atmel: move under atmel vendor directory

Part of reorganising wireless drivers directory and Kconfig.

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/MAINTAINERS b/MAINTAINERS
index f1adb66..2f3ea01 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1992,7 +1992,7 @@ L:        linux-wireless@vger.kernel.org
 W:     http://www.thekelleys.org.uk/atmel
 W:     http://atmelwlandriver.sourceforge.net/
 S:     Maintained
-F:     drivers/net/wireless/atmel*
+F:     drivers/net/wireless/atmel/atmel*
 
 ATMEL MAXTOUCH DRIVER
 M:     Nick Dyer <nick.dyer@itdev.co.uk>

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index ce5211b..275b6ed 100644 (file)
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -18,6 +18,7 @@ menuconfig WLAN
 if WLAN
 
 source "drivers/net/wireless/admtek/Kconfig"
+source "drivers/net/wireless/atmel/Kconfig"
 source "drivers/net/wireless/cisco/Kconfig"
 
 config PCMCIA_RAYCS
@@ -54,49 +55,6 @@ config LIBERTAS_THINFIRM_USB
        ---help---
          A driver for Marvell Libertas 8388 USB devices using thinfirm.
 
-config ATMEL
-      tristate "Atmel at76c50x chipset  802.11b support"
-      depends on CFG80211 && (PCI || PCMCIA)
-      select WIRELESS_EXT
-      select WEXT_PRIV
-      select FW_LOADER
-      select CRC32
-       ---help---
-        A driver 802.11b wireless cards based on the Atmel fast-vnet
-        chips. This driver supports standard Linux wireless extensions.
-
-        Many  cards based on this chipset do not have flash memory
-        and need their firmware loaded at start-up. If yours is
-        one of these, you will need to provide a firmware image
-        to be loaded into the card by the driver. The Atmel
-        firmware package can be downloaded from
-        <http://www.thekelleys.org.uk/atmel>
-
-config PCI_ATMEL
-      tristate "Atmel at76c506 PCI cards"
-      depends on ATMEL && PCI
-       ---help---
-        Enable support for PCI and mini-PCI cards containing the
-        Atmel at76c506 chip.
-
-config PCMCIA_ATMEL
-       tristate "Atmel at76c502/at76c504 PCMCIA cards"
-       depends on ATMEL && PCMCIA
-       select WIRELESS_EXT
-       select FW_LOADER
-       select CRC32
-       ---help---
-         Enable support for PCMCIA cards containing the
-         Atmel at76c502 and at76c504 chips.
-
-config AT76C50X_USB
-        tristate "Atmel at76c503/at76c505/at76c505a USB cards"
-        depends on MAC80211 && USB
-        select FW_LOADER
-        ---help---
-          Enable support for USB Wireless devices using Atmel at76c503,
-          at76c505 or at76c505a chips.
-
 config PCMCIA_WL3501
        tristate "Planet WL3501 PCMCIA cards"
        depends on CFG80211 && PCMCIA

diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 853294d..87eb6b2 100644 (file)
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/
+obj-$(CONFIG_WLAN_VENDOR_ATMEL) += atmel/
 obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/
 
 obj-$(CONFIG_IPW2100) += ipw2x00/
@@ -10,12 +11,6 @@ obj-$(CONFIG_IPW2200) += ipw2x00/
 
 obj-$(CONFIG_HERMES)           += orinoco/
 
-obj-$(CONFIG_ATMEL)             += atmel.o
-obj-$(CONFIG_PCI_ATMEL)         += atmel_pci.o 
-obj-$(CONFIG_PCMCIA_ATMEL)      += atmel_cs.o
-
-obj-$(CONFIG_AT76C50X_USB)      += at76c50x-usb.o
-
 obj-$(CONFIG_PRISM54)          += prism54/
 
 obj-$(CONFIG_HOSTAP)           += hostap/

diff --git a/drivers/net/wireless/atmel/Kconfig b/drivers/net/wireless/atmel/Kconfig
new file mode 100644 (file)
index 0000000..a43cfd1
--- /dev/null
+++ b/drivers/net/wireless/atmel/Kconfig
@@ -0,0 +1,57 @@
+config WLAN_VENDOR_ATMEL
+       bool "Atmel devices"
+       default y
+       ---help---
+         If you have a wireless card belonging to this class, say Y.
+
+         Note that the answer to this question doesn't directly affect the
+         kernel: saying N will just cause the configurator to skip all
+         the questions about  cards. If you say Y, you will be asked for
+         your specific card in the following questions.
+
+if WLAN_VENDOR_ATMEL
+
+config ATMEL
+      tristate "Atmel at76c50x chipset  802.11b support"
+      depends on CFG80211 && (PCI || PCMCIA)
+      select WIRELESS_EXT
+      select WEXT_PRIV
+      select FW_LOADER
+      select CRC32
+       ---help---
+        A driver 802.11b wireless cards based on the Atmel fast-vnet
+        chips. This driver supports standard Linux wireless extensions.
+
+        Many  cards based on this chipset do not have flash memory
+        and need their firmware loaded at start-up. If yours is
+        one of these, you will need to provide a firmware image
+        to be loaded into the card by the driver. The Atmel
+        firmware package can be downloaded from
+        <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+      tristate "Atmel at76c506 PCI cards"
+      depends on ATMEL && PCI
+       ---help---
+        Enable support for PCI and mini-PCI cards containing the
+        Atmel at76c506 chip.
+
+config PCMCIA_ATMEL
+       tristate "Atmel at76c502/at76c504 PCMCIA cards"
+       depends on ATMEL && PCMCIA
+       select WIRELESS_EXT
+       select FW_LOADER
+       select CRC32
+       ---help---
+         Enable support for PCMCIA cards containing the
+         Atmel at76c502 and at76c504 chips.
+
+config AT76C50X_USB
+        tristate "Atmel at76c503/at76c505/at76c505a USB cards"
+        depends on MAC80211 && USB
+        select FW_LOADER
+        ---help---
+          Enable support for USB Wireless devices using Atmel at76c503,
+          at76c505 or at76c505a chips.
+
+endif # WLAN_VENDOR_ATMEL

diff --git a/drivers/net/wireless/atmel/Makefile b/drivers/net/wireless/atmel/Makefile
new file mode 100644 (file)
index 0000000..e62e345
--- /dev/null
+++ b/drivers/net/wireless/atmel/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_ATMEL)             += atmel.o
+obj-$(CONFIG_PCI_ATMEL)         += atmel_pci.o 
+obj-$(CONFIG_PCMCIA_ATMEL)      += atmel_cs.o
+
+obj-$(CONFIG_AT76C50X_USB)      += at76c50x-usb.o

diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/atmel/at76c50x-usb.c
similarity index 100%
rename from drivers/net/wireless/at76c50x-usb.c
rename to drivers/net/wireless/atmel/at76c50x-usb.c

diff --git a/drivers/net/wireless/at76c50x-usb.h b/drivers/net/wireless/atmel/at76c50x-usb.h
similarity index 100%
rename from drivers/net/wireless/at76c50x-usb.h
rename to drivers/net/wireless/atmel/at76c50x-usb.h

diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel/atmel.c
similarity index 100%
rename from drivers/net/wireless/atmel.c
rename to drivers/net/wireless/atmel/atmel.c

diff --git a/drivers/net/wireless/atmel.h b/drivers/net/wireless/atmel/atmel.h
similarity index 100%
rename from drivers/net/wireless/atmel.h
rename to drivers/net/wireless/atmel/atmel.h

diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel/atmel_cs.c
similarity index 100%
rename from drivers/net/wireless/atmel_cs.c
rename to drivers/net/wireless/atmel/atmel_cs.c

diff --git a/drivers/net/wireless/atmel_pci.c b/drivers/net/wireless/atmel/atmel_pci.c
similarity index 100%
rename from drivers/net/wireless/atmel_pci.c
rename to drivers/net/wireless/atmel/atmel_pci.c