query_type, query, resp_buffer, bufffer_size)
-
/* Send the specified COMMAND to the target's monitor
(shell,interpreter) for execution. The result of the query is
placed in OUTBUF. */