* @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed,
* note that this is only called when it changes after the channel
* context had been assigned.
+ * @BSS_CHANGED_OCB: OCB join status changed
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
BSS_CHANGED_P2P_PS = 1<<19,
BSS_CHANGED_BEACON_INFO = 1<<20,
BSS_CHANGED_BANDWIDTH = 1<<21,
+ BSS_CHANGED_OCB = 1<<22,
/* when adding here, make sure to change ieee80211_reconfig */
};
Do not select this option.
+config MAC80211_OCB_DEBUG
+ bool "Verbose OCB debugging"
+ depends on MAC80211_DEBUG_MENU
+ ---help---
+ Selecting this option causes mac80211 to print out
+ very verbose OCB debugging messages. It should not
+ be selected on production systems as those messages
+ are remotely triggerable.
+
+ Do not select this option.
+
config MAC80211_IBSS_DEBUG
bool "Verbose IBSS debugging"
depends on MAC80211_DEBUG_MENU
event.o \
chan.o \
trace.o mlme.o \
- tdls.o
+ tdls.o \
+ ocb.o
mac80211-$(CONFIG_MAC80211_LEDS) += led.o
mac80211-$(CONFIG_MAC80211_DEBUGFS) += \
return ieee80211_ibss_leave(IEEE80211_DEV_TO_SUB_IF(dev));
}
+static int ieee80211_join_ocb(struct wiphy *wiphy, struct net_device *dev,
+ struct ocb_setup *setup)
+{
+ return ieee80211_ocb_join(IEEE80211_DEV_TO_SUB_IF(dev), setup);
+}
+
+static int ieee80211_leave_ocb(struct wiphy *wiphy, struct net_device *dev)
+{
+ return ieee80211_ocb_leave(IEEE80211_DEV_TO_SUB_IF(dev));
+}
+
static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev,
int rate[IEEE80211_NUM_BANDS])
{
.join_mesh = ieee80211_join_mesh,
.leave_mesh = ieee80211_leave_mesh,
#endif
+ .join_ocb = ieee80211_join_ocb,
+ .leave_ocb = ieee80211_leave_ocb,
.change_bss = ieee80211_change_bss,
.set_txq_params = ieee80211_set_txq_params,
.set_monitor_channel = ieee80211_set_monitor_channel,
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_OCB:
break;
default:
WARN_ON_ONCE(1);
#define __MAC80211_DEBUG_H
#include <net/cfg80211.h>
+#ifdef CONFIG_MAC80211_OCB_DEBUG
+#define MAC80211_OCB_DEBUG 1
+#else
+#define MAC80211_OCB_DEBUG 0
+#endif
+
#ifdef CONFIG_MAC80211_IBSS_DEBUG
#define MAC80211_IBSS_DEBUG 1
#else
_sdata_dbg(MAC80211_HT_DEBUG && net_ratelimit(), \
sdata, fmt, ##__VA_ARGS__)
+#define ocb_dbg(sdata, fmt, ...) \
+ _sdata_dbg(MAC80211_OCB_DEBUG, \
+ sdata, fmt, ##__VA_ARGS__)
+
#define ibss_dbg(sdata, fmt, ...) \
_sdata_dbg(MAC80211_IBSS_DEBUG, \
sdata, fmt, ##__VA_ARGS__)
BSS_CHANGED_BEACON_ENABLED) &&
sdata->vif.type != NL80211_IFTYPE_AP &&
sdata->vif.type != NL80211_IFTYPE_ADHOC &&
- sdata->vif.type != NL80211_IFTYPE_MESH_POINT))
+ sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
+ sdata->vif.type != NL80211_IFTYPE_OCB))
return;
if (WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE ||
};
/**
+ * struct ieee80211_if_ocb - OCB mode state
+ *
+ * @housekeeping_timer: timer for periodic invocation of a housekeeping task
+ * @wrkq_flags: OCB deferred task action
+ * @incomplete_lock: delayed STA insertion lock
+ * @incomplete_stations: list of STAs waiting for delayed insertion
+ * @joined: indication if the interface is connected to an OCB network
+ */
+struct ieee80211_if_ocb {
+ struct timer_list housekeeping_timer;
+ unsigned long wrkq_flags;
+
+ spinlock_t incomplete_lock;
+ struct list_head incomplete_stations;
+
+ bool joined;
+};
+
+/**
* struct ieee80211_mesh_sync_ops - Extensible synchronization framework interface
*
* these declarations define the interface, which enables
struct ieee80211_if_managed mgd;
struct ieee80211_if_ibss ibss;
struct ieee80211_if_mesh mesh;
+ struct ieee80211_if_ocb ocb;
u32 mntr_flags;
} u;
int ieee80211_ibss_finish_csa(struct ieee80211_sub_if_data *sdata);
void ieee80211_ibss_stop(struct ieee80211_sub_if_data *sdata);
+/* OCB code */
+void ieee80211_ocb_work(struct ieee80211_sub_if_data *sdata);
+void ieee80211_ocb_rx_no_sta(struct ieee80211_sub_if_data *sdata,
+ const u8 *bssid, const u8 *addr, u32 supp_rates);
+void ieee80211_ocb_setup_sdata(struct ieee80211_sub_if_data *sdata);
+int ieee80211_ocb_join(struct ieee80211_sub_if_data *sdata,
+ struct ocb_setup *setup);
+int ieee80211_ocb_leave(struct ieee80211_sub_if_data *sdata);
+
/* mesh code */
void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata);
void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
list_for_each_entry(nsdata, &local->interfaces, list) {
if (nsdata != sdata && ieee80211_sdata_running(nsdata)) {
/*
+ * Only OCB and monitor mode may coexist
+ */
+ if ((sdata->vif.type == NL80211_IFTYPE_OCB &&
+ nsdata->vif.type != NL80211_IFTYPE_MONITOR) ||
+ (sdata->vif.type != NL80211_IFTYPE_MONITOR &&
+ nsdata->vif.type == NL80211_IFTYPE_OCB))
+ return -EBUSY;
+
+ /*
* Allow only a single IBSS interface to be up at any
* time. This is restricted because beacon distribution
* cannot work properly if both are in the same IBSS.
break;
ieee80211_mesh_work(sdata);
break;
+ case NL80211_IFTYPE_OCB:
+ ieee80211_ocb_work(sdata);
+ break;
default:
break;
}
static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type)
{
+ static const u8 bssid_wildcard[ETH_ALEN] = {0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff};
+
/* clear type-dependent union */
memset(&sdata->u, 0, sizeof(sdata->u));
ieee80211_sta_setup_sdata(sdata);
break;
case NL80211_IFTYPE_OCB:
- /* to be implemented in the future */
+ sdata->vif.bss_conf.bssid = bssid_wildcard;
+ ieee80211_ocb_setup_sdata(sdata);
break;
case NL80211_IFTYPE_ADHOC:
sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_OCB:
/*
* Could maybe also all others here?
* Just not sure how that interacts
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_OCB:
/*
* Could probably support everything
* but WDS here (WDS do_open can fail
--- /dev/null
+/*
+ * OCB mode implementation
+ *
+ * Copyright: (c) 2014 Czech Technical University in Prague
+ * (c) 2014 Volkswagen Group Research
+ * Author: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz>
+ * Funded by: Volkswagen Group Research
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <net/mac80211.h>
+#include <asm/unaligned.h>
+
+#include "ieee80211_i.h"
+#include "driver-ops.h"
+#include "rate.h"
+
+#define IEEE80211_OCB_HOUSEKEEPING_INTERVAL (60 * HZ)
+#define IEEE80211_OCB_PEER_INACTIVITY_LIMIT (240 * HZ)
+#define IEEE80211_OCB_MAX_STA_ENTRIES 128
+
+/**
+ * enum ocb_deferred_task_flags - mac80211 OCB deferred tasks
+ * @OCB_WORK_HOUSEKEEPING: run the periodic OCB housekeeping tasks
+ *
+ * These flags are used in @wrkq_flags field of &struct ieee80211_if_ocb
+ */
+enum ocb_deferred_task_flags {
+ OCB_WORK_HOUSEKEEPING,
+};
+
+void ieee80211_ocb_rx_no_sta(struct ieee80211_sub_if_data *sdata,
+ const u8 *bssid, const u8 *addr,
+ u32 supp_rates)
+{
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_chanctx_conf *chanctx_conf;
+ struct ieee80211_supported_band *sband;
+ enum nl80211_bss_scan_width scan_width;
+ struct sta_info *sta;
+ int band;
+
+ /* XXX: Consider removing the least recently used entry and
+ * allow new one to be added.
+ */
+ if (local->num_sta >= IEEE80211_OCB_MAX_STA_ENTRIES) {
+ net_info_ratelimited("%s: No room for a new OCB STA entry %pM\n",
+ sdata->name, addr);
+ return;
+ }
+
+ ocb_dbg(sdata, "Adding new OCB station %pM\n", addr);
+
+ rcu_read_lock();
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (WARN_ON_ONCE(!chanctx_conf)) {
+ rcu_read_unlock();
+ return;
+ }
+ band = chanctx_conf->def.chan->band;
+ scan_width = cfg80211_chandef_to_scan_width(&chanctx_conf->def);
+ rcu_read_unlock();
+
+ sta = sta_info_alloc(sdata, addr, GFP_ATOMIC);
+ if (!sta)
+ return;
+
+ sta->last_rx = jiffies;
+
+ /* Add only mandatory rates for now */
+ sband = local->hw.wiphy->bands[band];
+ sta->sta.supp_rates[band] =
+ ieee80211_mandatory_rates(sband, scan_width);
+
+ spin_lock(&ifocb->incomplete_lock);
+ list_add(&sta->list, &ifocb->incomplete_stations);
+ spin_unlock(&ifocb->incomplete_lock);
+ ieee80211_queue_work(&local->hw, &sdata->work);
+}
+
+static struct sta_info *ieee80211_ocb_finish_sta(struct sta_info *sta)
+ __acquires(RCU)
+{
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ u8 addr[ETH_ALEN];
+
+ memcpy(addr, sta->sta.addr, ETH_ALEN);
+
+ ocb_dbg(sdata, "Adding new IBSS station %pM (dev=%s)\n",
+ addr, sdata->name);
+
+ sta_info_move_state(sta, IEEE80211_STA_AUTH);
+ sta_info_move_state(sta, IEEE80211_STA_ASSOC);
+ sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
+
+ rate_control_rate_init(sta);
+
+ /* If it fails, maybe we raced another insertion? */
+ if (sta_info_insert_rcu(sta))
+ return sta_info_get(sdata, addr);
+ return sta;
+}
+
+static void ieee80211_ocb_housekeeping(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+
+ ocb_dbg(sdata, "Running ocb housekeeping\n");
+
+ ieee80211_sta_expire(sdata, IEEE80211_OCB_PEER_INACTIVITY_LIMIT);
+
+ mod_timer(&ifocb->housekeeping_timer,
+ round_jiffies(jiffies + IEEE80211_OCB_HOUSEKEEPING_INTERVAL));
+}
+
+void ieee80211_ocb_work(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+ struct sta_info *sta;
+
+ if (ifocb->joined != true)
+ return;
+
+ sdata_lock(sdata);
+
+ spin_lock_bh(&ifocb->incomplete_lock);
+ while (!list_empty(&ifocb->incomplete_stations)) {
+ sta = list_first_entry(&ifocb->incomplete_stations,
+ struct sta_info, list);
+ list_del(&sta->list);
+ spin_unlock_bh(&ifocb->incomplete_lock);
+
+ ieee80211_ocb_finish_sta(sta);
+ rcu_read_unlock();
+ spin_lock_bh(&ifocb->incomplete_lock);
+ }
+ spin_unlock_bh(&ifocb->incomplete_lock);
+
+ if (test_and_clear_bit(OCB_WORK_HOUSEKEEPING, &ifocb->wrkq_flags))
+ ieee80211_ocb_housekeeping(sdata);
+
+ sdata_unlock(sdata);
+}
+
+static void ieee80211_ocb_housekeeping_timer(unsigned long data)
+{
+ struct ieee80211_sub_if_data *sdata = (void *)data;
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+
+ set_bit(OCB_WORK_HOUSEKEEPING, &ifocb->wrkq_flags);
+
+ ieee80211_queue_work(&local->hw, &sdata->work);
+}
+
+void ieee80211_ocb_setup_sdata(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+
+ setup_timer(&ifocb->housekeeping_timer,
+ ieee80211_ocb_housekeeping_timer,
+ (unsigned long)sdata);
+ INIT_LIST_HEAD(&ifocb->incomplete_stations);
+ spin_lock_init(&ifocb->incomplete_lock);
+}
+
+int ieee80211_ocb_join(struct ieee80211_sub_if_data *sdata,
+ struct ocb_setup *setup)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+ u32 changed = BSS_CHANGED_OCB;
+ int err;
+
+ if (ifocb->joined == true)
+ return -EINVAL;
+
+ sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
+ sdata->smps_mode = IEEE80211_SMPS_OFF;
+ sdata->needed_rx_chains = sdata->local->rx_chains;
+
+ mutex_lock(&sdata->local->mtx);
+ err = ieee80211_vif_use_channel(sdata, &setup->chandef,
+ IEEE80211_CHANCTX_SHARED);
+ mutex_unlock(&sdata->local->mtx);
+ if (err)
+ return err;
+
+ ieee80211_bss_info_change_notify(sdata, changed);
+
+ ifocb->joined = true;
+
+ set_bit(OCB_WORK_HOUSEKEEPING, &ifocb->wrkq_flags);
+ ieee80211_queue_work(&local->hw, &sdata->work);
+
+ netif_carrier_on(sdata->dev);
+ return 0;
+}
+
+int ieee80211_ocb_leave(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+ struct ieee80211_local *local = sdata->local;
+ struct sta_info *sta;
+
+ ifocb->joined = false;
+ sta_info_flush(sdata);
+
+ spin_lock_bh(&ifocb->incomplete_lock);
+ while (!list_empty(&ifocb->incomplete_stations)) {
+ sta = list_first_entry(&ifocb->incomplete_stations,
+ struct sta_info, list);
+ list_del(&sta->list);
+ spin_unlock_bh(&ifocb->incomplete_lock);
+
+ sta_info_free(local, sta);
+ spin_lock_bh(&ifocb->incomplete_lock);
+ }
+ spin_unlock_bh(&ifocb->incomplete_lock);
+
+ netif_carrier_off(sdata->dev);
+ clear_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_OCB);
+
+ mutex_lock(&sdata->local->mtx);
+ ieee80211_vif_release_channel(sdata);
+ mutex_unlock(&sdata->local->mtx);
+
+ skb_queue_purge(&sdata->skb_queue);
+
+ del_timer_sync(&sdata->u.ocb.housekeeping_timer);
+ /* If the timer fired while we waited for it, it will have
+ * requeued the work. Now the work will be running again
+ * but will not rearm the timer again because it checks
+ * whether we are connected to the network or not -- at this
+ * point we shouldn't be anymore.
+ */
+
+ return 0;
+}
ieee80211_is_pspoll(hdr->frame_control)) &&
rx->sdata->vif.type != NL80211_IFTYPE_ADHOC &&
rx->sdata->vif.type != NL80211_IFTYPE_WDS &&
+ rx->sdata->vif.type != NL80211_IFTYPE_OCB &&
(!rx->sta || !test_sta_flag(rx->sta, WLAN_STA_ASSOC)))) {
/*
* accept port control frames from the AP even when it's not
sta->last_rx_rate_vht_nss = status->vht_nss;
}
}
+ } else if (rx->sdata->vif.type == NL80211_IFTYPE_OCB) {
+ u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len,
+ NL80211_IFTYPE_OCB);
+ /* OCB uses wild-card BSSID */
+ if (is_broadcast_ether_addr(bssid))
+ sta->last_rx = jiffies;
} else if (!is_multicast_ether_addr(hdr->addr1)) {
/*
* Mesh beacons will update last_rx when if they are found to
if (!ieee80211_vif_is_mesh(&sdata->vif) &&
sdata->vif.type != NL80211_IFTYPE_ADHOC &&
+ sdata->vif.type != NL80211_IFTYPE_OCB &&
sdata->vif.type != NL80211_IFTYPE_STATION)
return RX_DROP_MONITOR;
BIT(rate_idx));
}
break;
+ case NL80211_IFTYPE_OCB:
+ if (!bssid)
+ return false;
+ if (ieee80211_is_beacon(hdr->frame_control)) {
+ return false;
+ } else if (!is_broadcast_ether_addr(bssid)) {
+ ocb_dbg(sdata, "BSSID mismatch in OCB mode!\n");
+ return false;
+ } else if (!multicast &&
+ !ether_addr_equal(sdata->dev->dev_addr,
+ hdr->addr1)) {
+ /* if we are in promisc mode we also accept
+ * packets not destined for us
+ */
+ if (!(sdata->dev->flags & IFF_PROMISC))
+ return false;
+ rx->flags &= ~IEEE80211_RX_RA_MATCH;
+ } else if (!rx->sta) {
+ int rate_idx;
+ if (status->flag & RX_FLAG_HT)
+ rate_idx = 0; /* TODO: HT rates */
+ else
+ rate_idx = status->rate_idx;
+ ieee80211_ocb_rx_no_sta(sdata, bssid, hdr->addr2,
+ BIT(rate_idx));
+ }
+ break;
case NL80211_IFTYPE_MESH_POINT:
if (!multicast &&
!ether_addr_equal(sdata->vif.addr, hdr->addr1)) {
*/
return TX_DROP;
+ if (tx->sdata->vif.type == NL80211_IFTYPE_OCB)
+ return TX_CONTINUE;
+
if (tx->sdata->vif.type == NL80211_IFTYPE_WDS)
return TX_CONTINUE;
goto fail_rcu;
band = chanctx_conf->def.chan->band;
break;
+ case NL80211_IFTYPE_OCB:
+ /* DA SA BSSID */
+ memcpy(hdr.addr1, skb->data, ETH_ALEN);
+ memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
+ eth_broadcast_addr(hdr.addr3);
+ hdrlen = 24;
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (!chanctx_conf)
+ goto fail_rcu;
+ band = chanctx_conf->def.chan->band;
+ break;
case NL80211_IFTYPE_ADHOC:
/* DA SA BSSID */
memcpy(hdr.addr1, skb->data, ETH_ALEN);
* EAPOL frames from the local station.
*/
if (unlikely(!ieee80211_vif_is_mesh(&sdata->vif) &&
+ (sdata->vif.type != NL80211_IFTYPE_OCB) &&
!multicast && !authorized &&
(cpu_to_be16(ethertype) != sdata->control_port_protocol ||
!ether_addr_equal(sdata->vif.addr, skb->data + ETH_ALEN)))) {
struct ieee80211_chanctx_conf *chanctx_conf;
int ac;
bool use_11b, enable_qos;
+ bool is_ocb; /* Use another EDCA parameters if dot11OCBActivated=true */
int aCWmin, aCWmax;
if (!local->ops->conf_tx)
*/
enable_qos = (sdata->vif.type != NL80211_IFTYPE_STATION);
+ is_ocb = (sdata->vif.type == NL80211_IFTYPE_OCB);
+
/* Set defaults according to 802.11-2007 Table 7-37 */
aCWmax = 1023;
if (use_11b)
qparam.cw_max = aCWmax;
qparam.cw_min = aCWmin;
qparam.txop = 0;
- qparam.aifs = 7;
+ if (is_ocb)
+ qparam.aifs = 9;
+ else
+ qparam.aifs = 7;
break;
/* never happens but let's not leave undefined */
default:
qparam.cw_max = aCWmax;
qparam.cw_min = aCWmin;
qparam.txop = 0;
- qparam.aifs = 3;
+ if (is_ocb)
+ qparam.aifs = 6;
+ else
+ qparam.aifs = 3;
break;
case IEEE80211_AC_VI:
qparam.cw_max = aCWmin;
qparam.cw_min = (aCWmin + 1) / 2 - 1;
- if (use_11b)
+ if (is_ocb)
+ qparam.txop = 0;
+ else if (use_11b)
qparam.txop = 6016/32;
else
qparam.txop = 3008/32;
- qparam.aifs = 2;
+
+ if (is_ocb)
+ qparam.aifs = 3;
+ else
+ qparam.aifs = 2;
break;
case IEEE80211_AC_VO:
qparam.cw_max = (aCWmin + 1) / 2 - 1;
qparam.cw_min = (aCWmin + 1) / 4 - 1;
- if (use_11b)
+ if (is_ocb)
+ qparam.txop = 0;
+ else if (use_11b)
qparam.txop = 3264/32;
else
qparam.txop = 1504/32;
sdata_unlock(sdata);
break;
case NL80211_IFTYPE_OCB:
- /* to be implemented in the future */
+ changed |= BSS_CHANGED_OCB;
+ ieee80211_bss_info_change_notify(sdata, changed);
break;
case NL80211_IFTYPE_ADHOC:
changed |= BSS_CHANGED_IBSS;
case NL80211_IFTYPE_ADHOC:
ra = skb->data;
break;
+ case NL80211_IFTYPE_OCB:
+ /* all stations are required to support WME */
+ qos = true;
+ break;
default:
break;
}