ASoC: cs42l51: add support of master mode

Add support of master mode for cs42l51 cirrus audio codec.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c
index 9b3ffa1..397b689 100644 (file)
--- a/sound/soc/codecs/cs42l51.c
+++ b/sound/soc/codecs/cs42l51.c
@@ -340,6 +340,19 @@ static struct cs42l51_ratios slave_auto_ratios[] = {
        {  256, CS42L51_DSM_MODE, 1 }, {  384, CS42L51_DSM_MODE, 1 },
 };
 
+/*
+ * Master mode mclk/fs ratios.
+ * Recommended configurations are SSM for 4-50khz and DSM for 50-100kHz ranges
+ * The table below provides support of following ratios:
+ * 128: SSM (%128) with div2 disabled
+ * 256: SSM (%128) with div2 enabled
+ * In both cases, if sampling rate is above 50kHz, SSM is overridden
+ * with DSM (%128) configuration
+ */
+static struct cs42l51_ratios master_ratios[] = {
+       { 128, CS42L51_SSM_MODE, 0 }, { 256, CS42L51_SSM_MODE, 1 },
+};
+
 static int cs42l51_set_dai_sysclk(struct snd_soc_dai *codec_dai,
                int clk_id, unsigned int freq, int dir)
 {
@@ -362,11 +375,13 @@ static int cs42l51_hw_params(struct snd_pcm_substream *substream,
        unsigned int ratio;
        struct cs42l51_ratios *ratios = NULL;
        int nr_ratios = 0;
-       int intf_ctl, power_ctl, fmt;
+       int intf_ctl, power_ctl, fmt, mode;
 
        switch (cs42l51->func) {
        case MODE_MASTER:
-               return -EINVAL;
+               ratios = master_ratios;
+               nr_ratios = ARRAY_SIZE(master_ratios);
+               break;
        case MODE_SLAVE:
                ratios = slave_ratios;
                nr_ratios = ARRAY_SIZE(slave_ratios);
@@ -402,7 +417,16 @@ static int cs42l51_hw_params(struct snd_pcm_substream *substream,
        switch (cs42l51->func) {
        case MODE_MASTER:
                intf_ctl |= CS42L51_INTF_CTL_MASTER;
-               power_ctl |= CS42L51_MIC_POWER_CTL_SPEED(ratios[i].speed_mode);
+               mode = ratios[i].speed_mode;
+               /* Force DSM mode if sampling rate is above 50kHz */
+               if (rate > 50000)
+                       mode = CS42L51_DSM_MODE;
+               power_ctl |= CS42L51_MIC_POWER_CTL_SPEED(mode);
+               /*
+                * Auto detect mode is not applicable for master mode and has to
+                * be disabled. Otherwise SPEED[1:0] bits will be ignored.
+                */
+               power_ctl &= ~CS42L51_MIC_POWER_CTL_AUTO;
                break;
        case MODE_SLAVE:
                power_ctl |= CS42L51_MIC_POWER_CTL_SPEED(ratios[i].speed_mode);