Default: 0
+ps_retrans - INTEGER
+ Primary.Switchover.Max.Retrans (PSMR), it's a tunable parameter coming
+ from section-5 "Primary Path Switchover" in rfc7829. The primary path
+ will be changed to another active path when the path error counter on
+ the old primary path exceeds PSMR, so that "the SCTP sender is allowed
+ to continue data transmission on a new working path even when the old
+ primary destination address becomes active again". Note this feature
+ is disabled by initializing 'ps_retrans' per netns as 0xffff by default,
+ and its value can't be less than 'pf_retrans' when changing by sysctl.
+
+ Default: 0xffff
+
rto_initial - INTEGER
The initial round trip timeout value in milliseconds that will be used
in calculating round trip times. This is the initial time interval
*/
int pf_retrans;
+ /* Primary.Switchover.Max.Retrans sysctl value
+ * taken from:
+ * https://tools.ietf.org/html/rfc7829
+ */
+ int ps_retrans;
+
/*
* Disable Potentially-Failed feature, the feature is enabled by default
* pf_enable - 0 : disable pf
};
#define SCTP_PF_EXPOSE_MAX SCTP_PF_EXPOSE_ENABLE
+#define SCTP_PS_RETRANS_MAX 0xffff
+
/* These return values describe the success or failure of a number of
* routines which form the lower interface to SCTP_outqueue.
*/
__u32 flowlabel;
__u8 dscp;
- int pf_retrans;
+ __u16 pf_retrans;
+ __u16 ps_retrans;
/* The initial Path MTU to use for new associations. */
__u32 pathmtu;
* and will be initialized from the assocs value. This can be changed
* using the SCTP_PEER_ADDR_THLDS socket option
*/
- int pf_retrans;
+ __u16 pf_retrans;
+ /* Used for primary path switchover. */
+ __u16 ps_retrans;
/* PMTU : The current known path MTU. */
__u32 pathmtu;
* and will be initialized from the assocs value. This can be
* changed using the SCTP_PEER_ADDR_THLDS socket option
*/
- int pf_retrans;
+ __u16 pf_retrans;
+ /* Used for primary path switchover. */
+ __u16 ps_retrans;
/* Maximum number of times the endpoint will retransmit INIT */
__u16 max_init_attempts;
*/
asoc->max_retrans = sp->assocparams.sasoc_asocmaxrxt;
asoc->pf_retrans = sp->pf_retrans;
+ asoc->ps_retrans = sp->ps_retrans;
asoc->pf_expose = sp->pf_expose;
asoc->rto_initial = msecs_to_jiffies(sp->rtoinfo.srto_initial);
/* And the partial failure retrans threshold */
peer->pf_retrans = asoc->pf_retrans;
+ /* And the primary path switchover retrans threshold */
+ peer->ps_retrans = asoc->ps_retrans;
/* Initialize the peer's SACK delay timeout based on the
* association configured value.
/* Max.Burst - 4 */
net->sctp.max_burst = SCTP_DEFAULT_MAX_BURST;
+ /* Disable of Primary Path Switchover by default */
+ net->sctp.ps_retrans = SCTP_PS_RETRANS_MAX;
+
/* Enable pf state by default */
net->sctp.pf_enable = 1;
SCTP_FAILED_THRESHOLD);
}
+ if (transport->error_count > transport->ps_retrans &&
+ asoc->peer.primary_path == transport &&
+ asoc->peer.active_path != transport)
+ sctp_assoc_set_primary(asoc, asoc->peer.active_path);
+
/* E2) For the destination address for which the timer
* expires, set RTO <- RTO * 2 ("back off the timer"). The
* maximum value discussed in rule C7 above (RTO.max) may be
sp->hbinterval = net->sctp.hb_interval;
sp->pathmaxrxt = net->sctp.max_retrans_path;
sp->pf_retrans = net->sctp.pf_retrans;
+ sp->ps_retrans = net->sctp.ps_retrans;
sp->pf_expose = net->sctp.pf_expose;
sp->pathmtu = 0; /* allow default discovery */
sp->sackdelay = net->sctp.sack_timeout;
static int rto_alpha_max = 1000;
static int rto_beta_max = 1000;
static int pf_expose_max = SCTP_PF_EXPOSE_MAX;
+static int ps_retrans_max = SCTP_PS_RETRANS_MAX;
static unsigned long max_autoclose_min = 0;
static unsigned long max_autoclose_max =
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
- .extra2 = SYSCTL_INT_MAX,
+ .extra2 = &init_net.sctp.ps_retrans,
+ },
+ {
+ .procname = "ps_retrans",
+ .data = &init_net.sctp.ps_retrans,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &init_net.sctp.pf_retrans,
+ .extra2 = &ps_retrans_max,
},
{
.procname = "sndbuf_policy",