OSDN Git Service

ARM: at91: remove at91rm9200 legacy boards files
authorNicolas Ferre <nicolas.ferre@atmel.com>
Fri, 21 Nov 2014 13:30:13 +0000 (14:30 +0100)
committerNicolas Ferre <nicolas.ferre@atmel.com>
Fri, 21 Nov 2014 16:35:14 +0000 (17:35 +0100)
Remove old board files that use at91rm9200 Atmel SoC. The
device tree is mature on this SoCs. It must be used now.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
14 files changed:
arch/arm/mach-at91/Makefile
arch/arm/mach-at91/board-1arm.c [deleted file]
arch/arm/mach-at91/board-carmeva.c [deleted file]
arch/arm/mach-at91/board-cpuat91.c [deleted file]
arch/arm/mach-at91/board-csb337.c [deleted file]
arch/arm/mach-at91/board-csb637.c [deleted file]
arch/arm/mach-at91/board-eb9200.c [deleted file]
arch/arm/mach-at91/board-ecbat91.c [deleted file]
arch/arm/mach-at91/board-eco920.c [deleted file]
arch/arm/mach-at91/board-kafa.c [deleted file]
arch/arm/mach-at91/board-kb9202.c [deleted file]
arch/arm/mach-at91/board-picotux200.c [deleted file]
arch/arm/mach-at91/board-rm9200ek.c [deleted file]
arch/arm/mach-at91/board-yl-9200.c [deleted file]

index b2495d7..016d9a1 100644 (file)
@@ -22,21 +22,6 @@ obj-$(CONFIG_SOC_SAMA5D4)    += sama5d4.o
 
 obj-$(CONFIG_ARCH_AT91RM9200)  += at91rm9200_devices.o
 
-# AT91RM9200 board-specific support
-obj-$(CONFIG_MACH_ONEARM)      += board-1arm.o
-obj-$(CONFIG_MACH_AT91RM9200EK)        += board-rm9200ek.o
-obj-$(CONFIG_MACH_CSB337)      += board-csb337.o
-obj-$(CONFIG_MACH_CSB637)      += board-csb637.o
-obj-$(CONFIG_MACH_CARMEVA)     += board-carmeva.o
-obj-$(CONFIG_MACH_KB9200)      += board-kb9202.o
-obj-$(CONFIG_MACH_ATEB9200)    += board-eb9200.o
-obj-$(CONFIG_MACH_KAFA)                += board-kafa.o
-obj-$(CONFIG_MACH_PICOTUX2XX)  += board-picotux200.o
-obj-$(CONFIG_MACH_ECBAT91)     += board-ecbat91.o
-obj-$(CONFIG_MACH_YL9200)      += board-yl-9200.o
-obj-$(CONFIG_MACH_CPUAT91)     += board-cpuat91.o
-obj-$(CONFIG_MACH_ECO920)      += board-eco920.o
-
 # AT91SAM board with device-tree
 obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
 obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
deleted file mode 100644 (file)
index 3f6dbcc..0000000
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-1arm.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-static void __init onearm_init_early(void)
-{
-       /* Set cpu type: PQFP */
-       at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-       /* Initialize processor: 18.432 MHz crystal */
-       at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata onearm_eth_data = {
-       .phy_irq_pin    = AT91_PIN_PC4,
-       .is_rmii        = 1,
-};
-
-static struct at91_usbh_data __initdata onearm_usbh_data = {
-       .ports          = 1,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata onearm_udc_data = {
-       .vbus_pin       = AT91_PIN_PC2,
-       .pullup_pin     = AT91_PIN_PC3,
-};
-
-static void __init onearm_board_init(void)
-{
-       /* Serial */
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-
-       /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
-       at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-       /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-       at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
-                          | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-                          | ATMEL_UART_RI);
-       at91_add_device_serial();
-       /* Ethernet */
-       at91_add_device_eth(&onearm_eth_data);
-       /* USB Host */
-       at91_add_device_usbh(&onearm_usbh_data);
-       /* USB Device */
-       at91_add_device_udc(&onearm_udc_data);
-}
-
-MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
-       /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = onearm_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = onearm_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
deleted file mode 100644 (file)
index 47313d3..0000000
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-carmeva.c
- *
- *  Copyright (c) 2005 Peer Georgi
- *                    Conitec Datasystems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init carmeva_init_early(void)
-{
-       /* Initialize processor: 20.000 MHz crystal */
-       at91_initialize(20000000);
-}
-
-static struct macb_platform_data __initdata carmeva_eth_data = {
-       .phy_irq_pin    = AT91_PIN_PC4,
-       .is_rmii        = 1,
-};
-
-static struct at91_usbh_data __initdata carmeva_usbh_data = {
-       .ports          = 2,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata carmeva_udc_data = {
-       .vbus_pin       = AT91_PIN_PD12,
-       .pullup_pin     = AT91_PIN_PD9,
-};
-
-/* FIXME: user dependent */
-// static struct at91_cf_data __initdata carmeva_cf_data = {
-//     .det_pin        = AT91_PIN_PB0,
-//     .rst_pin        = AT91_PIN_PC5,
-       // .irq_pin     = -EINVAL,
-       // .vcc_pin     = -EINVAL,
-// };
-
-static struct mci_platform_data __initdata carmeva_mci0_data = {
-       .slot[0] = {
-               .bus_width      = 4,
-               .detect_pin     = AT91_PIN_PB10,
-               .wp_pin         = AT91_PIN_PC14,
-       },
-};
-
-static struct spi_board_info carmeva_spi_devices[] = {
-       { /* DataFlash chip */
-               .modalias = "mtd_dataflash",
-               .chip_select  = 0,
-               .max_speed_hz = 10 * 1000 * 1000,
-       },
-       { /* User accessible spi - cs1 (250KHz) */
-               .modalias = "spi-cs1",
-               .chip_select  = 1,
-               .max_speed_hz = 250 *  1000,
-       },
-       { /* User accessible spi - cs2 (1MHz) */
-               .modalias = "spi-cs2",
-               .chip_select  = 2,
-               .max_speed_hz = 1 * 1000 *  1000,
-       },
-       { /* User accessible spi - cs3 (10MHz) */
-               .modalias = "spi-cs3",
-               .chip_select  = 3,
-               .max_speed_hz = 10 * 1000 *  1000,
-       },
-};
-
-static struct gpio_led carmeva_leds[] = {
-       { /* "user led 1", LED9 */
-               .name                   = "led9",
-               .gpio                   = AT91_PIN_PA21,
-               .active_low             = 1,
-               .default_trigger        = "heartbeat",
-       },
-       { /* "user led 2", LED10 */
-               .name                   = "led10",
-               .gpio                   = AT91_PIN_PA25,
-               .active_low             = 1,
-       },
-       { /* "user led 3", LED11 */
-               .name                   = "led11",
-               .gpio                   = AT91_PIN_PA26,
-               .active_low             = 1,
-       },
-       { /* "user led 4", LED12 */
-               .name                   = "led12",
-               .gpio                   = AT91_PIN_PA18,
-               .active_low             = 1,
-       }
-};
-
-static void __init carmeva_board_init(void)
-{
-       /* Serial */
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-
-       /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-       at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-                          | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-                          | ATMEL_UART_RI);
-       at91_add_device_serial();
-       /* Ethernet */
-       at91_add_device_eth(&carmeva_eth_data);
-       /* USB Host */
-       at91_add_device_usbh(&carmeva_usbh_data);
-       /* USB Device */
-       at91_add_device_udc(&carmeva_udc_data);
-       /* I2C */
-       at91_add_device_i2c(NULL, 0);
-       /* SPI */
-       at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
-       /* Compact Flash */
-//     at91_add_device_cf(&carmeva_cf_data);
-       /* MMC */
-       at91_add_device_mci(0, &carmeva_mci0_data);
-       /* LEDs */
-       at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
-}
-
-MACHINE_START(CARMEVA, "Carmeva")
-       /* Maintainer: Conitec Datasystems */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = carmeva_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = carmeva_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
deleted file mode 100644 (file)
index c094350..0000000
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-cpuat91.c
- *
- *  Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static struct gpio_led cpuat91_leds[] = {
-       {
-               .name                   = "led1",
-               .default_trigger        = "heartbeat",
-               .active_low             = 1,
-               .gpio                   = AT91_PIN_PC0,
-       },
-};
-
-static void __init cpuat91_init_early(void)
-{
-       /* Set cpu type: PQFP */
-       at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-       /* Initialize processor: 18.432 MHz crystal */
-       at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata cpuat91_eth_data = {
-       .phy_irq_pin    = -EINVAL,
-       .is_rmii        = 1,
-};
-
-static struct at91_usbh_data __initdata cpuat91_usbh_data = {
-       .ports          = 1,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata cpuat91_udc_data = {
-       .vbus_pin       = AT91_PIN_PC15,
-       .pullup_pin     = AT91_PIN_PC14,
-};
-
-static struct mci_platform_data __initdata cpuat91_mci0_data = {
-       .slot[0] = {
-               .bus_width      = 4,
-               .detect_pin     = AT91_PIN_PC2,
-               .wp_pin         = -EINVAL,
-       },
-};
-
-static struct physmap_flash_data cpuat91_flash_data = {
-       .width          = 2,
-};
-
-static struct resource cpuat91_flash_resource = {
-       .start          = AT91_CHIPSELECT_0,
-       .end            = AT91_CHIPSELECT_0 + SZ_16M - 1,
-       .flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device cpuat91_norflash = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .dev    = {
-               .platform_data  = &cpuat91_flash_data,
-       },
-       .resource       = &cpuat91_flash_resource,
-       .num_resources  = 1,
-};
-
-#ifdef CONFIG_MTD_PLATRAM
-struct platdata_mtd_ram at91_sram_pdata = {
-       .mapname        = "SRAM",
-       .bankwidth      = 2,
-};
-
-static struct resource at91_sram_resource[] = {
-       [0] = {
-               .start = AT91RM9200_SRAM_BASE,
-               .end   = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1,
-               .flags = IORESOURCE_MEM,
-       },
-};
-
-static struct platform_device at91_sram = {
-       .name           = "mtd-ram",
-       .id             = 0,
-       .resource       = at91_sram_resource,
-       .num_resources  = ARRAY_SIZE(at91_sram_resource),
-       .dev    = {
-               .platform_data = &at91_sram_pdata,
-       },
-};
-#endif /* MTD_PLATRAM */
-
-static struct platform_device *platform_devices[] __initdata = {
-       &cpuat91_norflash,
-#ifdef CONFIG_MTD_PLATRAM
-       &at91_sram,
-#endif /* CONFIG_MTD_PLATRAM */
-};
-
-static void __init cpuat91_board_init(void)
-{
-       /* Serial */
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-
-       /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
-       at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
-               ATMEL_UART_RTS);
-
-       /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-       at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
-               ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
-               ATMEL_UART_DCD | ATMEL_UART_RI);
-
-       /* USART2 on ttyS3 (Rx, Tx) */
-       at91_register_uart(AT91RM9200_ID_US2, 3, 0);
-
-       /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
-       at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
-               ATMEL_UART_RTS);
-       at91_add_device_serial();
-       /* LEDs. */
-       at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
-       /* Ethernet */
-       at91_add_device_eth(&cpuat91_eth_data);
-       /* USB Host */
-       at91_add_device_usbh(&cpuat91_usbh_data);
-       /* USB Device */
-       at91_add_device_udc(&cpuat91_udc_data);
-       /* MMC */
-       at91_add_device_mci(0, &cpuat91_mci0_data);
-       /* I2C */
-       at91_add_device_i2c(NULL, 0);
-       /* Platform devices */
-       platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-MACHINE_START(CPUAT91, "Eukrea")
-       /* Maintainer: Eric Benard - EUKREA Electromatique */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = cpuat91_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = cpuat91_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
deleted file mode 100644 (file)
index 0e35a45..0000000
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-csb337.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-static void __init csb337_init_early(void)
-{
-       /* Initialize processor: 3.6864 MHz crystal */
-       at91_initialize(3686400);
-}
-
-static struct macb_platform_data __initdata csb337_eth_data = {
-       .phy_irq_pin    = AT91_PIN_PC2,
-       .is_rmii        = 0,
-       /* The CSB337 bootloader stores the MAC the wrong-way around */
-       .rev_eth_addr   = 1,
-};
-
-static struct at91_usbh_data __initdata csb337_usbh_data = {
-       .ports          = 2,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata csb337_udc_data = {
-       .pullup_pin     = AT91_PIN_PA24,
-       .vbus_pin       = -EINVAL,
-};
-
-static struct i2c_board_info __initdata csb337_i2c_devices[] = {
-       {
-               I2C_BOARD_INFO("ds1307", 0x68),
-       },
-};
-
-static struct at91_cf_data __initdata csb337_cf_data = {
-       /*
-        * connector P4 on the CSB 337 mates to
-        * connector P8 on the CSB 300CF
-        */
-
-       /* CSB337 specific */
-       .det_pin        = AT91_PIN_PC3,
-
-       /* CSB300CF specific */
-       .irq_pin        = AT91_PIN_PA19,
-       .vcc_pin        = AT91_PIN_PD0,
-       .rst_pin        = AT91_PIN_PD2,
-};
-
-static struct mci_platform_data __initdata csb337_mci0_data = {
-       .slot[0] = {
-               .bus_width      = 4,
-               .detect_pin     = AT91_PIN_PD5,
-               .wp_pin         = AT91_PIN_PD6,
-       },
-};
-
-static struct spi_board_info csb337_spi_devices[] = {
-       {       /* CAN controller */
-               .modalias       = "sak82c900",
-               .chip_select    = 0,
-               .max_speed_hz   = 6 * 1000 * 1000,
-       },
-};
-
-#define CSB_FLASH_BASE AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE SZ_8M
-
-static struct mtd_partition csb_flash_partitions[] = {
-       {
-               .name           = "uMON flash",
-               .offset         = 0,
-               .size           = MTDPART_SIZ_FULL,
-               .mask_flags     = MTD_WRITEABLE,        /* read only */
-       }
-};
-
-static struct physmap_flash_data csb_flash_data = {
-       .width          = 2,
-       .parts          = csb_flash_partitions,
-       .nr_parts       = ARRAY_SIZE(csb_flash_partitions),
-};
-
-static struct resource csb_flash_resources[] = {
-       {
-               .start  = CSB_FLASH_BASE,
-               .end    = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
-               .flags  = IORESOURCE_MEM,
-       }
-};
-
-static struct platform_device csb_flash = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .dev            = {
-                               .platform_data = &csb_flash_data,
-                       },
-       .resource       = csb_flash_resources,
-       .num_resources  = ARRAY_SIZE(csb_flash_resources),
-};
-
-/*
- * GPIO Buttons (on CSB300)
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button csb300_buttons[] = {
-       {
-               .gpio           = AT91_PIN_PB29,
-               .code           = BTN_0,
-               .desc           = "sw0",
-               .active_low     = 1,
-               .wakeup         = 1,
-       },
-       {
-               .gpio           = AT91_PIN_PB28,
-               .code           = BTN_1,
-               .desc           = "sw1",
-               .active_low     = 1,
-               .wakeup         = 1,
-       },
-       {
-               .gpio           = AT91_PIN_PA21,
-               .code           = BTN_2,
-               .desc           = "sw2",
-               .active_low     = 1,
-               .wakeup         = 1,
-       }
-};
-
-static struct gpio_keys_platform_data csb300_button_data = {
-       .buttons        = csb300_buttons,
-       .nbuttons       = ARRAY_SIZE(csb300_buttons),
-};
-
-static struct platform_device csb300_button_device = {
-       .name           = "gpio-keys",
-       .id             = -1,
-       .num_resources  = 0,
-       .dev            = {
-               .platform_data  = &csb300_button_data,
-       }
-};
-
-static void __init csb300_add_device_buttons(void)
-{
-       at91_set_gpio_input(AT91_PIN_PB29, 1);  /* sw0 */
-       at91_set_deglitch(AT91_PIN_PB29, 1);
-       at91_set_gpio_input(AT91_PIN_PB28, 1);  /* sw1 */
-       at91_set_deglitch(AT91_PIN_PB28, 1);
-       at91_set_gpio_input(AT91_PIN_PA21, 1);  /* sw2 */
-       at91_set_deglitch(AT91_PIN_PA21, 1);
-
-       platform_device_register(&csb300_button_device);
-}
-#else
-static void __init csb300_add_device_buttons(void) {}
-#endif
-
-static struct gpio_led csb_leds[] = {
-       {       /* "led0", yellow */
-               .name                   = "led0",
-               .gpio                   = AT91_PIN_PB2,
-               .active_low             = 1,
-               .default_trigger        = "heartbeat",
-       },
-       {       /* "led1", green */
-               .name                   = "led1",
-               .gpio                   = AT91_PIN_PB1,
-               .active_low             = 1,
-               .default_trigger        = "mmc0",
-       },
-       {       /* "led2", yellow */
-               .name                   = "led2",
-               .gpio                   = AT91_PIN_PB0,
-               .active_low             = 1,
-               .default_trigger        = "ide-disk",
-       }
-};
-
-
-static void __init csb337_board_init(void)
-{
-       /* Serial */
-       /* DBGU on ttyS0 */
-       at91_register_uart(0, 0, 0);
-       at91_add_device_serial();
-       /* Ethernet */
-       at91_add_device_eth(&csb337_eth_data);
-       /* USB Host */
-       at91_add_device_usbh(&csb337_usbh_data);
-       /* USB Device */
-       at91_add_device_udc(&csb337_udc_data);
-       /* I2C */
-       at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
-       /* Compact Flash */
-       at91_set_gpio_input(AT91_PIN_PB22, 1);          /* IOIS16 */
-       at91_add_device_cf(&csb337_cf_data);
-       /* SPI */
-       at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
-       /* MMC */
-       at91_add_device_mci(0, &csb337_mci0_data);
-       /* NOR flash */
-       platform_device_register(&csb_flash);
-       /* LEDs */
-       at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
-       /* Switches on CSB300 */
-       csb300_add_device_buttons();
-}
-
-MACHINE_START(CSB337, "Cogent CSB337")
-       /* Maintainer: Bill Gatliff */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = csb337_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = csb337_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
deleted file mode 100644 (file)
index 18d027f..0000000
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-csb637.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init csb637_init_early(void)
-{
-       /* Initialize processor: 3.6864 MHz crystal */
-       at91_initialize(3686400);
-}
-
-static struct macb_platform_data __initdata csb637_eth_data = {
-       .phy_irq_pin    = AT91_PIN_PC0,
-       .is_rmii        = 0,
-};
-
-static struct at91_usbh_data __initdata csb637_usbh_data = {
-       .ports          = 2,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata csb637_udc_data = {
-       .vbus_pin     = AT91_PIN_PB28,
-       .pullup_pin   = AT91_PIN_PB1,
-};
-
-#define CSB_FLASH_BASE AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE SZ_16M
-
-static struct mtd_partition csb_flash_partitions[] = {
-       {
-               .name           = "uMON flash",
-               .offset         = 0,
-               .size           = MTDPART_SIZ_FULL,
-               .mask_flags     = MTD_WRITEABLE,        /* read only */
-       }
-};
-
-static struct physmap_flash_data csb_flash_data = {
-       .width          = 2,
-       .parts          = csb_flash_partitions,
-       .nr_parts       = ARRAY_SIZE(csb_flash_partitions),
-};
-
-static struct resource csb_flash_resources[] = {
-       {
-               .start  = CSB_FLASH_BASE,
-               .end    = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
-               .flags  = IORESOURCE_MEM,
-       }
-};
-
-static struct platform_device csb_flash = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .dev            = {
-                               .platform_data = &csb_flash_data,
-                       },
-       .resource       = csb_flash_resources,
-       .num_resources  = ARRAY_SIZE(csb_flash_resources),
-};
-
-static struct gpio_led csb_leds[] = {
-       {       /* "d1", red */
-               .name                   = "d1",
-               .gpio                   = AT91_PIN_PB2,
-               .active_low             = 1,
-               .default_trigger        = "heartbeat",
-       },
-};
-
-static void __init csb637_board_init(void)
-{
-       /* LED(s) */
-       at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
-       /* Serial */
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-       at91_add_device_serial();
-       /* Ethernet */
-       at91_add_device_eth(&csb637_eth_data);
-       /* USB Host */
-       at91_add_device_usbh(&csb637_usbh_data);
-       /* USB Device */
-       at91_add_device_udc(&csb637_udc_data);
-       /* I2C */
-       at91_add_device_i2c(NULL, 0);
-       /* SPI */
-       at91_add_device_spi(NULL, 0);
-       /* NOR flash */
-       platform_device_register(&csb_flash);
-}
-
-MACHINE_START(CSB637, "Cogent CSB637")
-       /* Maintainer: Bill Gatliff */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = csb637_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = csb637_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
deleted file mode 100644 (file)
index aa457a8..0000000
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-eb9200.c
- *
- *  Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
- *  by Andrew Patrikalakis
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init eb9200_init_early(void)
-{
-       /* Initialize processor: 18.432 MHz crystal */
-       at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata eb9200_eth_data = {
-       .phy_irq_pin    = AT91_PIN_PC4,
-       .is_rmii        = 1,
-};
-
-static struct at91_usbh_data __initdata eb9200_usbh_data = {
-       .ports          = 2,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata eb9200_udc_data = {
-       .vbus_pin       = AT91_PIN_PD4,
-       .pullup_pin     = AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata eb9200_cf_data = {
-       .irq_pin        = -EINVAL,
-       .det_pin        = AT91_PIN_PB0,
-       .vcc_pin        = -EINVAL,
-       .rst_pin        = AT91_PIN_PC5,
-};
-
-static struct mci_platform_data __initdata eb9200_mci0_data = {
-       .slot[0] = {
-               .bus_width      = 4,
-               .detect_pin     = -EINVAL,
-               .wp_pin         = -EINVAL,
-       },
-};
-
-static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
-       {
-               I2C_BOARD_INFO("24c512", 0x50),
-       },
-};
-
-
-static void __init eb9200_board_init(void)
-{
-       /* Serial */
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-
-       /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-       at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-                       | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-                       | ATMEL_UART_RI);
-
-       /* USART2 on ttyS2. (Rx, Tx) - IRDA */
-       at91_register_uart(AT91RM9200_ID_US2, 2, 0);
-       at91_add_device_serial();
-       /* Ethernet */
-       at91_add_device_eth(&eb9200_eth_data);
-       /* USB Host */
-       at91_add_device_usbh(&eb9200_usbh_data);
-       /* USB Device */
-       at91_add_device_udc(&eb9200_udc_data);
-       /* I2C */
-       at91_add_device_i2c(eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices));
-       /* Compact Flash */
-       at91_add_device_cf(&eb9200_cf_data);
-       /* SPI */
-       at91_add_device_spi(NULL, 0);
-       /* MMC */
-       /* only supports 1 or 4 bit interface, not wired through to SPI */
-       at91_add_device_mci(0, &eb9200_mci0_data);
-}
-
-MACHINE_START(ATEB9200, "Embest ATEB9200")
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = eb9200_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = eb9200_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
deleted file mode 100644 (file)
index ede1373..0000000
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
- * Copyright (C) 2007 emQbit.com.
- *
- * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ecb_at91init_early(void)
-{
-       /* Set cpu type: PQFP */
-       at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-       /* Initialize processor: 18.432 MHz crystal */
-       at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata ecb_at91eth_data = {
-       .phy_irq_pin    = AT91_PIN_PC4,
-       .is_rmii        = 0,
-};
-
-static struct at91_usbh_data __initdata ecb_at91usbh_data = {
-       .ports          = 1,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct mci_platform_data __initdata ecbat91_mci0_data = {
-       .slot[0] = {
-               .bus_width      = 4,
-               .detect_pin     = -EINVAL,
-               .wp_pin         = -EINVAL,
-       },
-};
-
-
-#if defined(CONFIG_MTD_DATAFLASH)
-static struct mtd_partition __initdata my_flash0_partitions[] =
-{
-       {       /* 0x8400 */
-               .name   = "Darrell-loader",
-               .offset = 0,
-               .size   = 12 * 1056,
-       },
-       {
-               .name   = "U-boot",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size   = 110 * 1056,
-       },
-       {       /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
-               .name   = "UBoot-env",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size   = 8 * 1056,
-       },
-       {       /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
-               .name   = "Kernel",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size   = 1534 * 1056,
-       },
-       {       /* 190200 - jffs2 root filesystem */
-               .name   = "Filesystem",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size   = MTDPART_SIZ_FULL,     /* 26 sectors */
-       }
-};
-
-static struct flash_platform_data __initdata my_flash0_platform = {
-       .name           = "Removable flash card",
-       .parts          = my_flash0_partitions,
-       .nr_parts       = ARRAY_SIZE(my_flash0_partitions)
-};
-
-#endif
-
-static struct spi_board_info __initdata ecb_at91spi_devices[] = {
-       {       /* DataFlash chip */
-               .modalias       = "mtd_dataflash",
-               .chip_select    = 0,
-               .max_speed_hz   = 10 * 1000 * 1000,
-               .bus_num        = 0,
-#if defined(CONFIG_MTD_DATAFLASH)
-               .platform_data  = &my_flash0_platform,
-#endif
-       },
-       {       /* User accessible spi - cs1 (250KHz) */
-               .modalias       = "spi-cs1",
-               .chip_select    = 1,
-               .max_speed_hz   = 250 * 1000,
-       },
-       {       /* User accessible spi - cs2 (1MHz) */
-               .modalias       = "spi-cs2",
-               .chip_select    = 2,
-               .max_speed_hz   = 1 * 1000 * 1000,
-       },
-       {       /* User accessible spi - cs3 (10MHz) */
-               .modalias       = "spi-cs3",
-               .chip_select    = 3,
-               .max_speed_hz   = 10 * 1000 * 1000,
-       },
-};
-
-/*
- * LEDs
- */
-static struct gpio_led ecb_leds[] = {
-       {       /* D1 */
-               .name                   = "led1",
-               .gpio                   = AT91_PIN_PC7,
-               .active_low             = 1,
-               .default_trigger        = "heartbeat",
-       }
-};
-
-static void __init ecb_at91board_init(void)
-{
-       /* Serial */
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-
-       /* USART0 on ttyS1. (Rx & Tx only) */
-       at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-       at91_add_device_serial();
-
-       /* Ethernet */
-       at91_add_device_eth(&ecb_at91eth_data);
-
-       /* USB Host */
-       at91_add_device_usbh(&ecb_at91usbh_data);
-
-       /* I2C */
-       at91_add_device_i2c(NULL, 0);
-
-       /* MMC */
-       at91_add_device_mci(0, &ecbat91_mci0_data);
-
-       /* SPI */
-       at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
-
-       /* LEDs */
-       at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
-}
-
-MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
-       /* Maintainer: emQbit.com */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = ecb_at91init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = ecb_at91board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
deleted file mode 100644 (file)
index 4e75321..0000000
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init eco920_init_early(void)
-{
-       /* Set cpu type: PQFP */
-       at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-       at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata eco920_eth_data = {
-       .phy_irq_pin    = AT91_PIN_PC2,
-       .is_rmii        = 1,
-};
-
-static struct at91_usbh_data __initdata eco920_usbh_data = {
-       .ports          = 1,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata eco920_udc_data = {
-       .vbus_pin       = AT91_PIN_PB12,
-       .pullup_pin     = AT91_PIN_PB13,
-};
-
-static struct mci_platform_data __initdata eco920_mci0_data = {
-       .slot[0] = {
-               .bus_width      = 1,
-               .detect_pin     = -EINVAL,
-               .wp_pin         = -EINVAL,
-       },
-};
-
-static struct physmap_flash_data eco920_flash_data = {
-       .width  = 2,
-};
-
-static struct resource eco920_flash_resource = {
-       .start          = 0x11000000,
-       .end            = 0x11ffffff,
-       .flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device eco920_flash = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .dev            = {
-               .platform_data  = &eco920_flash_data,
-       },
-       .resource       = &eco920_flash_resource,
-       .num_resources  = 1,
-};
-
-static struct spi_board_info eco920_spi_devices[] = {
-       {       /* CAN controller */
-               .modalias       = "tlv5638",
-               .chip_select    = 3,
-               .max_speed_hz   = 20 * 1000 * 1000,
-               .mode           = SPI_CPHA,
-       },
-};
-
-/*
- * LEDs
- */
-static struct gpio_led eco920_leds[] = {
-       {       /* D1 */
-               .name                   = "led1",
-               .gpio                   = AT91_PIN_PB0,
-               .active_low             = 1,
-               .default_trigger        = "heartbeat",
-       },
-       {       /* D2 */
-               .name                   = "led2",
-               .gpio                   = AT91_PIN_PB1,
-               .active_low             = 1,
-               .default_trigger        = "timer",
-       }
-};
-
-static void __init eco920_board_init(void)
-{
-       /* DBGU on ttyS0. (Rx & Tx only */
-       at91_register_uart(0, 0, 0);
-       at91_add_device_serial();
-       at91_add_device_eth(&eco920_eth_data);
-       at91_add_device_usbh(&eco920_usbh_data);
-       at91_add_device_udc(&eco920_udc_data);
-
-       at91_add_device_mci(0, &eco920_mci0_data);
-       platform_device_register(&eco920_flash);
-
-       at91_ramc_write(0, AT91_SMC_CSR(7),     AT91_SMC_RWHOLD_(1)
-                               | AT91_SMC_RWSETUP_(1)
-                               | AT91_SMC_DBW_8
-                               | AT91_SMC_WSEN
-                               | AT91_SMC_NWS_(15));
-
-       at91_set_A_periph(AT91_PIN_PC6, 1);
-
-       at91_set_gpio_input(AT91_PIN_PA23, 0);
-       at91_set_deglitch(AT91_PIN_PA23, 1);
-
-/* Initialization of the Static Memory Controller for Chip Select 3 */
-       at91_ramc_write(0, AT91_SMC_CSR(3),
-               AT91_SMC_DBW_16  |      /* 16 bit */
-               AT91_SMC_WSEN    |
-               AT91_SMC_NWS_(5) |      /* wait states */
-               AT91_SMC_TDF_(1)        /* float time */
-       );
-
-       at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
-       /* LEDs */
-       at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
-}
-
-MACHINE_START(ECO920, "eco920")
-       /* Maintainer: Sascha Hauer */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = eco920_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = eco920_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
deleted file mode 100644 (file)
index 93b1df4..0000000
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-kafa.c
- *
- *  Copyright (C) 2006 Sperry-Sun
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init kafa_init_early(void)
-{
-       /* Set cpu type: PQFP */
-       at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-       /* Initialize processor: 18.432 MHz crystal */
-       at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata kafa_eth_data = {
-       .phy_irq_pin    = AT91_PIN_PC4,
-       .is_rmii        = 0,
-};
-
-static struct at91_usbh_data __initdata kafa_usbh_data = {
-       .ports          = 1,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata kafa_udc_data = {
-       .vbus_pin       = AT91_PIN_PB6,
-       .pullup_pin     = AT91_PIN_PB7,
-};
-
-/*
- * LEDs
- */
-static struct gpio_led kafa_leds[] = {
-       {       /* D1 */
-               .name                   = "led1",
-               .gpio                   = AT91_PIN_PB4,
-               .active_low             = 1,
-               .default_trigger        = "heartbeat",
-       },
-};
-
-static void __init kafa_board_init(void)
-{
-       /* Serial */
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-
-       /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
-       at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-       at91_add_device_serial();
-       /* Ethernet */
-       at91_add_device_eth(&kafa_eth_data);
-       /* USB Host */
-       at91_add_device_usbh(&kafa_usbh_data);
-       /* USB Device */
-       at91_add_device_udc(&kafa_udc_data);
-       /* I2C */
-       at91_add_device_i2c(NULL, 0);
-       /* SPI */
-       at91_add_device_spi(NULL, 0);
-       /* LEDs */
-       at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
-}
-
-MACHINE_START(KAFA, "Sperry-Sun KAFA")
-       /* Maintainer: Sergei Sharonov */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = kafa_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = kafa_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
deleted file mode 100644 (file)
index d58d362..0000000
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-kb9202.c
- *
- *  Copyright (c) 2005 kb_admin
- *                    KwikByte, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init kb9202_init_early(void)
-{
-       /* Set cpu type: PQFP */
-       at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-       /* Initialize processor: 10 MHz crystal */
-       at91_initialize(10000000);
-}
-
-static struct macb_platform_data __initdata kb9202_eth_data = {
-       .phy_irq_pin    = AT91_PIN_PB29,
-       .is_rmii        = 0,
-};
-
-static struct at91_usbh_data __initdata kb9202_usbh_data = {
-       .ports          = 1,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata kb9202_udc_data = {
-       .vbus_pin       = AT91_PIN_PB24,
-       .pullup_pin     = AT91_PIN_PB22,
-};
-
-static struct mci_platform_data __initdata kb9202_mci0_data = {
-       .slot[0] = {
-               .bus_width      = 4,
-               .detect_pin     = AT91_PIN_PB2,
-               .wp_pin         = -EINVAL,
-       },
-};
-
-static struct mtd_partition __initdata kb9202_nand_partition[] = {
-       {
-               .name   = "nand_fs",
-               .offset = 0,
-               .size   = MTDPART_SIZ_FULL,
-       },
-};
-
-static struct atmel_nand_data __initdata kb9202_nand_data = {
-       .ale            = 22,
-       .cle            = 21,
-       .det_pin        = -EINVAL,
-       .rdy_pin        = AT91_PIN_PC29,
-       .enable_pin     = AT91_PIN_PC28,
-       .ecc_mode       = NAND_ECC_SOFT,
-       .parts          = kb9202_nand_partition,
-       .num_parts      = ARRAY_SIZE(kb9202_nand_partition),
-};
-
-/*
- * LEDs
- */
-static struct gpio_led kb9202_leds[] = {
-       {       /* D1 */
-               .name                   = "led1",
-               .gpio                   = AT91_PIN_PC19,
-               .active_low             = 1,
-               .default_trigger        = "heartbeat",
-       },
-       {       /* D2 */
-               .name                   = "led2",
-               .gpio                   = AT91_PIN_PC18,
-               .active_low             = 1,
-               .default_trigger        = "timer",
-       }
-};
-
-static void __init kb9202_board_init(void)
-{
-       /* Serial */
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-
-       /* USART0 on ttyS1 (Rx & Tx only) */
-       at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
-       /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
-       at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-
-       /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
-       at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-       at91_add_device_serial();
-       /* Ethernet */
-       at91_add_device_eth(&kb9202_eth_data);
-       /* USB Host */
-       at91_add_device_usbh(&kb9202_usbh_data);
-       /* USB Device */
-       at91_add_device_udc(&kb9202_udc_data);
-       /* MMC */
-       at91_add_device_mci(0, &kb9202_mci0_data);
-       /* I2C */
-       at91_add_device_i2c(NULL, 0);
-       /* SPI */
-       at91_add_device_spi(NULL, 0);
-       /* NAND */
-       at91_add_device_nand(&kb9202_nand_data);
-       /* LEDs */
-       at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
-}
-
-MACHINE_START(KB9200, "KB920x")
-       /* Maintainer: KwikByte, Inc. */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = kb9202_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = kb9202_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
deleted file mode 100644 (file)
index 2c0f2d5..0000000
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-picotux200.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Kleinhenz Elektronik GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init picotux200_init_early(void)
-{
-       /* Initialize processor: 18.432 MHz crystal */
-       at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata picotux200_eth_data = {
-       .phy_irq_pin    = AT91_PIN_PC4,
-       .is_rmii        = 1,
-};
-
-static struct at91_usbh_data __initdata picotux200_usbh_data = {
-       .ports          = 1,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct mci_platform_data __initdata picotux200_mci0_data = {
-       .slot[0] = {
-               .bus_width      = 4,
-               .detect_pin     = AT91_PIN_PB27,
-               .wp_pin         = AT91_PIN_PA17,
-       },
-};
-
-#define PICOTUX200_FLASH_BASE  AT91_CHIPSELECT_0
-#define PICOTUX200_FLASH_SIZE  SZ_4M
-
-static struct physmap_flash_data picotux200_flash_data = {
-       .width  = 2,
-};
-
-static struct resource picotux200_flash_resource = {
-       .start          = PICOTUX200_FLASH_BASE,
-       .end            = PICOTUX200_FLASH_BASE + PICOTUX200_FLASH_SIZE - 1,
-       .flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device picotux200_flash = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .dev            = {
-                               .platform_data  = &picotux200_flash_data,
-                       },
-       .resource       = &picotux200_flash_resource,
-       .num_resources  = 1,
-};
-
-static void __init picotux200_board_init(void)
-{
-       /* Serial */
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-
-       /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-       at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-                         | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-                         | ATMEL_UART_RI);
-       at91_add_device_serial();
-       /* Ethernet */
-       at91_add_device_eth(&picotux200_eth_data);
-       /* USB Host */
-       at91_add_device_usbh(&picotux200_usbh_data);
-       /* I2C */
-       at91_add_device_i2c(NULL, 0);
-       /* MMC */
-       at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
-       at91_add_device_mci(0, &picotux200_mci0_data);
-       /* NOR Flash */
-       platform_device_register(&picotux200_flash);
-}
-
-MACHINE_START(PICOTUX2XX, "picotux 200")
-       /* Maintainer: Kleinhenz Elektronik GmbH */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = picotux200_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = picotux200_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
deleted file mode 100644 (file)
index 953cea4..0000000
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-rm9200ek.c
- *
- *  Copyright (C) 2005 SAN People
- *
- *  Epson S1D framebuffer glue code is:
- *     Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
-       /* Initialize processor: 18.432 MHz crystal */
-       at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata ek_eth_data = {
-       .phy_irq_pin    = AT91_PIN_PC4,
-       .is_rmii        = 1,
-};
-
-static struct at91_usbh_data __initdata ek_usbh_data = {
-       .ports          = 2,
-       .vbus_pin       = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata ek_udc_data = {
-       .vbus_pin       = AT91_PIN_PD4,
-       .pullup_pin     = AT91_PIN_PD5,
-};
-
-#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct mci_platform_data __initdata ek_mci0_data = {
-       .slot[0] = {
-               .bus_width      = 4,
-               .detect_pin     = AT91_PIN_PB27,
-               .wp_pin         = AT91_PIN_PA17,
-       }
-};
-#endif
-
-static struct spi_board_info ek_spi_devices[] = {
-       {       /* DataFlash chip */
-               .modalias       = "mtd_dataflash",
-               .chip_select    = 0,
-               .max_speed_hz   = 15 * 1000 * 1000,
-       },
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-       {       /* DataFlash card */
-               .modalias       = "mtd_dataflash",
-               .chip_select    = 3,
-               .max_speed_hz   = 15 * 1000 * 1000,
-       },
-#endif
-};
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
-       {
-               I2C_BOARD_INFO("ics1523", 0x26),
-       },
-       {
-               I2C_BOARD_INFO("dac3550", 0x4d),
-       }
-};
-
-#define EK_FLASH_BASE  AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE  SZ_8M
-
-static struct physmap_flash_data ek_flash_data = {
-       .width          = 2,
-};
-
-static struct resource ek_flash_resource = {
-       .start          = EK_FLASH_BASE,
-       .end            = EK_FLASH_BASE + EK_FLASH_SIZE - 1,
-       .flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device ek_flash = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .dev            = {
-                               .platform_data  = &ek_flash_data,
-                       },
-       .resource       = &ek_flash_resource,
-       .num_resources  = 1,
-};
-
-static struct gpio_led ek_leds[] = {
-       {       /* "user led 1", DS2 */
-               .name                   = "green",
-               .gpio                   = AT91_PIN_PB0,
-               .active_low             = 1,
-               .default_trigger        = "mmc0",
-       },
-       {       /* "user led 2", DS4 */
-               .name                   = "yellow",
-               .gpio                   = AT91_PIN_PB1,
-               .active_low             = 1,
-               .default_trigger        = "heartbeat",
-       },
-       {       /* "user led 3", DS6 */
-               .name                   = "red",
-               .gpio                   = AT91_PIN_PB2,
-               .active_low             = 1,
-       }
-};
-
-static void __init ek_board_init(void)
-{
-       /* Serial */
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-
-       /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-       at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-                          | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-                          | ATMEL_UART_RI);
-       at91_add_device_serial();
-       /* Ethernet */
-       at91_add_device_eth(&ek_eth_data);
-       /* USB Host */
-       at91_add_device_usbh(&ek_usbh_data);
-       /* USB Device */
-       at91_add_device_udc(&ek_udc_data);
-       at91_set_multi_drive(ek_udc_data.pullup_pin, 1);        /* pullup_pin is connected to reset */
-       /* I2C */
-       at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
-       /* SPI */
-       at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-       /* DataFlash card */
-       at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
-       /* MMC */
-       at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
-       at91_add_device_mci(0, &ek_mci0_data);
-#endif
-       /* NOR Flash */
-       platform_device_register(&ek_flash);
-       /* LEDs */
-       at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-       /* VGA */
-//     ek_add_device_video();
-}
-
-MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
-       /* Maintainer: SAN People/Atmel */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = ek_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
deleted file mode 100644 (file)
index 46fdb0c..0000000
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-yl-9200.c
- *
- * Adapted from various board files in arch/arm/mach-at91
- *
- * Modifications for YL-9200 platform:
- *  Copyright (C) 2007 S. Birtles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init yl9200_init_early(void)
-{
-       /* Set cpu type: PQFP */
-       at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-       /* Initialize processor: 18.432 MHz crystal */
-       at91_initialize(18432000);
-}
-
-/*
- * LEDs
- */
-static struct gpio_led yl9200_leds[] = {
-       {       /* D2 */
-               .name                   = "led2",
-               .gpio                   = AT91_PIN_PB17,
-               .active_low             = 1,
-               .default_trigger        = "timer",
-       },
-       {       /* D3 */
-               .name                   = "led3",
-               .gpio                   = AT91_PIN_PB16,
-               .active_low             = 1,
-               .default_trigger        = "heartbeat",
-       },
-       {       /* D4 */
-               .name                   = "led4",
-               .gpio                   = AT91_PIN_PB15,
-               .active_low             = 1,
-       },
-       {       /* D5 */
-               .name                   = "led5",
-               .gpio                   = AT91_PIN_PB8,
-               .active_low             = 1,
-       }
-};
-
-/*
- * Ethernet
- */
-static struct macb_platform_data __initdata yl9200_eth_data = {
-       .phy_irq_pin            = AT91_PIN_PB28,
-       .is_rmii                = 1,
-};
-
-/*
- * USB Host
- */
-static struct at91_usbh_data __initdata yl9200_usbh_data = {
-       .ports                  = 1,    /* PQFP version of AT91RM9200 */
-       .vbus_pin               = {-EINVAL, -EINVAL},
-       .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device
- */
-static struct at91_udc_data __initdata yl9200_udc_data = {
-       .pullup_pin             = AT91_PIN_PC4,
-       .vbus_pin               = AT91_PIN_PC5,
-       .pullup_active_low      = 1,    /* Active Low due to PNP transistor (pg 7) */
-
-};
-
-/*
- * MMC
- */
-static struct mci_platform_data __initdata yl9200_mci0_data = {
-       .slot[0] = {
-               .bus_width      = 4,
-               .detect_pin     = AT91_PIN_PB9,
-               .wp_pin         = -EINVAL,
-       },
-};
-
-/*
- * NAND Flash
- */
-static struct mtd_partition __initdata yl9200_nand_partition[] = {
-       {
-               .name   = "AT91 NAND partition 1, boot",
-               .offset = 0,
-               .size   = SZ_256K
-       },
-       {
-               .name   = "AT91 NAND partition 2, kernel",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size   = (2 * SZ_1M) - SZ_256K
-       },
-       {
-               .name   = "AT91 NAND partition 3, filesystem",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size   = 14 * SZ_1M
-       },
-       {
-               .name   = "AT91 NAND partition 4, storage",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size   = SZ_16M
-       },
-       {
-               .name   = "AT91 NAND partition 5, ext-fs",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size   = SZ_32M
-       }
-};
-
-static struct atmel_nand_data __initdata yl9200_nand_data = {
-       .ale            = 6,
-       .cle            = 7,
-       .det_pin        = -EINVAL,
-       .rdy_pin        = AT91_PIN_PC14,        /* R/!B (Sheet10) */
-       .enable_pin     = AT91_PIN_PC15,        /* !CE  (Sheet10) */
-       .ecc_mode       = NAND_ECC_SOFT,
-       .parts          = yl9200_nand_partition,
-       .num_parts      = ARRAY_SIZE(yl9200_nand_partition),
-};
-
-/*
- * NOR Flash
- */
-#define YL9200_FLASH_BASE      AT91_CHIPSELECT_0
-#define YL9200_FLASH_SIZE      SZ_16M
-
-static struct mtd_partition yl9200_flash_partitions[] = {
-       {
-               .name           = "Bootloader",
-               .offset         = 0,
-               .size           = SZ_256K,
-               .mask_flags     = MTD_WRITEABLE,        /* force read-only */
-       },
-       {
-               .name           = "Kernel",
-               .offset         = MTDPART_OFS_NXTBLK,
-               .size           = (2 * SZ_1M) - SZ_256K
-       },
-       {
-               .name           = "Filesystem",
-               .offset         = MTDPART_OFS_NXTBLK,
-               .size           = MTDPART_SIZ_FULL
-       }
-};
-
-static struct physmap_flash_data yl9200_flash_data = {
-       .width          = 2,
-       .parts          = yl9200_flash_partitions,
-       .nr_parts       = ARRAY_SIZE(yl9200_flash_partitions),
-};
-
-static struct resource yl9200_flash_resources[] = {
-       {
-               .start  = YL9200_FLASH_BASE,
-               .end    = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
-               .flags  = IORESOURCE_MEM,
-       }
-};
-
-static struct platform_device yl9200_flash = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .dev            = {
-                               .platform_data  = &yl9200_flash_data,
-                       },
-       .resource       = yl9200_flash_resources,
-       .num_resources  = ARRAY_SIZE(yl9200_flash_resources),
-};
-
-/*
- * I2C (TWI)
- */
-static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
-       {       /* EEPROM */
-               I2C_BOARD_INFO("24c128", 0x50),
-       }
-};
-
-/*
- * GPIO Buttons
-*/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button yl9200_buttons[] = {
-       {
-               .gpio           = AT91_PIN_PA24,
-               .code           = BTN_2,
-               .desc           = "SW2",
-               .active_low     = 1,
-               .wakeup         = 1,
-       },
-       {
-               .gpio           = AT91_PIN_PB1,
-               .code           = BTN_3,
-               .desc           = "SW3",
-               .active_low     = 1,
-               .wakeup         = 1,
-       },
-       {
-               .gpio           = AT91_PIN_PB2,
-               .code           = BTN_4,
-               .desc           = "SW4",
-               .active_low     = 1,
-               .wakeup         = 1,
-       },
-       {
-               .gpio           = AT91_PIN_PB6,
-               .code           = BTN_5,
-               .desc           = "SW5",
-               .active_low     = 1,
-               .wakeup         = 1,
-       }
-};
-
-static struct gpio_keys_platform_data yl9200_button_data = {
-       .buttons        = yl9200_buttons,
-       .nbuttons       = ARRAY_SIZE(yl9200_buttons),
-};
-
-static struct platform_device yl9200_button_device = {
-       .name           = "gpio-keys",
-       .id             = -1,
-       .num_resources  = 0,
-       .dev            = {
-               .platform_data  = &yl9200_button_data,
-       }
-};
-
-static void __init yl9200_add_device_buttons(void)
-{
-       at91_set_gpio_input(AT91_PIN_PA24, 1);  /* SW2 */
-       at91_set_deglitch(AT91_PIN_PA24, 1);
-       at91_set_gpio_input(AT91_PIN_PB1, 1);   /* SW3 */
-       at91_set_deglitch(AT91_PIN_PB1, 1);
-       at91_set_gpio_input(AT91_PIN_PB2, 1);   /* SW4 */
-       at91_set_deglitch(AT91_PIN_PB2, 1);
-       at91_set_gpio_input(AT91_PIN_PB6, 1);   /* SW5 */
-       at91_set_deglitch(AT91_PIN_PB6, 1);
-
-       /* Enable buttons (Sheet 5) */
-       at91_set_gpio_output(AT91_PIN_PB7, 1);
-
-       platform_device_register(&yl9200_button_device);
-}
-#else
-static void __init yl9200_add_device_buttons(void) {}
-#endif
-
-/*
- * Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
-       return !at91_get_gpio_value(AT91_PIN_PB11);     /* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
-       .model                  = 7843,
-       .x_min                  = 150,
-       .x_max                  = 3830,
-       .y_min                  = 190,
-       .y_max                  = 3830,
-       .vref_delay_usecs       = 100,
-
-       /* For a 8" touch-screen */
-       // .x_plate_ohms                = 603,
-       // .y_plate_ohms                = 332,
-
-       /* For a 10.4" touch-screen */
-       // .x_plate_ohms                = 611,
-       // .y_plate_ohms                = 325,
-
-       .x_plate_ohms           = 576,
-       .y_plate_ohms           = 366,
-
-       .pressure_max           = 15000, /* generally nonsense on the 7843 */
-       .debounce_max           = 1,
-       .debounce_rep           = 0,
-       .debounce_tol           = (~0),
-       .get_pendown_state      = ads7843_pendown_state,
-};
-
-static void __init yl9200_add_device_ts(void)
-{
-       at91_set_gpio_input(AT91_PIN_PB11, 1);  /* Touchscreen interrupt pin */
-       at91_set_gpio_input(AT91_PIN_PB10, 1);  /* Touchscreen BUSY signal - not used! */
-}
-#else
-static void __init yl9200_add_device_ts(void) {}
-#endif
-
-/*
- * SPI devices
- */
-static struct spi_board_info yl9200_spi_devices[] = {
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-       {       /* Touchscreen */
-               .modalias       = "ads7846",
-               .chip_select    = 0,
-               .max_speed_hz   = 5000 * 26,
-               .platform_data  = &ads_info,
-               .irq            = AT91_PIN_PB11,
-       },
-#endif
-       {       /* CAN */
-               .modalias       = "mcp2510",
-               .chip_select    = 1,
-               .max_speed_hz   = 25000 * 26,
-               .irq            = AT91_PIN_PC0,
-       }
-};
-
-/*
- * LCD / VGA
- *
- * EPSON S1D13806 FB (discontinued chip)
- * EPSON S1D13506 FB
- */
-#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-#include <video/s1d13xxxfb.h>
-
-
-static void yl9200_init_video(void)
-{
-       /* NWAIT Signal */
-       at91_set_A_periph(AT91_PIN_PC6, 0);
-
-       /* Initialization of the Static Memory Controller for Chip Select 2 */
-       at91_ramc_write(0, AT91_SMC_CSR(2), AT91_SMC_DBW_16             /* 16 bit */
-                       | AT91_SMC_WSEN | AT91_SMC_NWS_(0x4)    /* wait states */
-                       | AT91_SMC_TDF_(0x100)                  /* float time */
-       );
-}
-
-static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
-{
-       {S1DREG_MISC,                   0x00},  /* Miscellaneous Register*/
-       {S1DREG_COM_DISP_MODE,          0x01},  /* Display Mode Register, LCD only*/
-       {S1DREG_GPIO_CNF0,              0x00},  /* General IO Pins Configuration Register*/
-       {S1DREG_GPIO_CTL0,              0x00},  /* General IO Pins Control Register*/
-       {S1DREG_CLK_CNF,                0x11},  /* Memory Clock Configuration Register*/
-       {S1DREG_LCD_CLK_CNF,            0x10},  /* LCD Pixel Clock Configuration Register*/
-       {S1DREG_CRT_CLK_CNF,            0x12},  /* CRT/TV Pixel Clock Configuration Register*/
-       {S1DREG_MPLUG_CLK_CNF,          0x01},  /* MediaPlug Clock Configuration Register*/
-       {S1DREG_CPU2MEM_WST_SEL,        0x02},  /* CPU To Memory Wait State Select Register*/
-       {S1DREG_MEM_CNF,                0x00},  /* Memory Configuration Register*/
-       {S1DREG_SDRAM_REF_RATE,         0x04},  /* DRAM Refresh Rate Register, MCLK source*/
-       {S1DREG_SDRAM_TC0,              0x12},  /* DRAM Timings Control Register 0*/
-       {S1DREG_SDRAM_TC1,              0x02},  /* DRAM Timings Control Register 1*/
-       {S1DREG_PANEL_TYPE,             0x25},  /* Panel Type Register*/
-       {S1DREG_MOD_RATE,               0x00},  /* MOD Rate Register*/
-       {S1DREG_LCD_DISP_HWIDTH,        0x4F},  /* LCD Horizontal Display Width Register*/
-       {S1DREG_LCD_NDISP_HPER,         0x13},  /* LCD Horizontal Non-Display Period Register*/
-       {S1DREG_TFT_FPLINE_START,       0x01},  /* TFT FPLINE Start Position Register*/
-       {S1DREG_TFT_FPLINE_PWIDTH,      0x0c},  /* TFT FPLINE Pulse Width Register*/
-       {S1DREG_LCD_DISP_VHEIGHT0,      0xDF},  /* LCD Vertical Display Height Register 0*/
-       {S1DREG_LCD_DISP_VHEIGHT1,      0x01},  /* LCD Vertical Display Height Register 1*/
-       {S1DREG_LCD_NDISP_VPER,         0x2c},  /* LCD Vertical Non-Display Period Register*/
-       {S1DREG_TFT_FPFRAME_START,      0x0a},  /* TFT FPFRAME Start Position Register*/
-       {S1DREG_TFT_FPFRAME_PWIDTH,     0x02},  /* TFT FPFRAME Pulse Width Register*/
-       {S1DREG_LCD_DISP_MODE,          0x05},  /* LCD Display Mode Register*/
-       {S1DREG_LCD_MISC,               0x01},  /* LCD Miscellaneous Register*/
-       {S1DREG_LCD_DISP_START0,        0x00},  /* LCD Display Start Address Register 0*/
-       {S1DREG_LCD_DISP_START1,        0x00},  /* LCD Display Start Address Register 1*/
-       {S1DREG_LCD_DISP_START2,        0x00},  /* LCD Display Start Address Register 2*/
-       {S1DREG_LCD_MEM_OFF0,           0x80},  /* LCD Memory Address Offset Register 0*/
-       {S1DREG_LCD_MEM_OFF1,           0x02},  /* LCD Memory Address Offset Register 1*/
-       {S1DREG_LCD_PIX_PAN,            0x03},  /* LCD Pixel Panning Register*/
-       {S1DREG_LCD_DISP_FIFO_HTC,      0x00},  /* LCD Display FIFO High Threshold Control Register*/
-       {S1DREG_LCD_DISP_FIFO_LTC,      0x00},  /* LCD Display FIFO Low Threshold Control Register*/
-       {S1DREG_CRT_DISP_HWIDTH,        0x4F},  /* CRT/TV Horizontal Display Width Register*/
-       {S1DREG_CRT_NDISP_HPER,         0x13},  /* CRT/TV Horizontal Non-Display Period Register*/
-       {S1DREG_CRT_HRTC_START,         0x01},  /* CRT/TV HRTC Start Position Register*/
-       {S1DREG_CRT_HRTC_PWIDTH,        0x0B},  /* CRT/TV HRTC Pulse Width Register*/
-       {S1DREG_CRT_DISP_VHEIGHT0,      0xDF},  /* CRT/TV Vertical Display Height Register 0*/
-       {S1DREG_CRT_DISP_VHEIGHT1,      0x01},  /* CRT/TV Vertical Display Height Register 1*/
-       {S1DREG_CRT_NDISP_VPER,         0x2B},  /* CRT/TV Vertical Non-Display Period Register*/
-       {S1DREG_CRT_VRTC_START,         0x09},  /* CRT/TV VRTC Start Position Register*/
-       {S1DREG_CRT_VRTC_PWIDTH,        0x01},  /* CRT/TV VRTC Pulse Width Register*/
-       {S1DREG_TV_OUT_CTL,             0x18},  /* TV Output Control Register */
-       {S1DREG_CRT_DISP_MODE,          0x05},  /* CRT/TV Display Mode Register, 16BPP*/
-       {S1DREG_CRT_DISP_START0,        0x00},  /* CRT/TV Display Start Address Register 0*/
-       {S1DREG_CRT_DISP_START1,        0x00},  /* CRT/TV Display Start Address Register 1*/
-       {S1DREG_CRT_DISP_START2,        0x00},  /* CRT/TV Display Start Address Register 2*/
-       {S1DREG_CRT_MEM_OFF0,           0x80},  /* CRT/TV Memory Address Offset Register 0*/
-       {S1DREG_CRT_MEM_OFF1,           0x02},  /* CRT/TV Memory Address Offset Register 1*/
-       {S1DREG_CRT_PIX_PAN,            0x00},  /* CRT/TV Pixel Panning Register*/
-       {S1DREG_CRT_DISP_FIFO_HTC,      0x00},  /* CRT/TV Display FIFO High Threshold Control Register*/
-       {S1DREG_CRT_DISP_FIFO_LTC,      0x00},  /* CRT/TV Display FIFO Low Threshold Control Register*/
-       {S1DREG_LCD_CUR_CTL,            0x00},  /* LCD Ink/Cursor Control Register*/
-       {S1DREG_LCD_CUR_START,          0x01},  /* LCD Ink/Cursor Start Address Register*/
-       {S1DREG_LCD_CUR_XPOS0,          0x00},  /* LCD Cursor X Position Register 0*/
-       {S1DREG_LCD_CUR_XPOS1,          0x00},  /* LCD Cursor X Position Register 1*/
-       {S1DREG_LCD_CUR_YPOS0,          0x00},  /* LCD Cursor Y Position Register 0*/
-       {S1DREG_LCD_CUR_YPOS1,          0x00},  /* LCD Cursor Y Position Register 1*/
-       {S1DREG_LCD_CUR_BCTL0,          0x00},  /* LCD Ink/Cursor Blue Color 0 Register*/
-       {S1DREG_LCD_CUR_GCTL0,          0x00},  /* LCD Ink/Cursor Green Color 0 Register*/
-       {S1DREG_LCD_CUR_RCTL0,          0x00},  /* LCD Ink/Cursor Red Color 0 Register*/
-       {S1DREG_LCD_CUR_BCTL1,          0x1F},  /* LCD Ink/Cursor Blue Color 1 Register*/
-       {S1DREG_LCD_CUR_GCTL1,          0x3F},  /* LCD Ink/Cursor Green Color 1 Register*/
-       {S1DREG_LCD_CUR_RCTL1,          0x1F},  /* LCD Ink/Cursor Red Color 1 Register*/
-       {S1DREG_LCD_CUR_FIFO_HTC,       0x00},  /* LCD Ink/Cursor FIFO Threshold Register*/
-       {S1DREG_CRT_CUR_CTL,            0x00},  /* CRT/TV Ink/Cursor Control Register*/
-       {S1DREG_CRT_CUR_START,          0x01},  /* CRT/TV Ink/Cursor Start Address Register*/
-       {S1DREG_CRT_CUR_XPOS0,          0x00},  /* CRT/TV Cursor X Position Register 0*/
-       {S1DREG_CRT_CUR_XPOS1,          0x00},  /* CRT/TV Cursor X Position Register 1*/
-       {S1DREG_CRT_CUR_YPOS0,          0x00},  /* CRT/TV Cursor Y Position Register 0*/
-       {S1DREG_CRT_CUR_YPOS1,          0x00},  /* CRT/TV Cursor Y Position Register 1*/
-       {S1DREG_CRT_CUR_BCTL0,          0x00},  /* CRT/TV Ink/Cursor Blue Color 0 Register*/
-       {S1DREG_CRT_CUR_GCTL0,          0x00},  /* CRT/TV Ink/Cursor Green Color 0 Register*/
-       {S1DREG_CRT_CUR_RCTL0,          0x00},  /* CRT/TV Ink/Cursor Red Color 0 Register*/
-       {S1DREG_CRT_CUR_BCTL1,          0x1F},  /* CRT/TV Ink/Cursor Blue Color 1 Register*/
-       {S1DREG_CRT_CUR_GCTL1,          0x3F},  /* CRT/TV Ink/Cursor Green Color 1 Register*/
-       {S1DREG_CRT_CUR_RCTL1,          0x1F},  /* CRT/TV Ink/Cursor Red Color 1 Register*/
-       {S1DREG_CRT_CUR_FIFO_HTC,       0x00},  /* CRT/TV Ink/Cursor FIFO Threshold Register*/
-       {S1DREG_BBLT_CTL0,              0x00},  /* BitBlt Control Register 0*/
-       {S1DREG_BBLT_CTL1,              0x01},  /* BitBlt Control Register 1*/
-       {S1DREG_BBLT_CC_EXP,            0x00},  /* BitBlt ROP Code/Color Expansion Register*/
-       {S1DREG_BBLT_OP,                0x00},  /* BitBlt Operation Register*/
-       {S1DREG_BBLT_SRC_START0,        0x00},  /* BitBlt Source Start Address Register 0*/
-       {S1DREG_BBLT_SRC_START1,        0x00},  /* BitBlt Source Start Address Register 1*/
-       {S1DREG_BBLT_SRC_START2,        0x00},  /* BitBlt Source Start Address Register 2*/
-       {S1DREG_BBLT_DST_START0,        0x00},  /* BitBlt Destination Start Address Register 0*/
-       {S1DREG_BBLT_DST_START1,        0x00},  /* BitBlt Destination Start Address Register 1*/
-       {S1DREG_BBLT_DST_START2,        0x00},  /* BitBlt Destination Start Address Register 2*/
-       {S1DREG_BBLT_MEM_OFF0,          0x00},  /* BitBlt Memory Address Offset Register 0*/
-       {S1DREG_BBLT_MEM_OFF1,          0x00},  /* BitBlt Memory Address Offset Register 1*/
-       {S1DREG_BBLT_WIDTH0,            0x00},  /* BitBlt Width Register 0*/
-       {S1DREG_BBLT_WIDTH1,            0x00},  /* BitBlt Width Register 1*/
-       {S1DREG_BBLT_HEIGHT0,           0x00},  /* BitBlt Height Register 0*/
-       {S1DREG_BBLT_HEIGHT1,           0x00},  /* BitBlt Height Register 1*/
-       {S1DREG_BBLT_BGC0,              0x00},  /* BitBlt Background Color Register 0*/
-       {S1DREG_BBLT_BGC1,              0x00},  /* BitBlt Background Color Register 1*/
-       {S1DREG_BBLT_FGC0,              0x00},  /* BitBlt Foreground Color Register 0*/
-       {S1DREG_BBLT_FGC1,              0x00},  /* BitBlt Foreground Color Register 1*/
-       {S1DREG_LKUP_MODE,              0x00},  /* Look-Up Table Mode Register*/
-       {S1DREG_LKUP_ADDR,              0x00},  /* Look-Up Table Address Register*/
-       {S1DREG_PS_CNF,                 0x00},  /* Power Save Configuration Register*/
-       {S1DREG_PS_STATUS,              0x00},  /* Power Save Status Register*/
-       {S1DREG_CPU2MEM_WDOGT,          0x00},  /* CPU-to-Memory Access Watchdog Timer Register*/
-       {S1DREG_COM_DISP_MODE,          0x01},  /* Display Mode Register, LCD only*/
-};
-
-static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
-       .initregs               = yl9200_s1dfb_initregs,
-       .initregssize           = ARRAY_SIZE(yl9200_s1dfb_initregs),
-       .platform_init_video    = yl9200_init_video,
-};
-
-#define YL9200_FB_REG_BASE     AT91_CHIPSELECT_7
-#define YL9200_FB_VMEM_BASE    YL9200_FB_REG_BASE + SZ_2M
-#define YL9200_FB_VMEM_SIZE    SZ_2M
-
-static struct resource yl9200_s1dfb_resource[] = {
-       [0] = { /* video mem */
-               .name   = "s1d13xxxfb memory",
-               .start  = YL9200_FB_VMEM_BASE,
-               .end    = YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = { /* video registers */
-               .name   = "s1d13xxxfb registers",
-               .start  = YL9200_FB_REG_BASE,
-               .end    = YL9200_FB_REG_BASE + SZ_512 -1,
-               .flags  = IORESOURCE_MEM,
-       },
-};
-
-static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device yl9200_s1dfb_device = {
-       .name           = "s1d13806fb",
-       .id             = -1,
-       .dev    = {
-               .dma_mask               = &s1dfb_dmamask,
-               .coherent_dma_mask      = DMA_BIT_MASK(32),
-               .platform_data          = &yl9200_s1dfb_pdata,
-       },
-       .resource       = yl9200_s1dfb_resource,
-       .num_resources  = ARRAY_SIZE(yl9200_s1dfb_resource),
-};
-
-void __init yl9200_add_device_video(void)
-{
-       platform_device_register(&yl9200_s1dfb_device);
-}
-#else
-void __init yl9200_add_device_video(void) {}
-#endif
-
-
-static void __init yl9200_board_init(void)
-{
-       /* Serial */
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-
-       /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-       at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-                       | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-                       | ATMEL_UART_RI);
-
-       /* USART0 on ttyS2. (Rx & Tx only to JP3) */
-       at91_register_uart(AT91RM9200_ID_US0, 2, 0);
-
-       /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
-       at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
-       at91_add_device_serial();
-       /* Ethernet */
-       at91_add_device_eth(&yl9200_eth_data);
-       /* USB Host */
-       at91_add_device_usbh(&yl9200_usbh_data);
-       /* USB Device */
-       at91_add_device_udc(&yl9200_udc_data);
-       /* I2C */
-       at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
-       /* MMC */
-       at91_add_device_mci(0, &yl9200_mci0_data);
-       /* NAND */
-       at91_add_device_nand(&yl9200_nand_data);
-       /* NOR Flash */
-       platform_device_register(&yl9200_flash);
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-       /* SPI */
-       at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
-       /* Touchscreen */
-       yl9200_add_device_ts();
-#endif
-       /* LEDs. */
-       at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
-       /* Push Buttons */
-       yl9200_add_device_buttons();
-       /* VGA */
-       yl9200_add_device_video();
-}
-
-MACHINE_START(YL9200, "uCdragon YL-9200")
-       /* Maintainer: S.Birtles */
-       .init_time      = at91rm9200_timer_init,
-       .map_io         = at91_map_io,
-       .handle_irq     = at91_aic_handle_irq,
-       .init_early     = yl9200_init_early,
-       .init_irq       = at91_init_irq_default,
-       .init_machine   = yl9200_board_init,
-MACHINE_END