Absolute paths in $ref should always begin with '/schemas'. The tools
mostly work with it omitted, but for correctness the path should be
everything except the hostname as that is taken from the schema's $id
value. This scheme is defined in the json-schema spec.
Cc: Hector Martin <marcan@marcan.st>
Cc: Sven Peter <sven@svenpeter.dev>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mukesh Savaliya <msavaliy@codeaurora.org>
Cc: Akash Asthana <akashast@codeaurora.org>
Cc: Bayi Cheng <bayi.cheng@mediatek.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: Min Guo <min.guo@mediatek.com>
Cc: netdev@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@debian.org>
Link: https://lore.kernel.org/r/20220325215652.525383-1-robh@kernel.org
description:
The individual power management domains within this controller
type: object
- $ref: /power/apple,pmgr-pwrstate.yaml#
+ $ref: /schemas/power/apple,pmgr-pwrstate.yaml#
required:
- compatible
Ethernet switch port Description
allOf:
- - $ref: "http://devicetree.org/schemas/net/ethernet-controller.yaml#"
+ - $ref: /schemas/net/ethernet-controller.yaml#
properties:
reg:
supports up to 50MHz, up to four chip selects, programmable
data path from 4 bits to 32 bits and numerous protocol
variants.
- $ref: /spi/spi-controller.yaml#
+ $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
capability of this controller.
allOf:
- - $ref: /spi/spi-controller.yaml#
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
as NOR flash.
allOf:
- - $ref: /spi/spi-controller.yaml#
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
compatibility.
allOf:
- - $ref: /spi/spi-controller.yaml#
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
default: host
connector:
- $ref: /connector/usb-connector.yaml#
+ $ref: /schemas/connector/usb-connector.yaml#
description:
Connector for dual role switch, especially for "gpio-usb-b-connector"
type: object
patternProperties:
"^usb@[0-9a-f]+$":
type: object
- $ref: /usb/mediatek,mtk-xhci.yaml#
+ $ref: /schemas/usb/mediatek,mtk-xhci.yaml#
description:
The xhci should be added as subnode to mtu3 as shown in the following
example if the host mode is enabled.
maxItems: 1
connector:
- $ref: /connector/usb-connector.yaml#
+ $ref: /schemas/connector/usb-connector.yaml#
description: Connector for dual role switch
type: object