OSDN Git Service

aspeed/scu: Fix W1C behavior
authorJoel Stanley <joel@jms.id.au>
Tue, 19 Nov 2019 14:12:01 +0000 (15:12 +0100)
committerPeter Maydell <peter.maydell@linaro.org>
Mon, 16 Dec 2019 10:46:34 +0000 (10:46 +0000)
This models the clock write one to clear registers, and fixes up some
incorrect behavior in all of the write to clear registers.

There was also a typo in one of the register definitions.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20191119141211.25716-8-clg@kaod.org
[clg: checkpatch.pl fixes ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/misc/aspeed_scu.c

index 717509b..f62fa25 100644 (file)
@@ -98,7 +98,7 @@
 #define AST2600_CLK_STOP_CTRL     TO_REG(0x80)
 #define AST2600_CLK_STOP_CTRL_CLR TO_REG(0x84)
 #define AST2600_CLK_STOP_CTRL2     TO_REG(0x90)
-#define AST2600_CLK_STOP_CTR2L_CLR TO_REG(0x94)
+#define AST2600_CLK_STOP_CTRL2_CLR TO_REG(0x94)
 #define AST2600_SDRAM_HANDSHAKE   TO_REG(0x100)
 #define AST2600_HPLL_PARAM        TO_REG(0x200)
 #define AST2600_HPLL_EXT          TO_REG(0x204)
@@ -532,11 +532,13 @@ static uint64_t aspeed_ast2600_scu_read(void *opaque, hwaddr offset,
     return s->regs[reg];
 }
 
-static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, uint64_t data,
-                                     unsigned size)
+static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset,
+                                     uint64_t data64, unsigned size)
 {
     AspeedSCUState *s = ASPEED_SCU(opaque);
     int reg = TO_REG(offset);
+    /* Truncate here so bitwise operations below behave as expected */
+    uint32_t data = data64;
 
     if (reg >= ASPEED_AST2600_SCU_NR_REGS) {
         qemu_log_mask(LOG_GUEST_ERROR,
@@ -563,15 +565,22 @@ static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, uint64_t data,
         /* fall through */
     case AST2600_SYS_RST_CTRL:
     case AST2600_SYS_RST_CTRL2:
+    case AST2600_CLK_STOP_CTRL:
+    case AST2600_CLK_STOP_CTRL2:
         /* W1S (Write 1 to set) registers */
         s->regs[reg] |= data;
         return;
     case AST2600_SYS_RST_CTRL_CLR:
     case AST2600_SYS_RST_CTRL2_CLR:
+    case AST2600_CLK_STOP_CTRL_CLR:
+    case AST2600_CLK_STOP_CTRL2_CLR:
     case AST2600_HW_STRAP1_CLR:
     case AST2600_HW_STRAP2_CLR:
-        /* W1C (Write 1 to clear) registers */
-        s->regs[reg] &= ~data;
+        /*
+         * W1C (Write 1 to clear) registers are offset by one address from
+         * the data register
+         */
+        s->regs[reg - 1] &= ~data;
         return;
 
     case AST2600_RNG_DATA: