+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/stargate2.c
- *
- * Author: Ed C. Epp
- * Created: Nov 05, 2002
- * Copyright: Intel Corp.
- *
- * Modified 2009: Jonathan Cameron <jic23@cam.ac.uk>
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/smc91x.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/property.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include <mach/smemc.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mfd/da903x.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define STARGATE_NR_IRQS (IRQ_BOARD_START + 8)
-
-/* Bluetooth */
-#define SG2_BT_RESET 81
-
-/* SD */
-#define SG2_GPIO_nSD_DETECT 90
-#define SG2_SD_POWER_ENABLE 89
-
-static unsigned long sg2_im2_unified_pin_config[] __initdata = {
- /* Device Identification for wakeup*/
- GPIO102_GPIO,
- /* DA9030 */
- GPIO1_GPIO,
-
- /* MMC */
- GPIO32_MMC_CLK,
- GPIO112_MMC_CMD,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
-
- /* 802.15.4 radio - driver out of mainline */
- GPIO22_GPIO, /* CC_RSTN */
- GPIO114_GPIO, /* CC_FIFO */
- GPIO116_GPIO, /* CC_CCA */
- GPIO0_GPIO, /* CC_FIFOP */
- GPIO16_GPIO, /* CCSFD */
- GPIO115_GPIO, /* Power enable */
-
- /* I2C */
- GPIO117_I2C_SCL,
- GPIO118_I2C_SDA,
-
- /* SSP 3 - 802.15.4 radio */
- GPIO39_GPIO, /* Chip Select */
- GPIO34_SSP3_SCLK,
- GPIO35_SSP3_TXD,
- GPIO41_SSP3_RXD,
-
- /* SSP 2 to daughter boards */
- GPIO11_SSP2_RXD,
- GPIO38_SSP2_TXD,
- GPIO36_SSP2_SCLK,
- GPIO37_GPIO, /* chip select */
-
- /* SSP 1 - to daughter boards */
- GPIO24_GPIO, /* Chip Select */
- GPIO23_SSP1_SCLK,
- GPIO25_SSP1_TXD,
- GPIO26_SSP1_RXD,
-
- /* BTUART Basic Connector*/
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_BTUART_RTS,
-
- /* STUART - IM2 via debug board not sure on SG2*/
- GPIO46_STUART_RXD,
- GPIO47_STUART_TXD,
-
- /* Basic sensor board */
- GPIO96_GPIO, /* accelerometer interrupt */
- GPIO99_GPIO, /* ADC interrupt */
-
- /* SHT15 */
- GPIO100_GPIO,
- GPIO98_GPIO,
-
- /* Basic sensor board */
- GPIO96_GPIO, /* accelerometer interrupt */
- GPIO99_GPIO, /* ADC interrupt */
-
- /* Connector pins specified as gpios */
- GPIO94_GPIO, /* large basic connector pin 14 */
- GPIO10_GPIO, /* large basic connector pin 23 */
-};
-
-static struct gpiod_lookup_table sht15_gpiod_table = {
- .dev_id = "sht15",
- .table = {
- /* FIXME: should this have |GPIO_OPEN_DRAIN set? */
- GPIO_LOOKUP("gpio-pxa", 100, "data", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("gpio-pxa", 98, "clk", GPIO_ACTIVE_HIGH),
- },
-};
-
-static struct platform_device sht15 = {
- .name = "sht15",
- .id = -1,
-};
-
-static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
- REGULATOR_SUPPLY("vcc", "sht15"),
-};
-
-enum stargate2_ldos{
- vcc_vref,
- vcc_cc2420,
- /* a mote connector? */
- vcc_mica,
- /* the CSR bluecore chip */
- vcc_bt,
- /* The two voltages available to sensor boards */
- vcc_sensor_1_8,
- vcc_sensor_3,
- /* directly connected to the pxa27x */
- vcc_sram_ext,
- vcc_pxa_pll,
- vcc_pxa_usim, /* Reference voltage for certain gpios */
- vcc_pxa_mem,
- vcc_pxa_flash,
- vcc_pxa_core, /*Dc-Dc buck not yet supported */
- vcc_lcd,
- vcc_bb,
- vcc_bbio, /*not sure!*/
- vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
-};
-
-/* The values of the various regulator constraints are obviously dependent
- * on exactly what is wired to each ldo. Unfortunately this information is
- * not generally available. More information has been requested from Xbow.
- */
-static struct regulator_init_data stargate2_ldo_init_data[] = {
- [vcc_bbio] = {
- .constraints = { /* board default 1.8V */
- .name = "vcc_bbio",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_bb] = {
- .constraints = { /* board default 2.8V */
- .name = "vcc_bb",
- .min_uV = 2700000,
- .max_uV = 3000000,
- },
- },
- [vcc_pxa_flash] = {
- .constraints = {/* default is 1.8V */
- .name = "vcc_pxa_flash",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_cc2420] = { /* also vcc_io */
- .constraints = {
- /* board default is 2.8V */
- .name = "vcc_cc2420",
- .min_uV = 2700000,
- .max_uV = 3300000,
- },
- },
- [vcc_vref] = { /* Reference for what? */
- .constraints = { /* default 1.8V */
- .name = "vcc_vref",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_sram_ext] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_sram_ext",
- .min_uV = 2800000,
- .max_uV = 2800000,
- },
- },
- [vcc_mica] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_mica",
- .min_uV = 2800000,
- .max_uV = 2800000,
- },
- },
- [vcc_bt] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_bt",
- .min_uV = 2800000,
- .max_uV = 2800000,
- },
- },
- [vcc_lcd] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_lcd",
- .min_uV = 2700000,
- .max_uV = 3300000,
- },
- },
- [vcc_io] = { /* Same or higher than everything
- * bar vccbat and vccusb */
- .constraints = { /* default 2.8V */
- .name = "vcc_io",
- .min_uV = 2692000,
- .max_uV = 3300000,
- },
- },
- [vcc_sensor_1_8] = {
- .constraints = { /* default 1.8V */
- .name = "vcc_sensor_1_8",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_sensor_3] = { /* curiously default 2.8V */
- .constraints = {
- .name = "vcc_sensor_3",
- .min_uV = 2800000,
- .max_uV = 3000000,
- },
- .num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
- .consumer_supplies = stargate2_sensor_3_con,
- },
- [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
- .constraints = {
- .name = "vcc_pxa_pll",
- .min_uV = 1170000,
- .max_uV = 1430000,
- },
- },
- [vcc_pxa_usim] = {
- .constraints = { /* default 1.8V */
- .name = "vcc_pxa_usim",
- .min_uV = 1710000,
- .max_uV = 2160000,
- },
- },
- [vcc_pxa_mem] = {
- .constraints = { /* default 1.8V */
- .name = "vcc_pxa_mem",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
-};
-
-static struct mtd_partition stargate2flash_partitions[] = {
- {
- .name = "Bootloader",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = 0,
- }, {
- .name = "Kernel",
- .size = 0x00200000,
- .offset = 0x00040000,
- .mask_flags = 0
- }, {
- .name = "Filesystem",
- .size = 0x01DC0000,
- .offset = 0x00240000,
- .mask_flags = 0
- },
-};
-
-static struct resource flash_resources = {
- .start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data stargate2_flash_data = {
- .map_name = "cfi_probe",
- .parts = stargate2flash_partitions,
- .nr_parts = ARRAY_SIZE(stargate2flash_partitions),
- .name = "PXA27xOnChipROM",
- .width = 2,
-};
-
-static struct platform_device stargate2_flash_device = {
- .name = "pxa2xx-flash",
- .id = 0,
- .dev = {
- .platform_data = &stargate2_flash_data,
- },
- .resource = &flash_resources,
- .num_resources = 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_0_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_1_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_2_info = {
- .num_chipselect = 1,
-};
-
-/* An upcoming kernel change will scrap SFRM usage so these
- * drivers have been moved to use GPIOs */
-static struct pxa2xx_spi_chip staccel_chip_info = {
- .tx_threshold = 8,
- .rx_threshold = 8,
- .dma_burst_size = 8,
- .timeout = 235,
- .gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
- .tx_threshold = 8,
- .rx_threshold = 8,
- .dma_burst_size = 8,
- .timeout = 235,
- .gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
- {
- .modalias = "lis3l02dq",
- .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
- .bus_num = 1,
- .chip_select = 0,
- .controller_data = &staccel_chip_info,
- .irq = PXA_GPIO_TO_IRQ(96),
- }, {
- .modalias = "cc2420",
- .max_speed_hz = 6500000,
- .bus_num = 3,
- .chip_select = 0,
- .controller_data = &cc2420_info,
- },
-};
-
-static void sg2_udc_command(int cmd)
-{
- switch (cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
- break;
- }
-}
-
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
- .fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
- .fast_mode = 1,
-};
-
-static void __init imote2_stargate2_init(void)
-{
-
- pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
-
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
-
- pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
- pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
- pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-
- pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
- pxa_set_i2c_info(&i2c_pdata);
-}
-
-#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
- * there is no option to hotplug cards, making all this rather simple
- */
-static int imote2_mci_get_ro(struct device *dev)
-{
- return 0;
-}
-
-/* Rather simple case as hotplugging not possible */
-static struct pxamci_platform_data imote2_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
- .get_ro = imote2_mci_get_ro,
-};
-
-static struct gpio_led imote2_led_pins[] = {
- {
- .name = "imote2:red",
- .gpio = 103,
- .active_low = 1,
- }, {
- .name = "imote2:green",
- .gpio = 104,
- .active_low = 1,
- }, {
- .name = "imote2:blue",
- .gpio = 105,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data imote2_led_data = {
- .num_leds = ARRAY_SIZE(imote2_led_pins),
- .leds = imote2_led_pins,
-};
-
-static struct platform_device imote2_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &imote2_led_data,
- },
-};
-
-static struct da903x_subdev_info imote2_da9030_subdevs[] = {
- {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO2,
- .platform_data = &stargate2_ldo_init_data[vcc_bbio],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO3,
- .platform_data = &stargate2_ldo_init_data[vcc_bb],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO4,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO5,
- .platform_data = &stargate2_ldo_init_data[vcc_cc2420],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO6,
- .platform_data = &stargate2_ldo_init_data[vcc_vref],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO7,
- .platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO8,
- .platform_data = &stargate2_ldo_init_data[vcc_mica],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO9,
- .platform_data = &stargate2_ldo_init_data[vcc_bt],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO10,
- .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO11,
- .platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO12,
- .platform_data = &stargate2_ldo_init_data[vcc_lcd],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO15,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO17,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
- }, {
- .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
- .id = DA9030_ID_LDO18,
- .platform_data = &stargate2_ldo_init_data[vcc_io],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO19,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
- },
-};
-
-static struct da903x_platform_data imote2_da9030_pdata = {
- .num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
- .subdevs = imote2_da9030_subdevs,
-};
-
-static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
- {
- .type = "da9030",
- .addr = 0x49,
- .platform_data = &imote2_da9030_pdata,
- .irq = PXA_GPIO_TO_IRQ(1),
- },
-};
-
-static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
- { /* UCAM sensor board */
- .type = "max1239",
- .addr = 0x35,
- }, { /* ITS400 Sensor board only */
- .type = "max1363",
- .addr = 0x34,
- /* Through a nand gate - Also beware, on V2 sensor board the
- * pull up resistors are missing.
- */
- .irq = PXA_GPIO_TO_IRQ(99),
- }, { /* ITS400 Sensor board only */
- .type = "tsl2561",
- .addr = 0x49,
- /* Through a nand gate - Also beware, on V2 sensor board the
- * pull up resistors are missing.
- */
- .irq = PXA_GPIO_TO_IRQ(99),
- }, { /* ITS400 Sensor board only */
- .type = "tmp175",
- .addr = 0x4A,
- .irq = PXA_GPIO_TO_IRQ(96),
- }, { /* IMB400 Multimedia board */
- .type = "wm8940",
- .addr = 0x1A,
- },
-};
-
-static unsigned long imote2_pin_config[] __initdata = {
-
- /* Button */
- GPIO91_GPIO,
-
- /* LEDS */
- GPIO103_GPIO, /* red led */
- GPIO104_GPIO, /* green led */
- GPIO105_GPIO, /* blue led */
-};
-
-static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
- .udc_command = sg2_udc_command,
-};
-
-static struct platform_device imote2_audio_device = {
- .name = "imote2-audio",
- .id = -1,
-};
-
-static struct platform_device *imote2_devices[] = {
- &stargate2_flash_device,
- &imote2_leds,
- &sht15,
- &imote2_audio_device,
-};
-
-static void __init imote2_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
-
- imote2_stargate2_init();
-
- gpiod_add_lookup_table(&sht15_gpiod_table);
- platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
-
- i2c_register_board_info(0, imote2_i2c_board_info,
- ARRAY_SIZE(imote2_i2c_board_info));
- i2c_register_board_info(1, imote2_pwr_i2c_board_info,
- ARRAY_SIZE(imote2_pwr_i2c_board_info));
-
- pxa_set_mci_info(&imote2_mci_platform_data);
- pxa_set_udc_info(&imote2_udc_info);
-}
-#endif
-
-#ifdef CONFIG_MACH_STARGATE2
-
-static unsigned long stargate2_pin_config[] __initdata = {
-
- GPIO15_nCS_1, /* SRAM */
- /* SMC91x */
- GPIO80_nCS_4,
- GPIO40_GPIO, /*cable detect?*/
-
- /* Button */
- GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
-
- /* Compact Flash */
- GPIO79_PSKTSEL,
- GPIO48_nPOE,
- GPIO49_nPWE,
- GPIO50_nPIOR,
- GPIO51_nPIOW,
- GPIO85_nPCE_1,
- GPIO54_nPCE_2,
- GPIO55_nPREG,
- GPIO56_nPWAIT,
- GPIO57_nIOIS16,
- GPIO120_GPIO, /* Buff ctrl */
- GPIO108_GPIO, /* Power ctrl */
- GPIO82_GPIO, /* Reset */
- GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
-
- /* MMC not shared with imote2 */
- GPIO90_GPIO, /* nSD detect */
- GPIO89_GPIO, /* SD_POWER_ENABLE */
-
- /* Bluetooth */
- GPIO81_GPIO, /* reset */
-};
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .name = "smc91x-regs",
- .start = (PXA_CS4_PHYS + 0x300),
- .end = (PXA_CS4_PHYS + 0xfffff),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PXA_GPIO_TO_IRQ(40),
- .end = PXA_GPIO_TO_IRQ(40),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-static struct smc91x_platdata stargate2_smc91x_info = {
- .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
- | SMC91X_NOWAIT | SMC91X_USE_DMA,
- .pxa_u16_align4 = true,
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
- .dev = {
- .platform_data = &stargate2_smc91x_info,
- },
-};
-
-
-/*
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert / eject.
- */
-static int stargate2_mci_init(struct device *dev,
- irq_handler_t stargate2_detect_int,
- void *data)
-{
- int err;
-
- err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
- if (err) {
- printk(KERN_ERR "Can't get the gpio for SD power control");
- goto return_err;
- }
- gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
-
- err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
- if (err) {
- printk(KERN_ERR "Can't get the sd detect gpio");
- goto free_power_en;
- }
- gpio_direction_input(SG2_GPIO_nSD_DETECT);
-
- err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT),
- stargate2_detect_int,
- IRQ_TYPE_EDGE_BOTH,
- "MMC card detect",
- data);
- if (err) {
- printk(KERN_ERR "can't request MMC card detect IRQ\n");
- goto free_nsd_detect;
- }
- return 0;
-
- free_nsd_detect:
- gpio_free(SG2_GPIO_nSD_DETECT);
- free_power_en:
- gpio_free(SG2_SD_POWER_ENABLE);
- return_err:
- return err;
-}
-
-/**
- * stargate2_mci_setpower() - set state of mmc power supply
- *
- * Very simple control. Either it is on or off and is controlled by
- * a gpio pin */
-static int stargate2_mci_setpower(struct device *dev, unsigned int vdd)
-{
- gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
- return 0;
-}
-
-static void stargate2_mci_exit(struct device *dev, void *data)
-{
- free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data);
- gpio_free(SG2_SD_POWER_ENABLE);
- gpio_free(SG2_GPIO_nSD_DETECT);
-}
-
-static struct pxamci_platform_data stargate2_mci_platform_data = {
- .detect_delay_ms = 250,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = stargate2_mci_init,
- .setpower = stargate2_mci_setpower,
- .exit = stargate2_mci_exit,
-};
-
-
-/*
- * SRAM - The Stargate 2 has 32MB of SRAM.
- *
- * Here it is made available as an MTD. This will then
- * typically have a cifs filesystem created on it to provide
- * fast temporary storage.
- */
-static struct resource sram_resources = {
- .start = PXA_CS1_PHYS,
- .end = PXA_CS1_PHYS + SZ_32M-1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platdata_mtd_ram stargate2_sram_pdata = {
- .mapname = "Stargate2 SRAM",
- .bankwidth = 2,
-};
-
-static struct platform_device stargate2_sram = {
- .name = "mtd-ram",
- .id = 0,
- .resource = &sram_resources,
- .num_resources = 1,
- .dev = {
- .platform_data = &stargate2_sram_pdata,
- },
-};
-
-static struct pcf857x_platform_data platform_data_pcf857x = {
- .gpio_base = 128,
- .n_latch = 0,
- .setup = NULL,
- .teardown = NULL,
- .context = NULL,
-};
-
-static const struct property_entry pca9500_eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 4),
- { }
-};
-
-static const struct software_node pca9500_eeprom_node = {
- .properties = pca9500_eeprom_properties,
-};
-
-/**
- * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
- **/
-static int stargate2_reset_bluetooth(void)
-{
- int err;
- err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
- if (err) {
- printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
- return err;
- }
- gpio_direction_output(SG2_BT_RESET, 1);
- mdelay(5);
- /* now reset it - 5 msec minimum */
- gpio_set_value(SG2_BT_RESET, 0);
- mdelay(10);
- gpio_set_value(SG2_BT_RESET, 1);
- gpio_free(SG2_BT_RESET);
- return 0;
-}
-
-static struct led_info stargate2_leds[] = {
- {
- .name = "sg2:red",
- .flags = DA9030_LED_RATE_ON,
- }, {
- .name = "sg2:blue",
- .flags = DA9030_LED_RATE_ON,
- }, {
- .name = "sg2:green",
- .flags = DA9030_LED_RATE_ON,
- },
-};
-
-static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
- {
- .name = "da903x-led",
- .id = DA9030_ID_LED_2,
- .platform_data = &stargate2_leds[0],
- }, {
- .name = "da903x-led",
- .id = DA9030_ID_LED_3,
- .platform_data = &stargate2_leds[2],
- }, {
- .name = "da903x-led",
- .id = DA9030_ID_LED_4,
- .platform_data = &stargate2_leds[1],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO2,
- .platform_data = &stargate2_ldo_init_data[vcc_bbio],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO3,
- .platform_data = &stargate2_ldo_init_data[vcc_bb],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO4,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO5,
- .platform_data = &stargate2_ldo_init_data[vcc_cc2420],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO6,
- .platform_data = &stargate2_ldo_init_data[vcc_vref],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO7,
- .platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO8,
- .platform_data = &stargate2_ldo_init_data[vcc_mica],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO9,
- .platform_data = &stargate2_ldo_init_data[vcc_bt],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO10,
- .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO11,
- .platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO12,
- .platform_data = &stargate2_ldo_init_data[vcc_lcd],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO15,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO17,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
- }, {
- .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
- .id = DA9030_ID_LDO18,
- .platform_data = &stargate2_ldo_init_data[vcc_io],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO19,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
- },
-};
-
-static struct da903x_platform_data stargate2_da9030_pdata = {
- .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
- .subdevs = stargate2_da9030_subdevs,
-};
-
-static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
- {
- .type = "da9030",
- .addr = 0x49,
- .platform_data = &stargate2_da9030_pdata,
- .irq = PXA_GPIO_TO_IRQ(1),
- },
-};
-
-static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
- /* Techically this a pca9500 - but it's compatible with the 8574
- * for gpio expansion and the 24c02 for eeprom access.
- */
- {
- .type = "pcf8574",
- .addr = 0x27,
- .platform_data = &platform_data_pcf857x,
- }, {
- .type = "24c02",
- .addr = 0x57,
- .swnode = &pca9500_eeprom_node,
- }, {
- .type = "max1238",
- .addr = 0x35,
- }, { /* ITS400 Sensor board only */
- .type = "max1363",
- .addr = 0x34,
- /* Through a nand gate - Also beware, on V2 sensor board the
- * pull up resistors are missing.
- */
- .irq = PXA_GPIO_TO_IRQ(99),
- }, { /* ITS400 Sensor board only */
- .type = "tsl2561",
- .addr = 0x49,
- /* Through a nand gate - Also beware, on V2 sensor board the
- * pull up resistors are missing.
- */
- .irq = PXA_GPIO_TO_IRQ(99),
- }, { /* ITS400 Sensor board only */
- .type = "tmp175",
- .addr = 0x4A,
- .irq = PXA_GPIO_TO_IRQ(96),
- },
-};
-
-/* Board doesn't support cable detection - so always lie and say
- * something is there.
- */
-static int sg2_udc_detect(void)
-{
- return 1;
-}
-
-static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
- .udc_is_connected = sg2_udc_detect,
- .udc_command = sg2_udc_command,
-};
-
-static struct platform_device *stargate2_devices[] = {
- &stargate2_flash_device,
- &stargate2_sram,
- &smc91x_device,
- &sht15,
-};
-
-static void __init stargate2_init(void)
-{
- /* This is probably a board specific hack as this must be set
- prior to connecting the MFP stuff up. */
- __raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
-
- pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
-
- imote2_stargate2_init();
-
- gpiod_add_lookup_table(&sht15_gpiod_table);
- platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
-
- i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
- i2c_register_board_info(1, stargate2_pwr_i2c_board_info,
- ARRAY_SIZE(stargate2_pwr_i2c_board_info));
-
- pxa_set_mci_info(&stargate2_mci_platform_data);
-
- pxa_set_udc_info(&stargate2_udc_info);
-
- stargate2_reset_bluetooth();
-}
-#endif
-
-#ifdef CONFIG_MACH_INTELMOTE2
-MACHINE_START(INTELMOTE2, "IMOTE 2")
- .map_io = pxa27x_map_io,
- .nr_irqs = PXA_NR_IRQS,
- .init_irq = pxa27x_init_irq,
- .handle_irq = pxa27x_handle_irq,
- .init_time = pxa_timer_init,
- .init_machine = imote2_init,
- .atag_offset = 0x100,
- .restart = pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_STARGATE2
-MACHINE_START(STARGATE2, "Stargate 2")
- .map_io = pxa27x_map_io,
- .nr_irqs = STARGATE_NR_IRQS,
- .init_irq = pxa27x_init_irq,
- .handle_irq = pxa27x_handle_irq,
- .init_time = pxa_timer_init,
- .init_machine = stargate2_init,
- .atag_offset = 0x100,
- .restart = pxa_restart,
-MACHINE_END
-#endif