mutex_unlock(&dev->mt76.mutex);
}
-
-static int mt76x0_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
-{
- struct mt76x0_dev *dev = hw->priv;
- unsigned int idx = 0;
-
- mt76x02_vif_init(&dev->mt76, vif, idx);
- return 0;
-}
-
static int mt76x0_config(struct ieee80211_hw *hw, u32 changed)
{
struct mt76x0_dev *dev = hw->priv;
.tx = mt76x0_tx,
.start = mt76x0_start,
.stop = mt76x0_stop,
- .add_interface = mt76x0_add_interface,
+ .add_interface = mt76x02_add_interface,
.remove_interface = mt76x02_remove_interface,
.config = mt76x0_config,
.configure_filter = mt76x02_configure_filter,
}
EXPORT_SYMBOL_GPL(mt76x02_vif_init);
+int
+mt76x02_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ struct mt76_dev *dev = hw->priv;
+ unsigned int idx = 0;
+
+ if (vif->addr[0] & BIT(1))
+ idx = 1 + (((dev->macaddr[0] ^ vif->addr[0]) >> 2) & 7);
+
+ /*
+ * Client mode typically only has one configurable BSSID register,
+ * which is used for bssidx=0. This is linked to the MAC address.
+ * Since mac80211 allows changing interface types, and we cannot
+ * force the use of the primary MAC address for a station mode
+ * interface, we need some other way of configuring a per-interface
+ * remote BSSID.
+ * The hardware provides an AP-Client feature, where bssidx 0-7 are
+ * used for AP mode and bssidx 8-15 for client mode.
+ * We shift the station interface bss index by 8 to force the
+ * hardware to recognize the BSSID.
+ * The resulting bssidx mismatch for unicast frames is ignored by hw.
+ */
+ if (vif->type == NL80211_IFTYPE_STATION)
+ idx += 8;
+
+ mt76x02_vif_init(dev, vif, idx);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mt76x02_add_interface);
+
void mt76x02_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
void mt76x02_vif_init(struct mt76_dev *dev, struct ieee80211_vif *vif,
unsigned int idx);
+int mt76x02_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif);
void mt76x02_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
}
static int
-mt76x2_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
-{
- struct mt76x2_dev *dev = hw->priv;
- unsigned int idx = 0;
-
- if (vif->addr[0] & BIT(1))
- idx = 1 + (((dev->mt76.macaddr[0] ^ vif->addr[0]) >> 2) & 7);
-
- /*
- * Client mode typically only has one configurable BSSID register,
- * which is used for bssidx=0. This is linked to the MAC address.
- * Since mac80211 allows changing interface types, and we cannot
- * force the use of the primary MAC address for a station mode
- * interface, we need some other way of configuring a per-interface
- * remote BSSID.
- * The hardware provides an AP-Client feature, where bssidx 0-7 are
- * used for AP mode and bssidx 8-15 for client mode.
- * We shift the station interface bss index by 8 to force the
- * hardware to recognize the BSSID.
- * The resulting bssidx mismatch for unicast frames is ignored by hw.
- */
- if (vif->type == NL80211_IFTYPE_STATION)
- idx += 8;
-
- mt76x02_vif_init(&dev->mt76, vif, idx);
- return 0;
-}
-
-static int
mt76x2_set_channel(struct mt76x2_dev *dev, struct cfg80211_chan_def *chandef)
{
int ret;
.tx = mt76x2_tx,
.start = mt76x2_start,
.stop = mt76x2_stop,
- .add_interface = mt76x2_add_interface,
+ .add_interface = mt76x02_add_interface,
.remove_interface = mt76x02_remove_interface,
.config = mt76x2_config,
.configure_filter = mt76x02_configure_filter,