* gdb.base/callfuncs.exp: Make all test names unique.
* gdb.base/commands.exp: Make all test names unique.
* gdb.base/condbreak.exp: Make all test names unique.
* gdb.base/dbx.exp: Make all test names unique.
* gdb.base/default.exp: Make all test names unique.
* gdb.base/define.exp: Make all test names unique. Conform some FAIL
and TIMEOUT messages to their corresponding PASS message.
* gdb.base/ending-run.exp: Make all test names unique.
* gdb.base/long_long.exp: Remove duplicate test.
+2001-05-19 Michael Chastain <chastain@redhat.com>
+
+ * gdb.base/callfuncs.exp: Make all test names unique.
+ * gdb.base/commands.exp: Make all test names unique.
+ * gdb.base/condbreak.exp: Make all test names unique.
+ * gdb.base/dbx.exp: Make all test names unique.
+ * gdb.base/default.exp: Make all test names unique.
+ * gdb.base/define.exp: Make all test names unique. Conform some FAIL
+ and TIMEOUT messages to their corresponding PASS message.
+ * gdb.base/ending-run.exp: Make all test names unique.
+ * gdb.base/long_long.exp: Remove duplicate test.
+
2001-05-21 Kevin Buettner <kevinb@redhat.com>
* gdb.base/finish.exp (finish_void): Allow "finish" command to
# Make sure that malloc gets called and that the floating point unit
# is initialized via a call to t_double_values.
-gdb_test "next" "t_double_values\\(double_val1, double_val2\\);.*"
-gdb_test "next" "t_structs_c\\(struct_val1\\);.*"
+gdb_test "next" "t_double_values\\(double_val1, double_val2\\);.*" \
+ "next to t_double_values"
+gdb_test "next" "t_structs_c\\(struct_val1\\);.*" \
+ "next to t_structs_c"
# Save all register contents.
do_get_all_registers
return
}
- gdb_test "set args 6" "" "set args in progvar_simple_while_test"
+ gdb_test "set args 6" "" "set args in infrun_breakpoint_command_test"
if { ![runto factorial] } then { gdb_suppress_tests }
# Don't depend upon argument passing, since most simulators don't
# currently support it. Bash value variable to be what we want.
}
send_gdb "end\n"
gdb_expect {
- -re "$gdb_prompt $" {pass "begin commands on watch"}
- timeout {fail "(timeout) begin commands on watch"}
+ -re "$gdb_prompt $" {pass "end commands on watch"}
+ timeout {fail "(timeout) end commands on watch"}
}
send_gdb "continue\n"
gdb_expect {
# Don't depend upon argument passing, since most simulators don't
# currently support it. Bash value variable to be what we want.
delete_breakpoints
- gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #2"
+ gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #3"
gdb_test "p value=5" "" "set value to 5 in test_command_prompt_position"
# All this test should do is print 0xdeadbeef once.
gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
proc deprecated_command_test {} {
gdb_test "maintenance deprecate blah" "Can't find command.*" \
- "tried to deprecate non-existsing command"
+ "tried to deprecate non-existing command"
- gdb_test "maintenance deprecate p \"new_p\"" ""
+ gdb_test "maintenance deprecate p \"new_p\"" "" "maintenance deprecate p \"new_p\" /1/"
gdb_test "p 5" \
"Warning: 'p', an alias for the command 'print' is deprecated.*Use 'new_p'.*" \
"p deprecated warning, with replacement"
- gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away"
+ gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /1/"
- gdb_test "maintenance deprecate p \"new_p\"" ""
+ gdb_test "maintenance deprecate p \"new_p\"" "" "maintenance deprecate p \"new_p\" /2/"
gdb_test "maintenance deprecate print \"new_print\"" ""
gdb_test "p 5" \
"Warning: command 'print' \\(p\\) is deprecated.*Use 'new_print'.*" \
"both alias and command are deprecated"
- gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away"
+ gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /2/"
gdb_test "maintenance deprecate set remote memory-read-packet-size \"srm\" " \
"" \
- "deprecate long comamnd"
+ "deprecate long command /1/"
gdb_test "set remote memory-read-packet-size" \
"Warning: command 'set remote memory-read-packet-size' is deprecated.*Use 'srm'.*" \
- "long command deprecated"
+ "long command deprecated /1/"
gdb_test "maintenance deprecate set remote memory-read-packet-size" \
"" \
- "deprecate long comamnd"
+ "deprecate long command /2/"
gdb_test "set remote memory-read-packet-size" \
"Warning: command 'set remote memory-read-packet-size' is deprecated.*No alternative known.*" \
- "long command deprecated with no alternative."
+ "long command deprecated with no alternative /2/"
gdb_test "maintenance deprecate" \
"\"maintenance deprecate\".*" \
-# Copyright 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
+# Copyright 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# test conditional break at function
#
gdb_test "break marker1 if 1==1" \
- "Breakpoint.*at.* file .*$srcfile, line.*" \
- "break function if condition"
+ "Breakpoint.*at.* file .*$srcfile, line.*"
-gdb_test "delete 2" \
- "" \
- "delete break"
+gdb_test "delete 2" ""
#
# test conditional break at line number
#
gdb_test "break 79 if 1==1" \
- "Breakpoint.*at.* file .*$srcfile, line 79\\." \
- "break line if condition"
+ "Breakpoint.*at.* file .*$srcfile, line 79\\."
-gdb_test "delete 3" \
- "" \
- "delete break"
+gdb_test "delete 3" ""
#
# test conditional break at function
#
gdb_test "break marker1 if (1==1)" \
- "Breakpoint.*at.* file .*$srcfile, line.*" \
- "break function if (condition)"
+ "Breakpoint.*at.* file .*$srcfile, line.*"
#
# test conditional break at line number
#
gdb_test "break 79 if (1==1)" \
- "Breakpoint.*at.* file .*$srcfile, line 79\\." \
- "break line if (condition)"
+ "Breakpoint.*at.* file .*$srcfile, line 79\\."
gdb_test "break marker2 if (a==43)" \
- "Breakpoint.*at.* file .*$srcfile, line.*" \
- "break function if (condition)"
+ "Breakpoint.*at.* file .*$srcfile, line.*"
#
# check to see what breakpoints are set
-# Copyright 1998, 1999 Free Software Foundation, Inc.
+# Copyright 1998, 1999, 2001 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
#test_func
#
proc test_func { } {
- gdb_test "cont" ""
+ gdb_test "cont" "" "cont 1"
gdb_test "step" ""
# This always fails, but it's not clear why. -sts 1999-08-17
setup_xfail "*-*-*"
gdb_test "func sum" "'sum' not within current stack frame\."
gdb_test "stop in sum" "Breakpoint.*at.*: file.*sum\.c, line 11\."
- gdb_test "cont"
+ gdb_test "cont" "" "cont 2"
# This always fails, but it's not clear why. -sts 1999-08-17
setup_xfail "*-*-*"
gdb_test "func print_average" ".*in print_average.*\\(list=.*, low=0, high=6\\).*at.*average\.c:24\r\n24\[ \t\]+total = sum\\(list, low, high\\);"
# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000
+# 2000, 2001
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
gdb_test "info stack" "No stack." "info stack"
#test info set
# FIXME -- needs to match the entire output
+# FIXME -- on native solaris 2.8, this test fails due to this line:
+# prompt: Gdb's prompt is "(gdb) ".^M
gdb_test "info set" "confirm: Whether to confirm potentially dangerous operations is o\[a-z\]*..*\[\r\n\]+history filename: The filename in which to record the command history is .*\[\r\n\]+listsize: Number of source lines gdb will list by default is 10.*" "info set"
gdb_test "info symbol" "Argument required .address.."
#test info source
gdb_test "overlay off" ""
gdb_test "overlay list" "No sections are mapped."
gdb_test "overlay map" "Overlay debugging not enabled.*" "overlay map #1"
-gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #2"
+gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #1"
gdb_test "overlay manual" "" "overlay manual #2"
gdb_test "overlay map" "Argument required: name of an overlay section." "overlay map #2"
gdb_test "overlay unmap" "Argument required: name of an overlay section." "overlay unmap #2"
-# Copyright 1998, 1999 Free Software Foundation, Inc.
+# Copyright 1998, 1999, 2001 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
}
}
-re "$gdb_prompt $"\
- {fail "documenting user command: nextwhere"}
- timeout {fail "(timeout) documenting user command: nextwhere"}
+ {fail "document user command: nextwhere"}
+ timeout {fail "(timeout) document user command: nextwhere"}
}
send_gdb "document nextwhere\n"
{send_gdb "A next command that first shows you where you're stepping from.\nend\n"
gdb_expect {
-re "$gdb_prompt $"\
- {pass "document user command: nextwhere"}
- timeout {fail "(timeout) document user command: nextwhere"}
+ {pass "re-document user command: nextwhere"}
+ timeout {fail "(timeout) re-document user command: nextwhere"}
}
}
-re "$gdb_prompt $"\
- {fail "documenting user command: nextwhere"}
- timeout {fail "(timeout) documenting user command: nextwhere"}
+ {fail "re-document user command: nextwhere"}
+ timeout {fail "(timeout) re-document user command: nextwhere"}
}
send_gdb "help nextwhere\n"
"bpt at line before routine"
gdb_test "b ending-run.c:13" \
- ".*Note.*also.*Breakpoint 2.*ending-run.c, line 13.*"
+ ".*Note.*also.*Breakpoint 2.*ending-run.c, line 13.*" \
+ "b ending-run.c:13, one"
# Set up to go to the next-to-last line of the program
#
# Test some other "clear" combinations
#
gdb_test "b ending-run.c:1" ".*Breakpoint.*4.*"
-gdb_test "b ending-run.c:13" ".*Note.*also.*Breakpoint.*5.*"
+gdb_test "b ending-run.c:13" ".*Note.*also.*Breakpoint.*5.*" "b ending-run.c:13, two"
gdb_test "cle ending-run.c:13" \
".*Deleted breakpoint 5.*" "Only cleared 1 by line"
gdb_test "p/t *(short *)&oct" ".*1010011100101110.*"
gdb_test "p/a *(short *)&oct" ".*0xf*ffffa72e.*"
gdb_test "p/c *(short *)&oct" ".* 46 '.'.*"
- gdb_test "p/a *(short *)&oct" ".*0xf*ffffa72e.*"
gdb_test "p/f *(short *)&oct" ".*-22738.*"
gdb_test "x/x &oct" ".*0xa72ee539.*"
OSDN Git Service
