OSDN Git Service

nvmem: imx: support i.MX93 OCOTP
authorPeng Fan <peng.fan@nxp.com>
Sun, 11 Jun 2023 14:03:25 +0000 (15:03 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Thu, 15 Jun 2023 11:42:17 +0000 (13:42 +0200)
Add i.MX93 OCOTP support. i.MX93 OCOTP has two parts: Fuse shadow
block(fsb) and fuse managed by ELE. The FSB part could be directly
accessed with MMIO, the ELE could only be accessed with ELE API.

Currently the ELE API is not ready, so NULL function callback is used,
but it was tested with downstream ELE API.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-22-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/nvmem/Kconfig
drivers/nvmem/Makefile
drivers/nvmem/imx-ocotp-ele.c [new file with mode: 0644]

index 688b70b..da9befa 100644 (file)
@@ -83,6 +83,15 @@ config NVMEM_IMX_OCOTP
          This driver can also be built as a module. If so, the module
          will be called nvmem-imx-ocotp.
 
+config NVMEM_IMX_OCOTP_ELE
+       tristate "i.MX On-Chip OTP Controller support"
+       depends on ARCH_MXC || COMPILE_TEST
+       depends on HAS_IOMEM
+       depends on OF
+       help
+         This is a driver for the On-Chip OTP Controller (OCOTP)
+         available on i.MX SoCs which has ELE.
+
 config NVMEM_IMX_OCOTP_SCU
        tristate "i.MX8 SCU On-Chip OTP Controller support"
        depends on IMX_SCU
index f82431e..cc23ce4 100644 (file)
@@ -18,6 +18,8 @@ obj-$(CONFIG_NVMEM_IMX_IIM)           += nvmem-imx-iim.o
 nvmem-imx-iim-y                                := imx-iim.o
 obj-$(CONFIG_NVMEM_IMX_OCOTP)          += nvmem-imx-ocotp.o
 nvmem-imx-ocotp-y                      := imx-ocotp.o
+obj-$(CONFIG_NVMEM_IMX_OCOTP_ELE)      += nvmem-imx-ocotp-ele.o
+nvmem-imx-ocotp-ele-y                  := imx-ocotp-ele.o
 obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU)      += nvmem-imx-ocotp-scu.o
 nvmem-imx-ocotp-scu-y                  := imx-ocotp-scu.o
 obj-$(CONFIG_NVMEM_JZ4780_EFUSE)       += nvmem_jz4780_efuse.o
diff --git a/drivers/nvmem/imx-ocotp-ele.c b/drivers/nvmem/imx-ocotp-ele.c
new file mode 100644 (file)
index 0000000..f1cbbc9
--- /dev/null
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * i.MX9 OCOTP fusebox driver
+ *
+ * Copyright 2023 NXP
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+enum fuse_type {
+       FUSE_FSB = 1,
+       FUSE_ELE = 2,
+       FUSE_INVALID = -1
+};
+
+struct ocotp_map_entry {
+       u32 start; /* start word */
+       u32 num; /* num words */
+       enum fuse_type type;
+};
+
+struct ocotp_devtype_data {
+       u32 reg_off;
+       char *name;
+       u32 size;
+       u32 num_entry;
+       u32 flag;
+       nvmem_reg_read_t reg_read;
+       struct ocotp_map_entry entry[];
+};
+
+struct imx_ocotp_priv {
+       struct device *dev;
+       void __iomem *base;
+       struct nvmem_config config;
+       struct mutex lock;
+       const struct ocotp_devtype_data *data;
+};
+
+static enum fuse_type imx_ocotp_fuse_type(void *context, u32 index)
+{
+       struct imx_ocotp_priv *priv = context;
+       const struct ocotp_devtype_data *data = priv->data;
+       u32 start, end;
+       int i;
+
+       for (i = 0; i < data->num_entry; i++) {
+               start = data->entry[i].start;
+               end = data->entry[i].start + data->entry[i].num;
+
+               if (index >= start && index < end)
+                       return data->entry[i].type;
+       }
+
+       return FUSE_INVALID;
+}
+
+static int imx_ocotp_reg_read(void *context, unsigned int offset, void *val, size_t bytes)
+{
+       struct imx_ocotp_priv *priv = context;
+       void __iomem *reg = priv->base + priv->data->reg_off;
+       u32 count, index, num_bytes;
+       enum fuse_type type;
+       u32 *buf;
+       void *p;
+       int i;
+
+       index = offset;
+       num_bytes = round_up(bytes, 4);
+       count = num_bytes >> 2;
+
+       if (count > ((priv->data->size >> 2) - index))
+               count = (priv->data->size >> 2) - index;
+
+       p = kzalloc(num_bytes, GFP_KERNEL);
+       if (!p)
+               return -ENOMEM;
+
+       mutex_lock(&priv->lock);
+
+       buf = p;
+
+       for (i = index; i < (index + count); i++) {
+               type = imx_ocotp_fuse_type(context, i);
+               if (type == FUSE_INVALID || type == FUSE_ELE) {
+                       *buf++ = 0;
+                       continue;
+               }
+
+               *buf++ = readl_relaxed(reg + (i << 2));
+       }
+
+       memcpy(val, (u8 *)p, bytes);
+
+       mutex_unlock(&priv->lock);
+
+       kfree(p);
+
+       return 0;
+};
+
+static int imx_ele_ocotp_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct imx_ocotp_priv *priv;
+       struct nvmem_device *nvmem;
+
+       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+       if (!priv)
+               return -ENOMEM;
+
+       priv->data = of_device_get_match_data(dev);
+
+       priv->base = devm_platform_ioremap_resource(pdev, 0);
+       if (IS_ERR(priv->base))
+               return PTR_ERR(priv->base);
+
+       priv->config.dev = dev;
+       priv->config.name = "ELE-OCOTP";
+       priv->config.id = NVMEM_DEVID_AUTO;
+       priv->config.owner = THIS_MODULE;
+       priv->config.size = priv->data->size;
+       priv->config.reg_read = priv->data->reg_read;
+       priv->config.word_size = 4;
+       priv->config.stride = 1;
+       priv->config.priv = priv;
+       priv->config.read_only = true;
+       mutex_init(&priv->lock);
+
+       nvmem = devm_nvmem_register(dev, &priv->config);
+       if (IS_ERR(nvmem))
+               return PTR_ERR(nvmem);
+
+       return 0;
+}
+
+static const struct ocotp_devtype_data imx93_ocotp_data = {
+       .reg_off = 0x8000,
+       .reg_read = imx_ocotp_reg_read,
+       .size = 2048,
+       .num_entry = 6,
+       .entry = {
+               { 0, 52, FUSE_FSB },
+               { 63, 1, FUSE_ELE},
+               { 128, 16, FUSE_ELE },
+               { 182, 1, FUSE_ELE },
+               { 188, 1, FUSE_ELE },
+               { 312, 200, FUSE_FSB }
+       },
+};
+
+static const struct of_device_id imx_ele_ocotp_dt_ids[] = {
+       { .compatible = "fsl,imx93-ocotp", .data = &imx93_ocotp_data, },
+       {},
+};
+MODULE_DEVICE_TABLE(of, imx_ele_ocotp_dt_ids);
+
+static struct platform_driver imx_ele_ocotp_driver = {
+       .driver = {
+               .name = "imx_ele_ocotp",
+               .of_match_table = imx_ele_ocotp_dt_ids,
+       },
+       .probe = imx_ele_ocotp_probe,
+};
+module_platform_driver(imx_ele_ocotp_driver);
+
+MODULE_DESCRIPTION("i.MX OCOTP/ELE driver");
+MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
+MODULE_LICENSE("GPL");