OSDN Git Service

powerpc/85xx: Add T4240RDB board support
authorChunhe Lan <Chunhe.Lan@freescale.com>
Tue, 3 Jun 2014 10:25:14 +0000 (18:25 +0800)
committerScott Wood <scottwood@freescale.com>
Wed, 25 Jun 2014 23:49:35 +0000 (18:49 -0500)
T4240RDB board Specification
----------------------------
Memory subsystem:
     6GB DDR3
     128MB NOR flash
     2GB NAND flash
Ethernet:
     Eight 1G SGMII ports
     Four 10Gbps SFP+ ports
PCIe:
     Two PCIe slots
USB:
     Two USB2.0 Type A ports
SDHC:
     One SD-card port
SATA:
     One SATA port
UART:
     Dual RJ45 ports

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
arch/powerpc/boot/dts/t4240rdb.dts [new file with mode: 0644]
arch/powerpc/platforms/85xx/Kconfig
arch/powerpc/platforms/85xx/corenet_generic.c

diff --git a/arch/powerpc/boot/dts/t4240rdb.dts b/arch/powerpc/boot/dts/t4240rdb.dts
new file mode 100644 (file)
index 0000000..53761d4
--- /dev/null
@@ -0,0 +1,186 @@
+/*
+ * T4240RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in the
+ *      documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *      names of its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t4240si-pre.dtsi"
+
+/ {
+       model = "fsl,T4240RDB";
+       compatible = "fsl,T4240RDB";
+       #address-cells = <2>;
+       #size-cells = <2>;
+       interrupt-parent = <&mpic>;
+
+       ifc: localbus@ffe124000 {
+               reg = <0xf 0xfe124000 0 0x2000>;
+               ranges = <0 0 0xf 0xe8000000 0x08000000
+                         2 0 0xf 0xff800000 0x00010000
+                         3 0 0xf 0xffdf0000 0x00008000>;
+
+               nor@0,0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "cfi-flash";
+                       reg = <0x0 0x0 0x8000000>;
+
+                       bank-width = <2>;
+                       device-width = <1>;
+               };
+
+               nand@2,0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,ifc-nand";
+                       reg = <0x2 0x0 0x10000>;
+               };
+       };
+
+       memory {
+               device_type = "memory";
+       };
+
+       dcsr: dcsr@f00000000 {
+               ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+       };
+
+       soc: soc@ffe000000 {
+               ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+               reg = <0xf 0xfe000000 0 0x00001000>;
+               spi@110000 {
+                       flash@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "sst,sst25wf040";
+                               reg = <0>;
+                               spi-max-frequency = <40000000>; /* input clock */
+                       };
+               };
+
+               i2c@118000 {
+                       eeprom@52 {
+                               compatible = "at24,24c256";
+                               reg = <0x52>;
+                       };
+                       eeprom@54 {
+                               compatible = "at24,24c256";
+                               reg = <0x54>;
+                       };
+                       eeprom@56 {
+                               compatible = "at24,24c256";
+                               reg = <0x56>;
+                       };
+                       rtc@68 {
+                               compatible = "dallas,ds1374";
+                               reg = <0x68>;
+                               interrupts = <0x1 0x1 0 0>;
+                       };
+               };
+
+               sdhc@114000 {
+                       voltage-ranges = <1800 1800 3300 3300>;
+               };
+       };
+
+       pci0: pcie@ffe240000 {
+               reg = <0xf 0xfe240000 0 0x10000>;
+               ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+                         0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+               pcie@0 {
+                       ranges = <0x02000000 0 0xe0000000
+                                 0x02000000 0 0xe0000000
+                                 0 0x20000000
+
+                                 0x01000000 0 0x00000000
+                                 0x01000000 0 0x00000000
+                                 0 0x00010000>;
+               };
+       };
+
+       pci1: pcie@ffe250000 {
+               reg = <0xf 0xfe250000 0 0x10000>;
+               ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+                         0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+               pcie@0 {
+                       ranges = <0x02000000 0 0xe0000000
+                                 0x02000000 0 0xe0000000
+                                 0 0x20000000
+
+                                 0x01000000 0 0x00000000
+                                 0x01000000 0 0x00000000
+                                 0 0x00010000>;
+               };
+       };
+
+       pci2: pcie@ffe260000 {
+               reg = <0xf 0xfe260000 0 0x1000>;
+               ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+                         0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+               pcie@0 {
+                       ranges = <0x02000000 0 0xe0000000
+                                 0x02000000 0 0xe0000000
+                                 0 0x20000000
+
+                                 0x01000000 0 0x00000000
+                                 0x01000000 0 0x00000000
+                                 0 0x00010000>;
+               };
+       };
+
+       pci3: pcie@ffe270000 {
+               reg = <0xf 0xfe270000 0 0x10000>;
+               ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+                         0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+               pcie@0 {
+                       ranges = <0x02000000 0 0xe0000000
+                                 0x02000000 0 0xe0000000
+                                 0 0x20000000
+
+                                 0x01000000 0 0x00000000
+                                 0x01000000 0 0x00000000
+                                 0 0x00010000>;
+               };
+       };
+
+       rio: rapidio@ffe0c0000 {
+               reg = <0xf 0xfe0c0000 0 0x11000>;
+
+               port1 {
+                       ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+               };
+               port2 {
+                       ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+               };
+       };
+};
+
+/include/ "fsl/t4240si-post.dtsi"
index f442120..e3c2a42 100644 (file)
@@ -274,7 +274,7 @@ config CORENET_GENERIC
          For 32bit kernel, the following boards are supported:
            P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080
          For 64bit kernel, the following boards are supported:
-           T4240 QDS and B4 QDS
+           T4240 QDS/RDB and B4 QDS
          The following boards are supported for both 32bit and 64bit kernel:
            P5020 DS, P5040 DS and T104xQDS
 
index 5db1e11..69498c5 100644 (file)
@@ -120,6 +120,7 @@ static const char * const boards[] __initconst = {
        "fsl,P5020DS",
        "fsl,P5040DS",
        "fsl,T4240QDS",
+       "fsl,T4240RDB",
        "fsl,B4860QDS",
        "fsl,B4420QDS",
        "fsl,B4220QDS",
@@ -137,6 +138,7 @@ static const char * const hv_boards[] __initconst = {
        "fsl,P5020DS-hv",
        "fsl,P5040DS-hv",
        "fsl,T4240QDS-hv",
+       "fsl,T4240RDB-hv",
        "fsl,B4860QDS-hv",
        "fsl,B4420QDS-hv",
        "fsl,B4220QDS-hv",