The accelerometer part of ST LSM303C is similar (perhaps even identical)
to the already supported standalone LIS2HH12 accelerometer, so just
add the new st,lsm303c-accel compatible for the existing definitions.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-3-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help
Say yes here to build support for STMicroelectronics accelerometers:
- LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+ LSM303C, LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
LNG2DM, LIS3DE, LIS2DE12, LIS2HH12
#define LIS2DE12_ACCEL_DEV_NAME "lis2de12"
#define LIS2HH12_ACCEL_DEV_NAME "lis2hh12"
#define LIS302DL_ACCEL_DEV_NAME "lis302dl"
+#define LSM303C_ACCEL_DEV_NAME "lsm303c_accel"
#define SC7A20_ACCEL_DEV_NAME "sc7a20"
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS2HH12_ACCEL_DEV_NAME,
+ [1] = LSM303C_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
.odr = {
.data = LIS302DL_ACCEL_DEV_NAME,
},
{
+ .compatible = "st,lsm303c-accel",
+ .data = LSM303C_ACCEL_DEV_NAME,
+ },
+ {
.compatible = "silan,sc7a20",
.data = SC7A20_ACCEL_DEV_NAME,
},
{ LIS2DE12_ACCEL_DEV_NAME },
{ LIS2HH12_ACCEL_DEV_NAME },
{ LIS302DL_ACCEL_DEV_NAME },
+ { LSM303C_ACCEL_DEV_NAME },
{ SC7A20_ACCEL_DEV_NAME },
{},
};
.compatible = "st,lis302dl",
.data = LIS302DL_ACCEL_DEV_NAME,
},
+ {
+ .compatible = "st,lsm303c-accel",
+ .data = LSM303C_ACCEL_DEV_NAME,
+ },
{}
};
MODULE_DEVICE_TABLE(of, st_accel_of_match);
{ LIS3DHH_ACCEL_DEV_NAME },
{ LIS3DE_ACCEL_DEV_NAME },
{ LIS302DL_ACCEL_DEV_NAME },
+ { LSM303C_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(spi, st_accel_id_table);