arm64: dts: qcom: sm6350: Add USB1 nodes

Add nodes required for USB1 to function. SM6350 (thankfully) resuses SDM845 and
SC7180 IP, so no additional code porting is required.

Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Renamed dwc3 node "usb"]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210923162204.21752-7-konrad.dybcio@somainline.org

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 68de0be..e01a2b5 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -388,12 +388,113 @@
                        #hwlock-cells = <1>;
                };
 
+               usb_1_hsphy: phy@88e3000 {
+                       compatible = "qcom,sm6350-qusb2-phy", "qcom,qusb2-v2-phy";
+                       reg = <0 0x088e3000 0 0x400>;
+                       status = "disabled";
+                       #phy-cells = <0>;
+
+                       clocks = <&xo_board>, <&rpmhcc RPMH_CXO_CLK>;
+                       clock-names = "cfg_ahb", "ref";
+
+                       resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+               };
+
+               usb_1_qmpphy: phy@88e9000 {
+                       compatible = "qcom,sc7180-qmp-usb3-dp-phy";
+                       reg = <0 0x088e9000 0 0x200>,
+                             <0 0x088e8000 0 0x40>,
+                             <0 0x088ea000 0 0x200>;
+                       status = "disabled";
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+                                <&rpmhcc RPMH_QLINK_CLK>,
+                                <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+                                <&xo_board>;
+                       clock-names = "aux", "ref", "com_aux", "cfg_ahb";
+
+                       resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+                                <&gcc GCC_USB3_PHY_PRIM_BCR>;
+                       reset-names = "phy", "common";
+
+                       usb_1_ssphy: usb3-phy@88e9200 {
+                               reg = <0 0x088e9200 0 0x200>,
+                                     <0 0x088e9400 0 0x200>,
+                                     <0 0x088e9c00 0 0x400>,
+                                     <0 0x088e9600 0 0x200>,
+                                     <0 0x088e9800 0 0x200>,
+                                     <0 0x088e9a00 0 0x100>;
+                               #clock-cells = <0>;
+                               #phy-cells = <0>;
+                               clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+                               clock-names = "pipe0";
+                               clock-output-names = "usb3_phy_pipe_clk_src";
+                       };
+
+                       dp_phy: dp-phy@88ea200 {
+                               reg = <0 0x088ea200 0 0x200>,
+                                     <0 0x088ea400 0 0x200>,
+                                     <0 0x088eac00 0 0x400>,
+                                     <0 0x088ea600 0 0x200>,
+                                     <0 0x088ea800 0 0x200>,
+                                     <0 0x088eaa00 0 0x100>;
+                               #phy-cells = <0>;
+                               #clock-cells = <1>;
+                               clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+                               clock-names = "pipe0";
+                               clock-output-names = "usb3_phy_pipe_clk_src";
+                       };
+               };
+
                system-cache-controller@9200000 {
                        compatible = "qcom,sm6350-llcc";
                        reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
                        reg-names = "llcc_base", "llcc_broadcast_base";
                };
 
+               usb_1: usb@a6f8800 {
+                       compatible = "qcom,sm6350-dwc3", "qcom,dwc3";
+                       reg = <0 0x0a6f8800 0 0x400>;
+                       status = "disabled";
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+                                <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+                                <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+                                <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+                                <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+                       clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+                                     "sleep";
+
+                       interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+                                             <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+                                             <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+                                         "dm_hs_phy_irq", "ss_phy_irq";
+
+                       power-domains = <&gcc USB30_PRIM_GDSC>;
+
+                       resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+                       usb_1_dwc3: usb@a600000 {
+                               compatible = "snps,dwc3";
+                               reg = <0 0x0a600000 0 0xcd00>;
+                               interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+                               snps,dis_u2_susphy_quirk;
+                               snps,dis_enblslpm_quirk;
+                               snps,has-lpm-erratum;
+                               snps,hird-threshold = /bits/ 8 <0x10>;
+                               phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+                               phy-names = "usb2-phy", "usb3-phy";
+                       };
+               };
+
                pdc: interrupt-controller@b220000 {
                        compatible = "qcom,sm6350-pdc", "qcom,pdc";
                        reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;