Several subsystems in the kernel (task scheduler and/or thermal at the
time of writing) can benefit from knowing about the energy consumed by
CPUs. Yet, this information can come from different sources (DT or
firmware for example), in different formats, hence making it hard to
exploit without a standard API.
As an attempt to address this, introduce a centralized Energy Model
(EM) management framework which aggregates the power values provided
by drivers into a table for each performance domain in the system. The
power cost tables are made available to interested clients (e.g. task
scheduler or thermal) via platform-agnostic APIs. The overall design
is represented by the diagram below (focused on Arm-related drivers as
an example, but applicable to any architecture):
+---------------+ +-----------------+ +-------------+
| Thermal (IPA) | | Scheduler (EAS) | | Other |
+---------------+ +-----------------+ +-------------+
| | em_pd_energy() |
| | em_cpu_get() |
+-----------+ | +--------+
| | |
v v v
+---------------------+
| |
| Energy Model |
| |
| Framework |
| |
+---------------------+
^ ^ ^
| | | em_register_perf_domain()
+----------+ | +---------+
| | |
+---------------+ +---------------+ +--------------+
| cpufreq-dt | | arm_scmi | | Other |
+---------------+ +---------------+ +--------------+
^ ^ ^
| | |
+--------------+ +---------------+ +--------------+
| Device Tree | | Firmware | | ? |
+--------------+ +---------------+ +--------------+
Drivers (typically, but not limited to, CPUFreq drivers) can register
data in the EM framework using the em_register_perf_domain() API. The
calling driver must provide a callback function with a standardized
signature that will be used by the EM framework to build the power
cost tables of the performance domain. This design should offer a lot of
flexibility to calling drivers which are free of reading information
from any location and to use any technique to compute power costs.
Moreover, the capacity states registered by drivers in the EM framework
are not required to match real performance states of the target. This
is particularly important on targets where the performance states are
not known by the OS.
The power cost coefficients managed by the EM framework are specified in
milli-watts. Although the two potential users of those coefficients (IPA
and EAS) only need relative correctness, IPA specifically needs to
compare the power of CPUs with the power of other components (GPUs, for
example), which are still expressed in absolute terms in their
respective subsystems. Hence, specifying the power of CPUs in
milli-watts should help transitioning IPA to using the EM framework
without introducing new problems by keeping units comparable across
sub-systems.
On the longer term, the EM of other devices than CPUs could also be
managed by the EM framework, which would enable to remove the absolute
unit. However, this is not absolutely required as a first step, so this
extension of the EM framework is left for later.
On the client side, the EM framework offers APIs to access the power
cost tables of a CPU (em_cpu_get()), and to estimate the energy
consumed by the CPUs of a performance domain (em_pd_energy()). Clients
such as the task scheduler can then use these APIs to access the shared
data structures holding the Energy Model of CPUs.
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: adharmap@codeaurora.org
Cc: chris.redpath@arm.com
Cc: currojerez@riseup.net
Cc: dietmar.eggemann@arm.com
Cc: edubezval@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: javi.merino@kernel.org
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: morten.rasmussen@arm.com
Cc: patrick.bellasi@arm.com
Cc: pkondeti@codeaurora.org
Cc: skannan@codeaurora.org
Cc: smuckle@google.com
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Cc: tkjos@google.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Cc: viresh.kumar@linaro.org
Link: https://lkml.kernel.org/r/20181203095628.11858-4-quentin.perret@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_ENERGY_MODEL_H
+#define _LINUX_ENERGY_MODEL_H
+#include <linux/cpumask.h>
+#include <linux/jump_label.h>
+#include <linux/kobject.h>
+#include <linux/rcupdate.h>
+#include <linux/sched/cpufreq.h>
+#include <linux/sched/topology.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_ENERGY_MODEL
+/**
+ * em_cap_state - Capacity state of a performance domain
+ * @frequency: The CPU frequency in KHz, for consistency with CPUFreq
+ * @power: The power consumed by 1 CPU at this level, in milli-watts
+ * @cost: The cost coefficient associated with this level, used during
+ * energy calculation. Equal to: power * max_frequency / frequency
+ */
+struct em_cap_state {
+ unsigned long frequency;
+ unsigned long power;
+ unsigned long cost;
+};
+
+/**
+ * em_perf_domain - Performance domain
+ * @table: List of capacity states, in ascending order
+ * @nr_cap_states: Number of capacity states
+ * @cpus: Cpumask covering the CPUs of the domain
+ *
+ * A "performance domain" represents a group of CPUs whose performance is
+ * scaled together. All CPUs of a performance domain must have the same
+ * micro-architecture. Performance domains often have a 1-to-1 mapping with
+ * CPUFreq policies.
+ */
+struct em_perf_domain {
+ struct em_cap_state *table;
+ int nr_cap_states;
+ unsigned long cpus[0];
+};
+
+#define EM_CPU_MAX_POWER 0xFFFF
+
+struct em_data_callback {
+ /**
+ * active_power() - Provide power at the next capacity state of a CPU
+ * @power : Active power at the capacity state in mW (modified)
+ * @freq : Frequency at the capacity state in kHz (modified)
+ * @cpu : CPU for which we do this operation
+ *
+ * active_power() must find the lowest capacity state of 'cpu' above
+ * 'freq' and update 'power' and 'freq' to the matching active power
+ * and frequency.
+ *
+ * The power is the one of a single CPU in the domain, expressed in
+ * milli-watts. It is expected to fit in the [0, EM_CPU_MAX_POWER]
+ * range.
+ *
+ * Return 0 on success.
+ */
+ int (*active_power)(unsigned long *power, unsigned long *freq, int cpu);
+};
+#define EM_DATA_CB(_active_power_cb) { .active_power = &_active_power_cb }
+
+struct em_perf_domain *em_cpu_get(int cpu);
+int em_register_perf_domain(cpumask_t *span, unsigned int nr_states,
+ struct em_data_callback *cb);
+
+/**
+ * em_pd_energy() - Estimates the energy consumed by the CPUs of a perf. domain
+ * @pd : performance domain for which energy has to be estimated
+ * @max_util : highest utilization among CPUs of the domain
+ * @sum_util : sum of the utilization of all CPUs in the domain
+ *
+ * Return: the sum of the energy consumed by the CPUs of the domain assuming
+ * a capacity state satisfying the max utilization of the domain.
+ */
+static inline unsigned long em_pd_energy(struct em_perf_domain *pd,
+ unsigned long max_util, unsigned long sum_util)
+{
+ unsigned long freq, scale_cpu;
+ struct em_cap_state *cs;
+ int i, cpu;
+
+ /*
+ * In order to predict the capacity state, map the utilization of the
+ * most utilized CPU of the performance domain to a requested frequency,
+ * like schedutil.
+ */
+ cpu = cpumask_first(to_cpumask(pd->cpus));
+ scale_cpu = arch_scale_cpu_capacity(NULL, cpu);
+ cs = &pd->table[pd->nr_cap_states - 1];
+ freq = map_util_freq(max_util, cs->frequency, scale_cpu);
+
+ /*
+ * Find the lowest capacity state of the Energy Model above the
+ * requested frequency.
+ */
+ for (i = 0; i < pd->nr_cap_states; i++) {
+ cs = &pd->table[i];
+ if (cs->frequency >= freq)
+ break;
+ }
+
+ /*
+ * The capacity of a CPU in the domain at that capacity state (cs)
+ * can be computed as:
+ *
+ * cs->freq * scale_cpu
+ * cs->cap = -------------------- (1)
+ * cpu_max_freq
+ *
+ * So, ignoring the costs of idle states (which are not available in
+ * the EM), the energy consumed by this CPU at that capacity state is
+ * estimated as:
+ *
+ * cs->power * cpu_util
+ * cpu_nrg = -------------------- (2)
+ * cs->cap
+ *
+ * since 'cpu_util / cs->cap' represents its percentage of busy time.
+ *
+ * NOTE: Although the result of this computation actually is in
+ * units of power, it can be manipulated as an energy value
+ * over a scheduling period, since it is assumed to be
+ * constant during that interval.
+ *
+ * By injecting (1) in (2), 'cpu_nrg' can be re-expressed as a product
+ * of two terms:
+ *
+ * cs->power * cpu_max_freq cpu_util
+ * cpu_nrg = ------------------------ * --------- (3)
+ * cs->freq scale_cpu
+ *
+ * The first term is static, and is stored in the em_cap_state struct
+ * as 'cs->cost'.
+ *
+ * Since all CPUs of the domain have the same micro-architecture, they
+ * share the same 'cs->cost', and the same CPU capacity. Hence, the
+ * total energy of the domain (which is the simple sum of the energy of
+ * all of its CPUs) can be factorized as:
+ *
+ * cs->cost * \Sum cpu_util
+ * pd_nrg = ------------------------ (4)
+ * scale_cpu
+ */
+ return cs->cost * sum_util / scale_cpu;
+}
+
+/**
+ * em_pd_nr_cap_states() - Get the number of capacity states of a perf. domain
+ * @pd : performance domain for which this must be done
+ *
+ * Return: the number of capacity states in the performance domain table
+ */
+static inline int em_pd_nr_cap_states(struct em_perf_domain *pd)
+{
+ return pd->nr_cap_states;
+}
+
+#else
+struct em_perf_domain {};
+struct em_data_callback {};
+#define EM_DATA_CB(_active_power_cb) { }
+
+static inline int em_register_perf_domain(cpumask_t *span,
+ unsigned int nr_states, struct em_data_callback *cb)
+{
+ return -EINVAL;
+}
+static inline struct em_perf_domain *em_cpu_get(int cpu)
+{
+ return NULL;
+}
+static inline unsigned long em_pd_energy(struct em_perf_domain *pd,
+ unsigned long max_util, unsigned long sum_util)
+{
+ return 0;
+}
+static inline int em_pd_nr_cap_states(struct em_perf_domain *pd)
+{
+ return 0;
+}
+#endif
+
+#endif
config CPU_PM
bool
+
+config ENERGY_MODEL
+ bool "Energy Model for CPUs"
+ depends on SMP
+ depends on CPU_FREQ
+ default n
+ help
+ Several subsystems (thermal and/or the task scheduler for example)
+ can leverage information about the energy consumed by CPUs to make
+ smarter decisions. This config option enables the framework from
+ which subsystems can access the energy models.
+
+ The exact usage of the energy model is subsystem-dependent.
+
+ If in doubt, say N.
obj-$(CONFIG_PM_WAKELOCKS) += wakelock.o
obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o
+
+obj-$(CONFIG_ENERGY_MODEL) += energy_model.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Energy Model of CPUs
+ *
+ * Copyright (c) 2018, Arm ltd.
+ * Written by: Quentin Perret, Arm ltd.
+ */
+
+#define pr_fmt(fmt) "energy_model: " fmt
+
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/energy_model.h>
+#include <linux/sched/topology.h>
+#include <linux/slab.h>
+
+/* Mapping of each CPU to the performance domain to which it belongs. */
+static DEFINE_PER_CPU(struct em_perf_domain *, em_data);
+
+/*
+ * Mutex serializing the registrations of performance domains and letting
+ * callbacks defined by drivers sleep.
+ */
+static DEFINE_MUTEX(em_pd_mutex);
+
+static struct em_perf_domain *em_create_pd(cpumask_t *span, int nr_states,
+ struct em_data_callback *cb)
+{
+ unsigned long opp_eff, prev_opp_eff = ULONG_MAX;
+ unsigned long power, freq, prev_freq = 0;
+ int i, ret, cpu = cpumask_first(span);
+ struct em_cap_state *table;
+ struct em_perf_domain *pd;
+ u64 fmax;
+
+ if (!cb->active_power)
+ return NULL;
+
+ pd = kzalloc(sizeof(*pd) + cpumask_size(), GFP_KERNEL);
+ if (!pd)
+ return NULL;
+
+ table = kcalloc(nr_states, sizeof(*table), GFP_KERNEL);
+ if (!table)
+ goto free_pd;
+
+ /* Build the list of capacity states for this performance domain */
+ for (i = 0, freq = 0; i < nr_states; i++, freq++) {
+ /*
+ * active_power() is a driver callback which ceils 'freq' to
+ * lowest capacity state of 'cpu' above 'freq' and updates
+ * 'power' and 'freq' accordingly.
+ */
+ ret = cb->active_power(&power, &freq, cpu);
+ if (ret) {
+ pr_err("pd%d: invalid cap. state: %d\n", cpu, ret);
+ goto free_cs_table;
+ }
+
+ /*
+ * We expect the driver callback to increase the frequency for
+ * higher capacity states.
+ */
+ if (freq <= prev_freq) {
+ pr_err("pd%d: non-increasing freq: %lu\n", cpu, freq);
+ goto free_cs_table;
+ }
+
+ /*
+ * The power returned by active_state() is expected to be
+ * positive, in milli-watts and to fit into 16 bits.
+ */
+ if (!power || power > EM_CPU_MAX_POWER) {
+ pr_err("pd%d: invalid power: %lu\n", cpu, power);
+ goto free_cs_table;
+ }
+
+ table[i].power = power;
+ table[i].frequency = prev_freq = freq;
+
+ /*
+ * The hertz/watts efficiency ratio should decrease as the
+ * frequency grows on sane platforms. But this isn't always
+ * true in practice so warn the user if a higher OPP is more
+ * power efficient than a lower one.
+ */
+ opp_eff = freq / power;
+ if (opp_eff >= prev_opp_eff)
+ pr_warn("pd%d: hertz/watts ratio non-monotonically decreasing: em_cap_state %d >= em_cap_state%d\n",
+ cpu, i, i - 1);
+ prev_opp_eff = opp_eff;
+ }
+
+ /* Compute the cost of each capacity_state. */
+ fmax = (u64) table[nr_states - 1].frequency;
+ for (i = 0; i < nr_states; i++) {
+ table[i].cost = div64_u64(fmax * table[i].power,
+ table[i].frequency);
+ }
+
+ pd->table = table;
+ pd->nr_cap_states = nr_states;
+ cpumask_copy(to_cpumask(pd->cpus), span);
+
+ return pd;
+
+free_cs_table:
+ kfree(table);
+free_pd:
+ kfree(pd);
+
+ return NULL;
+}
+
+/**
+ * em_cpu_get() - Return the performance domain for a CPU
+ * @cpu : CPU to find the performance domain for
+ *
+ * Return: the performance domain to which 'cpu' belongs, or NULL if it doesn't
+ * exist.
+ */
+struct em_perf_domain *em_cpu_get(int cpu)
+{
+ return READ_ONCE(per_cpu(em_data, cpu));
+}
+EXPORT_SYMBOL_GPL(em_cpu_get);
+
+/**
+ * em_register_perf_domain() - Register the Energy Model of a performance domain
+ * @span : Mask of CPUs in the performance domain
+ * @nr_states : Number of capacity states to register
+ * @cb : Callback functions providing the data of the Energy Model
+ *
+ * Create Energy Model tables for a performance domain using the callbacks
+ * defined in cb.
+ *
+ * If multiple clients register the same performance domain, all but the first
+ * registration will be ignored.
+ *
+ * Return 0 on success
+ */
+int em_register_perf_domain(cpumask_t *span, unsigned int nr_states,
+ struct em_data_callback *cb)
+{
+ unsigned long cap, prev_cap = 0;
+ struct em_perf_domain *pd;
+ int cpu, ret = 0;
+
+ if (!span || !nr_states || !cb)
+ return -EINVAL;
+
+ /*
+ * Use a mutex to serialize the registration of performance domains and
+ * let the driver-defined callback functions sleep.
+ */
+ mutex_lock(&em_pd_mutex);
+
+ for_each_cpu(cpu, span) {
+ /* Make sure we don't register again an existing domain. */
+ if (READ_ONCE(per_cpu(em_data, cpu))) {
+ ret = -EEXIST;
+ goto unlock;
+ }
+
+ /*
+ * All CPUs of a domain must have the same micro-architecture
+ * since they all share the same table.
+ */
+ cap = arch_scale_cpu_capacity(NULL, cpu);
+ if (prev_cap && prev_cap != cap) {
+ pr_err("CPUs of %*pbl must have the same capacity\n",
+ cpumask_pr_args(span));
+ ret = -EINVAL;
+ goto unlock;
+ }
+ prev_cap = cap;
+ }
+
+ /* Create the performance domain and add it to the Energy Model. */
+ pd = em_create_pd(span, nr_states, cb);
+ if (!pd) {
+ ret = -EINVAL;
+ goto unlock;
+ }
+
+ for_each_cpu(cpu, span) {
+ /*
+ * The per-cpu array can be read concurrently from em_cpu_get().
+ * The barrier enforces the ordering needed to make sure readers
+ * can only access well formed em_perf_domain structs.
+ */
+ smp_store_release(per_cpu_ptr(&em_data, cpu), pd);
+ }
+
+ pr_debug("Created perf domain %*pbl\n", cpumask_pr_args(span));
+unlock:
+ mutex_unlock(&em_pd_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(em_register_perf_domain);