[remove] : Removed x86_64 service configs

diff --git a/channels/cinnamon/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf b/channels/cinnamon/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf
deleted file mode 100644 (file)
index 8bacf64..0000000
--- a/channels/cinnamon/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf
+++ /dev/null
@@ -1,114 +0,0 @@
-# Systemd services manipulation.
-#
-# This module can enable services and targets for systemd
-# (if packaging doesn't already do that). It can calso
-# disable services (but not targets).
-#
-# First, services are enabled; then targets; then services
-# are disabled -- this order of operations is fixed.
----
-
-# There are three configuration keys for this module:
-# *services*, *targets* and *disable*. The value of each
-# key is a list of entries. Each entry has two keys:
-#   - *name* is the (string) name of the service or target that is being
-#     changed. Use quotes. Don't include ".target" or ".service"
-#     in the name.
-#   - *mandatory* is a boolean option, which states whether the change
-#     must be done successfully. If systemd reports an error while changing
-#     a mandatory entry, the installation will fail. When mandatory is false,
-#     errors for that entry (service or target) are ignored. If mandatory
-#     is not specified, the default is false.
-#
-# An entry may also be given as a single string, which is then
-# interpreted as the name of the service. In this case, mandatory
-# is also set to the default of false.
-#
-# Use [] to express an empty list.
-
-# # This example enables NetworkManager (and fails if it can't),
-# # disables cups (and ignores failure). Then it enables the
-# # graphical target (e.g. so that SDDM runs for login), and
-# # finally disables pacman-init (an ArchLinux-only service).
-# #
-# # Enables <name>.service
-# services:
-#   - name: "NetworkManager"
-#     mandatory: true
-#   - name: "cups"
-#     mandatory: false
-#
-# # Enables <name>.target
-# targets:
-#   - name: "graphical"
-#     mandatory: true
-#
-# # Disables <name>.service
-# disable:
-#   - name: "pacman-init"
-#     mandatory: false
-#
-# # Disables <name>.target
-# #     .. this shows how to use just the name
-# disable-targets:
-#   - graphical
-#
-# # Masks (stronger version of disable). This section
-# # is unusual because you **must** include the suffix
-# # (e.g. ".service") as part of the name, so, e.g. to mask
-# # NetworkManager (rather than just disable it) you must
-# # specify "NetworkManager.service" as name.
-# mask:
-#  - name: "NetworkManager.service"
-#  - mandatory: true
-
-# By default, no changes are made.
-#services: []
-#targets: []
-#disable: []
-disable-targets: []
-
-# Manjaro settings
-
-services:
-  - name: "NetworkManager"
-    mandatory: false
-
-  - name: "org.cups.cupsd"
-    mandatory: false
-
-  - name: "lightdm-plymouth"
-    mandatory: false
-
-  - name: "pacman-init"
-    mandatory: false
-
-  - name: "tlp"
-    mandatory: false
-
-  - name: "tlp-sleep"
-    mandatory: false
-
-  - name: "snapd.apparmor"
-    mandatory: false
-
-  - name: "apparmor"
-    mandatory: false
-
-  - name: "snapd"
-    mandatory: false
-
-targets:
-  - name: "graphical"
-    mandatory: true
-
-disable:
-  - name: "dhcpcd"
-    mandatory: false
-
-mask:
-  - name: "systemd-rfkill"
-    mandatory: false
-
-  - name: "systemd-rfkill.socket"
-    mandatory: false

diff --git a/channels/cinnamon/airootfs.x86_64/usr/share/calamares/modules/services.conf b/channels/cinnamon/airootfs.x86_64/usr/share/calamares/modules/services.conf
deleted file mode 100644 (file)
index ece1eda..0000000
--- a/channels/cinnamon/airootfs.x86_64/usr/share/calamares/modules/services.conf
+++ /dev/null
@@ -1,114 +0,0 @@
-# Systemd services manipulation.
-#
-# This module can enable services and targets for systemd
-# (if packaging doesn't already do that). It can calso
-# disable services (but not targets).
-#
-# First, services are enabled; then targets; then services
-# are disabled -- this order of operations is fixed.
----
-
-# There are three configuration keys for this module:
-# *services*, *targets* and *disable*. The value of each
-# key is a list of entries. Each entry has two keys:
-#   - *name* is the (string) name of the service or target that is being
-#     changed. Use quotes. Don't include ".target" or ".service"
-#     in the name.
-#   - *mandatory* is a boolean option, which states whether the change
-#     must be done successfully. If systemd reports an error while changing
-#     a mandatory entry, the installation will fail. When mandatory is false,
-#     errors for that entry (service or target) are ignored. If mandatory
-#     is not specified, the default is false.
-#
-# An entry may also be given as a single string, which is then
-# interpreted as the name of the service. In this case, mandatory
-# is also set to the default of false.
-#
-# Use [] to express an empty list.
-
-# # This example enables NetworkManager (and fails if it can't),
-# # disables cups (and ignores failure). Then it enables the
-# # graphical target (e.g. so that SDDM runs for login), and
-# # finally disables pacman-init (an ArchLinux-only service).
-# #
-# # Enables <name>.service
-# services:
-#   - name: "NetworkManager"
-#     mandatory: true
-#   - name: "cups"
-#     mandatory: false
-#
-# # Enables <name>.target
-# targets:
-#   - name: "graphical"
-#     mandatory: true
-#
-# # Disables <name>.service
-# disable:
-#   - name: "pacman-init"
-#     mandatory: false
-#
-# # Disables <name>.target
-# #     .. this shows how to use just the name
-# disable-targets:
-#   - graphical
-#
-# # Masks (stronger version of disable). This section
-# # is unusual because you **must** include the suffix
-# # (e.g. ".service") as part of the name, so, e.g. to mask
-# # NetworkManager (rather than just disable it) you must
-# # specify "NetworkManager.service" as name.
-# mask:
-#  - name: "NetworkManager.service"
-#  - mandatory: true
-
-# By default, no changes are made.
-#services: []
-#targets: []
-#disable: []
-disable-targets: []
-
-# Manjaro settings
-
-services:
-  - name: "NetworkManager"
-    mandatory: false
-
-  - name: "org.cups.cupsd"
-    mandatory: false
-
-  - name: "lightdm"
-    mandatory: false
-
-  - name: "pacman-init"
-    mandatory: false
-
-  - name: "tlp"
-    mandatory: false
-
-  - name: "tlp-sleep"
-    mandatory: false
-
-  - name: "snapd.apparmor"
-    mandatory: false
-
-  - name: "apparmor"
-    mandatory: false
-
-  - name: "snapd"
-    mandatory: false
-
-targets:
-  - name: "graphical"
-    mandatory: true
-
-disable:
-  - name: "dhcpcd"
-    mandatory: false
-
-mask:
-  - name: "systemd-rfkill"
-    mandatory: false
-
-  - name: "systemd-rfkill.socket"
-    mandatory: false

diff --git a/channels/lxde/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf b/channels/lxde/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf
deleted file mode 100644 (file)
index 8bacf64..0000000
--- a/channels/lxde/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf
+++ /dev/null
@@ -1,114 +0,0 @@
-# Systemd services manipulation.
-#
-# This module can enable services and targets for systemd
-# (if packaging doesn't already do that). It can calso
-# disable services (but not targets).
-#
-# First, services are enabled; then targets; then services
-# are disabled -- this order of operations is fixed.
----
-
-# There are three configuration keys for this module:
-# *services*, *targets* and *disable*. The value of each
-# key is a list of entries. Each entry has two keys:
-#   - *name* is the (string) name of the service or target that is being
-#     changed. Use quotes. Don't include ".target" or ".service"
-#     in the name.
-#   - *mandatory* is a boolean option, which states whether the change
-#     must be done successfully. If systemd reports an error while changing
-#     a mandatory entry, the installation will fail. When mandatory is false,
-#     errors for that entry (service or target) are ignored. If mandatory
-#     is not specified, the default is false.
-#
-# An entry may also be given as a single string, which is then
-# interpreted as the name of the service. In this case, mandatory
-# is also set to the default of false.
-#
-# Use [] to express an empty list.
-
-# # This example enables NetworkManager (and fails if it can't),
-# # disables cups (and ignores failure). Then it enables the
-# # graphical target (e.g. so that SDDM runs for login), and
-# # finally disables pacman-init (an ArchLinux-only service).
-# #
-# # Enables <name>.service
-# services:
-#   - name: "NetworkManager"
-#     mandatory: true
-#   - name: "cups"
-#     mandatory: false
-#
-# # Enables <name>.target
-# targets:
-#   - name: "graphical"
-#     mandatory: true
-#
-# # Disables <name>.service
-# disable:
-#   - name: "pacman-init"
-#     mandatory: false
-#
-# # Disables <name>.target
-# #     .. this shows how to use just the name
-# disable-targets:
-#   - graphical
-#
-# # Masks (stronger version of disable). This section
-# # is unusual because you **must** include the suffix
-# # (e.g. ".service") as part of the name, so, e.g. to mask
-# # NetworkManager (rather than just disable it) you must
-# # specify "NetworkManager.service" as name.
-# mask:
-#  - name: "NetworkManager.service"
-#  - mandatory: true
-
-# By default, no changes are made.
-#services: []
-#targets: []
-#disable: []
-disable-targets: []
-
-# Manjaro settings
-
-services:
-  - name: "NetworkManager"
-    mandatory: false
-
-  - name: "org.cups.cupsd"
-    mandatory: false
-
-  - name: "lightdm-plymouth"
-    mandatory: false
-
-  - name: "pacman-init"
-    mandatory: false
-
-  - name: "tlp"
-    mandatory: false
-
-  - name: "tlp-sleep"
-    mandatory: false
-
-  - name: "snapd.apparmor"
-    mandatory: false
-
-  - name: "apparmor"
-    mandatory: false
-
-  - name: "snapd"
-    mandatory: false
-
-targets:
-  - name: "graphical"
-    mandatory: true
-
-disable:
-  - name: "dhcpcd"
-    mandatory: false
-
-mask:
-  - name: "systemd-rfkill"
-    mandatory: false
-
-  - name: "systemd-rfkill.socket"
-    mandatory: false

diff --git a/channels/lxde/airootfs.x86_64/usr/share/calamares/modules/services.conf b/channels/lxde/airootfs.x86_64/usr/share/calamares/modules/services.conf
deleted file mode 100644 (file)
index ece1eda..0000000
--- a/channels/lxde/airootfs.x86_64/usr/share/calamares/modules/services.conf
+++ /dev/null
@@ -1,114 +0,0 @@
-# Systemd services manipulation.
-#
-# This module can enable services and targets for systemd
-# (if packaging doesn't already do that). It can calso
-# disable services (but not targets).
-#
-# First, services are enabled; then targets; then services
-# are disabled -- this order of operations is fixed.
----
-
-# There are three configuration keys for this module:
-# *services*, *targets* and *disable*. The value of each
-# key is a list of entries. Each entry has two keys:
-#   - *name* is the (string) name of the service or target that is being
-#     changed. Use quotes. Don't include ".target" or ".service"
-#     in the name.
-#   - *mandatory* is a boolean option, which states whether the change
-#     must be done successfully. If systemd reports an error while changing
-#     a mandatory entry, the installation will fail. When mandatory is false,
-#     errors for that entry (service or target) are ignored. If mandatory
-#     is not specified, the default is false.
-#
-# An entry may also be given as a single string, which is then
-# interpreted as the name of the service. In this case, mandatory
-# is also set to the default of false.
-#
-# Use [] to express an empty list.
-
-# # This example enables NetworkManager (and fails if it can't),
-# # disables cups (and ignores failure). Then it enables the
-# # graphical target (e.g. so that SDDM runs for login), and
-# # finally disables pacman-init (an ArchLinux-only service).
-# #
-# # Enables <name>.service
-# services:
-#   - name: "NetworkManager"
-#     mandatory: true
-#   - name: "cups"
-#     mandatory: false
-#
-# # Enables <name>.target
-# targets:
-#   - name: "graphical"
-#     mandatory: true
-#
-# # Disables <name>.service
-# disable:
-#   - name: "pacman-init"
-#     mandatory: false
-#
-# # Disables <name>.target
-# #     .. this shows how to use just the name
-# disable-targets:
-#   - graphical
-#
-# # Masks (stronger version of disable). This section
-# # is unusual because you **must** include the suffix
-# # (e.g. ".service") as part of the name, so, e.g. to mask
-# # NetworkManager (rather than just disable it) you must
-# # specify "NetworkManager.service" as name.
-# mask:
-#  - name: "NetworkManager.service"
-#  - mandatory: true
-
-# By default, no changes are made.
-#services: []
-#targets: []
-#disable: []
-disable-targets: []
-
-# Manjaro settings
-
-services:
-  - name: "NetworkManager"
-    mandatory: false
-
-  - name: "org.cups.cupsd"
-    mandatory: false
-
-  - name: "lightdm"
-    mandatory: false
-
-  - name: "pacman-init"
-    mandatory: false
-
-  - name: "tlp"
-    mandatory: false
-
-  - name: "tlp-sleep"
-    mandatory: false
-
-  - name: "snapd.apparmor"
-    mandatory: false
-
-  - name: "apparmor"
-    mandatory: false
-
-  - name: "snapd"
-    mandatory: false
-
-targets:
-  - name: "graphical"
-    mandatory: true
-
-disable:
-  - name: "dhcpcd"
-    mandatory: false
-
-mask:
-  - name: "systemd-rfkill"
-    mandatory: false
-
-  - name: "systemd-rfkill.socket"
-    mandatory: false

diff --git a/channels/serene/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf b/channels/serene/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf
deleted file mode 100644 (file)
index 8bacf64..0000000
--- a/channels/serene/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf
+++ /dev/null
@@ -1,114 +0,0 @@
-# Systemd services manipulation.
-#
-# This module can enable services and targets for systemd
-# (if packaging doesn't already do that). It can calso
-# disable services (but not targets).
-#
-# First, services are enabled; then targets; then services
-# are disabled -- this order of operations is fixed.
----
-
-# There are three configuration keys for this module:
-# *services*, *targets* and *disable*. The value of each
-# key is a list of entries. Each entry has two keys:
-#   - *name* is the (string) name of the service or target that is being
-#     changed. Use quotes. Don't include ".target" or ".service"
-#     in the name.
-#   - *mandatory* is a boolean option, which states whether the change
-#     must be done successfully. If systemd reports an error while changing
-#     a mandatory entry, the installation will fail. When mandatory is false,
-#     errors for that entry (service or target) are ignored. If mandatory
-#     is not specified, the default is false.
-#
-# An entry may also be given as a single string, which is then
-# interpreted as the name of the service. In this case, mandatory
-# is also set to the default of false.
-#
-# Use [] to express an empty list.
-
-# # This example enables NetworkManager (and fails if it can't),
-# # disables cups (and ignores failure). Then it enables the
-# # graphical target (e.g. so that SDDM runs for login), and
-# # finally disables pacman-init (an ArchLinux-only service).
-# #
-# # Enables <name>.service
-# services:
-#   - name: "NetworkManager"
-#     mandatory: true
-#   - name: "cups"
-#     mandatory: false
-#
-# # Enables <name>.target
-# targets:
-#   - name: "graphical"
-#     mandatory: true
-#
-# # Disables <name>.service
-# disable:
-#   - name: "pacman-init"
-#     mandatory: false
-#
-# # Disables <name>.target
-# #     .. this shows how to use just the name
-# disable-targets:
-#   - graphical
-#
-# # Masks (stronger version of disable). This section
-# # is unusual because you **must** include the suffix
-# # (e.g. ".service") as part of the name, so, e.g. to mask
-# # NetworkManager (rather than just disable it) you must
-# # specify "NetworkManager.service" as name.
-# mask:
-#  - name: "NetworkManager.service"
-#  - mandatory: true
-
-# By default, no changes are made.
-#services: []
-#targets: []
-#disable: []
-disable-targets: []
-
-# Manjaro settings
-
-services:
-  - name: "NetworkManager"
-    mandatory: false
-
-  - name: "org.cups.cupsd"
-    mandatory: false
-
-  - name: "lightdm-plymouth"
-    mandatory: false
-
-  - name: "pacman-init"
-    mandatory: false
-
-  - name: "tlp"
-    mandatory: false
-
-  - name: "tlp-sleep"
-    mandatory: false
-
-  - name: "snapd.apparmor"
-    mandatory: false
-
-  - name: "apparmor"
-    mandatory: false
-
-  - name: "snapd"
-    mandatory: false
-
-targets:
-  - name: "graphical"
-    mandatory: true
-
-disable:
-  - name: "dhcpcd"
-    mandatory: false
-
-mask:
-  - name: "systemd-rfkill"
-    mandatory: false
-
-  - name: "systemd-rfkill.socket"
-    mandatory: false

diff --git a/channels/serene/airootfs.x86_64/usr/share/calamares/modules/services.conf b/channels/serene/airootfs.x86_64/usr/share/calamares/modules/services.conf
deleted file mode 100644 (file)
index ece1eda..0000000
--- a/channels/serene/airootfs.x86_64/usr/share/calamares/modules/services.conf
+++ /dev/null
@@ -1,114 +0,0 @@
-# Systemd services manipulation.
-#
-# This module can enable services and targets for systemd
-# (if packaging doesn't already do that). It can calso
-# disable services (but not targets).
-#
-# First, services are enabled; then targets; then services
-# are disabled -- this order of operations is fixed.
----
-
-# There are three configuration keys for this module:
-# *services*, *targets* and *disable*. The value of each
-# key is a list of entries. Each entry has two keys:
-#   - *name* is the (string) name of the service or target that is being
-#     changed. Use quotes. Don't include ".target" or ".service"
-#     in the name.
-#   - *mandatory* is a boolean option, which states whether the change
-#     must be done successfully. If systemd reports an error while changing
-#     a mandatory entry, the installation will fail. When mandatory is false,
-#     errors for that entry (service or target) are ignored. If mandatory
-#     is not specified, the default is false.
-#
-# An entry may also be given as a single string, which is then
-# interpreted as the name of the service. In this case, mandatory
-# is also set to the default of false.
-#
-# Use [] to express an empty list.
-
-# # This example enables NetworkManager (and fails if it can't),
-# # disables cups (and ignores failure). Then it enables the
-# # graphical target (e.g. so that SDDM runs for login), and
-# # finally disables pacman-init (an ArchLinux-only service).
-# #
-# # Enables <name>.service
-# services:
-#   - name: "NetworkManager"
-#     mandatory: true
-#   - name: "cups"
-#     mandatory: false
-#
-# # Enables <name>.target
-# targets:
-#   - name: "graphical"
-#     mandatory: true
-#
-# # Disables <name>.service
-# disable:
-#   - name: "pacman-init"
-#     mandatory: false
-#
-# # Disables <name>.target
-# #     .. this shows how to use just the name
-# disable-targets:
-#   - graphical
-#
-# # Masks (stronger version of disable). This section
-# # is unusual because you **must** include the suffix
-# # (e.g. ".service") as part of the name, so, e.g. to mask
-# # NetworkManager (rather than just disable it) you must
-# # specify "NetworkManager.service" as name.
-# mask:
-#  - name: "NetworkManager.service"
-#  - mandatory: true
-
-# By default, no changes are made.
-#services: []
-#targets: []
-#disable: []
-disable-targets: []
-
-# Manjaro settings
-
-services:
-  - name: "NetworkManager"
-    mandatory: false
-
-  - name: "org.cups.cupsd"
-    mandatory: false
-
-  - name: "lightdm"
-    mandatory: false
-
-  - name: "pacman-init"
-    mandatory: false
-
-  - name: "tlp"
-    mandatory: false
-
-  - name: "tlp-sleep"
-    mandatory: false
-
-  - name: "snapd.apparmor"
-    mandatory: false
-
-  - name: "apparmor"
-    mandatory: false
-
-  - name: "snapd"
-    mandatory: false
-
-targets:
-  - name: "graphical"
-    mandatory: true
-
-disable:
-  - name: "dhcpcd"
-    mandatory: false
-
-mask:
-  - name: "systemd-rfkill"
-    mandatory: false
-
-  - name: "systemd-rfkill.socket"
-    mandatory: false

diff --git a/channels/xfce-pro/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf b/channels/xfce-pro/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf
deleted file mode 100644 (file)
index 8bacf64..0000000
--- a/channels/xfce-pro/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf
+++ /dev/null
@@ -1,114 +0,0 @@
-# Systemd services manipulation.
-#
-# This module can enable services and targets for systemd
-# (if packaging doesn't already do that). It can calso
-# disable services (but not targets).
-#
-# First, services are enabled; then targets; then services
-# are disabled -- this order of operations is fixed.
----
-
-# There are three configuration keys for this module:
-# *services*, *targets* and *disable*. The value of each
-# key is a list of entries. Each entry has two keys:
-#   - *name* is the (string) name of the service or target that is being
-#     changed. Use quotes. Don't include ".target" or ".service"
-#     in the name.
-#   - *mandatory* is a boolean option, which states whether the change
-#     must be done successfully. If systemd reports an error while changing
-#     a mandatory entry, the installation will fail. When mandatory is false,
-#     errors for that entry (service or target) are ignored. If mandatory
-#     is not specified, the default is false.
-#
-# An entry may also be given as a single string, which is then
-# interpreted as the name of the service. In this case, mandatory
-# is also set to the default of false.
-#
-# Use [] to express an empty list.
-
-# # This example enables NetworkManager (and fails if it can't),
-# # disables cups (and ignores failure). Then it enables the
-# # graphical target (e.g. so that SDDM runs for login), and
-# # finally disables pacman-init (an ArchLinux-only service).
-# #
-# # Enables <name>.service
-# services:
-#   - name: "NetworkManager"
-#     mandatory: true
-#   - name: "cups"
-#     mandatory: false
-#
-# # Enables <name>.target
-# targets:
-#   - name: "graphical"
-#     mandatory: true
-#
-# # Disables <name>.service
-# disable:
-#   - name: "pacman-init"
-#     mandatory: false
-#
-# # Disables <name>.target
-# #     .. this shows how to use just the name
-# disable-targets:
-#   - graphical
-#
-# # Masks (stronger version of disable). This section
-# # is unusual because you **must** include the suffix
-# # (e.g. ".service") as part of the name, so, e.g. to mask
-# # NetworkManager (rather than just disable it) you must
-# # specify "NetworkManager.service" as name.
-# mask:
-#  - name: "NetworkManager.service"
-#  - mandatory: true
-
-# By default, no changes are made.
-#services: []
-#targets: []
-#disable: []
-disable-targets: []
-
-# Manjaro settings
-
-services:
-  - name: "NetworkManager"
-    mandatory: false
-
-  - name: "org.cups.cupsd"
-    mandatory: false
-
-  - name: "lightdm-plymouth"
-    mandatory: false
-
-  - name: "pacman-init"
-    mandatory: false
-
-  - name: "tlp"
-    mandatory: false
-
-  - name: "tlp-sleep"
-    mandatory: false
-
-  - name: "snapd.apparmor"
-    mandatory: false
-
-  - name: "apparmor"
-    mandatory: false
-
-  - name: "snapd"
-    mandatory: false
-
-targets:
-  - name: "graphical"
-    mandatory: true
-
-disable:
-  - name: "dhcpcd"
-    mandatory: false
-
-mask:
-  - name: "systemd-rfkill"
-    mandatory: false
-
-  - name: "systemd-rfkill.socket"
-    mandatory: false

diff --git a/channels/xfce-pro/airootfs.x86_64/usr/share/calamares/modules/services.conf b/channels/xfce-pro/airootfs.x86_64/usr/share/calamares/modules/services.conf
deleted file mode 100644 (file)
index ece1eda..0000000
--- a/channels/xfce-pro/airootfs.x86_64/usr/share/calamares/modules/services.conf
+++ /dev/null
@@ -1,114 +0,0 @@
-# Systemd services manipulation.
-#
-# This module can enable services and targets for systemd
-# (if packaging doesn't already do that). It can calso
-# disable services (but not targets).
-#
-# First, services are enabled; then targets; then services
-# are disabled -- this order of operations is fixed.
----
-
-# There are three configuration keys for this module:
-# *services*, *targets* and *disable*. The value of each
-# key is a list of entries. Each entry has two keys:
-#   - *name* is the (string) name of the service or target that is being
-#     changed. Use quotes. Don't include ".target" or ".service"
-#     in the name.
-#   - *mandatory* is a boolean option, which states whether the change
-#     must be done successfully. If systemd reports an error while changing
-#     a mandatory entry, the installation will fail. When mandatory is false,
-#     errors for that entry (service or target) are ignored. If mandatory
-#     is not specified, the default is false.
-#
-# An entry may also be given as a single string, which is then
-# interpreted as the name of the service. In this case, mandatory
-# is also set to the default of false.
-#
-# Use [] to express an empty list.
-
-# # This example enables NetworkManager (and fails if it can't),
-# # disables cups (and ignores failure). Then it enables the
-# # graphical target (e.g. so that SDDM runs for login), and
-# # finally disables pacman-init (an ArchLinux-only service).
-# #
-# # Enables <name>.service
-# services:
-#   - name: "NetworkManager"
-#     mandatory: true
-#   - name: "cups"
-#     mandatory: false
-#
-# # Enables <name>.target
-# targets:
-#   - name: "graphical"
-#     mandatory: true
-#
-# # Disables <name>.service
-# disable:
-#   - name: "pacman-init"
-#     mandatory: false
-#
-# # Disables <name>.target
-# #     .. this shows how to use just the name
-# disable-targets:
-#   - graphical
-#
-# # Masks (stronger version of disable). This section
-# # is unusual because you **must** include the suffix
-# # (e.g. ".service") as part of the name, so, e.g. to mask
-# # NetworkManager (rather than just disable it) you must
-# # specify "NetworkManager.service" as name.
-# mask:
-#  - name: "NetworkManager.service"
-#  - mandatory: true
-
-# By default, no changes are made.
-#services: []
-#targets: []
-#disable: []
-disable-targets: []
-
-# Manjaro settings
-
-services:
-  - name: "NetworkManager"
-    mandatory: false
-
-  - name: "org.cups.cupsd"
-    mandatory: false
-
-  - name: "lightdm"
-    mandatory: false
-
-  - name: "pacman-init"
-    mandatory: false
-
-  - name: "tlp"
-    mandatory: false
-
-  - name: "tlp-sleep"
-    mandatory: false
-
-  - name: "snapd.apparmor"
-    mandatory: false
-
-  - name: "apparmor"
-    mandatory: false
-
-  - name: "snapd"
-    mandatory: false
-
-targets:
-  - name: "graphical"
-    mandatory: true
-
-disable:
-  - name: "dhcpcd"
-    mandatory: false
-
-mask:
-  - name: "systemd-rfkill"
-    mandatory: false
-
-  - name: "systemd-rfkill.socket"
-    mandatory: false

diff --git a/channels/xfce/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf b/channels/xfce/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf
deleted file mode 100644 (file)
index 8bacf64..0000000
--- a/channels/xfce/airootfs.x86_64/usr/share/calamares/modules/services-plymouth.conf
+++ /dev/null
@@ -1,114 +0,0 @@
-# Systemd services manipulation.
-#
-# This module can enable services and targets for systemd
-# (if packaging doesn't already do that). It can calso
-# disable services (but not targets).
-#
-# First, services are enabled; then targets; then services
-# are disabled -- this order of operations is fixed.
----
-
-# There are three configuration keys for this module:
-# *services*, *targets* and *disable*. The value of each
-# key is a list of entries. Each entry has two keys:
-#   - *name* is the (string) name of the service or target that is being
-#     changed. Use quotes. Don't include ".target" or ".service"
-#     in the name.
-#   - *mandatory* is a boolean option, which states whether the change
-#     must be done successfully. If systemd reports an error while changing
-#     a mandatory entry, the installation will fail. When mandatory is false,
-#     errors for that entry (service or target) are ignored. If mandatory
-#     is not specified, the default is false.
-#
-# An entry may also be given as a single string, which is then
-# interpreted as the name of the service. In this case, mandatory
-# is also set to the default of false.
-#
-# Use [] to express an empty list.
-
-# # This example enables NetworkManager (and fails if it can't),
-# # disables cups (and ignores failure). Then it enables the
-# # graphical target (e.g. so that SDDM runs for login), and
-# # finally disables pacman-init (an ArchLinux-only service).
-# #
-# # Enables <name>.service
-# services:
-#   - name: "NetworkManager"
-#     mandatory: true
-#   - name: "cups"
-#     mandatory: false
-#
-# # Enables <name>.target
-# targets:
-#   - name: "graphical"
-#     mandatory: true
-#
-# # Disables <name>.service
-# disable:
-#   - name: "pacman-init"
-#     mandatory: false
-#
-# # Disables <name>.target
-# #     .. this shows how to use just the name
-# disable-targets:
-#   - graphical
-#
-# # Masks (stronger version of disable). This section
-# # is unusual because you **must** include the suffix
-# # (e.g. ".service") as part of the name, so, e.g. to mask
-# # NetworkManager (rather than just disable it) you must
-# # specify "NetworkManager.service" as name.
-# mask:
-#  - name: "NetworkManager.service"
-#  - mandatory: true
-
-# By default, no changes are made.
-#services: []
-#targets: []
-#disable: []
-disable-targets: []
-
-# Manjaro settings
-
-services:
-  - name: "NetworkManager"
-    mandatory: false
-
-  - name: "org.cups.cupsd"
-    mandatory: false
-
-  - name: "lightdm-plymouth"
-    mandatory: false
-
-  - name: "pacman-init"
-    mandatory: false
-
-  - name: "tlp"
-    mandatory: false
-
-  - name: "tlp-sleep"
-    mandatory: false
-
-  - name: "snapd.apparmor"
-    mandatory: false
-
-  - name: "apparmor"
-    mandatory: false
-
-  - name: "snapd"
-    mandatory: false
-
-targets:
-  - name: "graphical"
-    mandatory: true
-
-disable:
-  - name: "dhcpcd"
-    mandatory: false
-
-mask:
-  - name: "systemd-rfkill"
-    mandatory: false
-
-  - name: "systemd-rfkill.socket"
-    mandatory: false

diff --git a/channels/xfce/airootfs.x86_64/usr/share/calamares/modules/services.conf b/channels/xfce/airootfs.x86_64/usr/share/calamares/modules/services.conf
deleted file mode 100644 (file)
index ece1eda..0000000
--- a/channels/xfce/airootfs.x86_64/usr/share/calamares/modules/services.conf
+++ /dev/null
@@ -1,114 +0,0 @@
-# Systemd services manipulation.
-#
-# This module can enable services and targets for systemd
-# (if packaging doesn't already do that). It can calso
-# disable services (but not targets).
-#
-# First, services are enabled; then targets; then services
-# are disabled -- this order of operations is fixed.
----
-
-# There are three configuration keys for this module:
-# *services*, *targets* and *disable*. The value of each
-# key is a list of entries. Each entry has two keys:
-#   - *name* is the (string) name of the service or target that is being
-#     changed. Use quotes. Don't include ".target" or ".service"
-#     in the name.
-#   - *mandatory* is a boolean option, which states whether the change
-#     must be done successfully. If systemd reports an error while changing
-#     a mandatory entry, the installation will fail. When mandatory is false,
-#     errors for that entry (service or target) are ignored. If mandatory
-#     is not specified, the default is false.
-#
-# An entry may also be given as a single string, which is then
-# interpreted as the name of the service. In this case, mandatory
-# is also set to the default of false.
-#
-# Use [] to express an empty list.
-
-# # This example enables NetworkManager (and fails if it can't),
-# # disables cups (and ignores failure). Then it enables the
-# # graphical target (e.g. so that SDDM runs for login), and
-# # finally disables pacman-init (an ArchLinux-only service).
-# #
-# # Enables <name>.service
-# services:
-#   - name: "NetworkManager"
-#     mandatory: true
-#   - name: "cups"
-#     mandatory: false
-#
-# # Enables <name>.target
-# targets:
-#   - name: "graphical"
-#     mandatory: true
-#
-# # Disables <name>.service
-# disable:
-#   - name: "pacman-init"
-#     mandatory: false
-#
-# # Disables <name>.target
-# #     .. this shows how to use just the name
-# disable-targets:
-#   - graphical
-#
-# # Masks (stronger version of disable). This section
-# # is unusual because you **must** include the suffix
-# # (e.g. ".service") as part of the name, so, e.g. to mask
-# # NetworkManager (rather than just disable it) you must
-# # specify "NetworkManager.service" as name.
-# mask:
-#  - name: "NetworkManager.service"
-#  - mandatory: true
-
-# By default, no changes are made.
-#services: []
-#targets: []
-#disable: []
-disable-targets: []
-
-# Manjaro settings
-
-services:
-  - name: "NetworkManager"
-    mandatory: false
-
-  - name: "org.cups.cupsd"
-    mandatory: false
-
-  - name: "lightdm"
-    mandatory: false
-
-  - name: "pacman-init"
-    mandatory: false
-
-  - name: "tlp"
-    mandatory: false
-
-  - name: "tlp-sleep"
-    mandatory: false
-
-  - name: "snapd.apparmor"
-    mandatory: false
-
-  - name: "apparmor"
-    mandatory: false
-
-  - name: "snapd"
-    mandatory: false
-
-targets:
-  - name: "graphical"
-    mandatory: true
-
-disable:
-  - name: "dhcpcd"
-    mandatory: false
-
-mask:
-  - name: "systemd-rfkill"
-    mandatory: false
-
-  - name: "systemd-rfkill.socket"
-    mandatory: false