OSDN Git Service

ARM: dts: vf610: use new GPIO support
authorStefan Agner <stefan@agner.ch>
Tue, 4 Nov 2014 13:07:08 +0000 (14:07 +0100)
committerShawn Guo <shawn.guo@linaro.org>
Sun, 23 Nov 2014 07:08:11 +0000 (15:08 +0800)
Use GPIO support by adding SD card detection configuration and
GPIO pinmux for Colibri's standard GPIO pins. Attach the GPIO
pins to the iomuxc node to get the GPIO pin settings applied.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
arch/arm/boot/dts/vf-colibri.dtsi
arch/arm/boot/dts/vf610-twr.dts
arch/arm/boot/dts/vfxxx.dtsi

index ab40367..ab9616d 100644 (file)
@@ -31,6 +31,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc1>;
        bus-width = <4>;
+       cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 };
 
 &fec1 {
 
 &iomuxc {
        vf610-colibri {
+               pinctrl_gpio_ext: gpio_ext {
+                       fsl,pins = <
+                               VF610_PAD_PTD10__GPIO_89        0x22ed /* EXT_IO_0 */
+                               VF610_PAD_PTD9__GPIO_88         0x22ed /* EXT_IO_1 */
+                               VF610_PAD_PTD26__GPIO_68        0x22ed /* EXT_IO_2 */
+                       >;
+               };
+
                pinctrl_esdhc1: esdhc1grp {
                        fsl,pins = <
                                VF610_PAD_PTA24__ESDHC1_CLK     0x31ef
index ebc906b..793a376 100644 (file)
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc1>;
        bus-width = <4>;
+       cd-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
 
index 4e70833..505969a 100644 (file)
@@ -10,6 +10,7 @@
 #include "vf610-pinfunc.h"
 #include <dt-bindings/clock/vf610-clock.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        aliases {