b43: PHY: drop own channel_freq (get it from chandef when needed)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 56dfe7a..3990820 100644 (file)
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -269,7 +269,6 @@ struct b43_phy {
        /* Current channel */
        struct cfg80211_chan_def *chandef;
        unsigned int channel;
-       u16 channel_freq;
        enum nl80211_channel_type channel_type;
 
        /* PHY TX errors counter. */

diff --git a/drivers/net/wireless/b43/phy_ht.c b/drivers/net/wireless/b43/phy_ht.c
index 5d6833f..f2974c6 100644 (file)
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
@@ -596,7 +596,7 @@ static void b43_phy_ht_tx_power_ctl_setup(struct b43_wldev *dev)
        u8 target[3];
        s16 a1[3], b0[3], b1[3];
 
-       u16 freq = dev->phy.channel_freq;
+       u16 freq = dev->phy.chandef->chan->center_freq;
        int i, c;
 
        if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 86569f6..dc62f02 100644 (file)
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -798,6 +798,7 @@ static void b43_chantab_radio_2056_upload(struct b43_wldev *dev,
 static void b43_radio_2056_setup(struct b43_wldev *dev,
                                const struct b43_nphy_channeltab_entry_rev3 *e)
 {
+       struct b43_phy *phy = &dev->phy;
        struct ssb_sprom *sprom = dev->dev->bus_sprom;
        enum ieee80211_band band = b43_current_band(dev->wl);
        u16 offset;
@@ -909,7 +910,7 @@ static void b43_radio_2056_setup(struct b43_wldev *dev,
                        b43_radio_write(dev, offset | B2056_TX_PA_SPARE1, 0xee);
                }
        } else if (dev->phy.n->ipa5g_on && band == IEEE80211_BAND_5GHZ) {
-               u16 freq = dev->phy.channel_freq;
+               u16 freq = phy->chandef->chan->center_freq;
                if (freq < 5100) {
                        paa_boost = 0xA;
                        pada_boost = 0x77;
@@ -1675,6 +1676,7 @@ static int b43_nphy_poll_rssi(struct b43_wldev *dev, enum n_rssi_type rssi_type,
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICalRev3 */
 static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
 {
+       struct b43_phy *phy = &dev->phy;
        struct b43_phy_n *nphy = dev->phy.n;
 
        u16 saved_regs_phy_rfctl[2];
@@ -1897,9 +1899,9 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
 
        /* Remember for which channel we store configuration */
        if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
-               nphy->rssical_chanspec_2G.center_freq = dev->phy.channel_freq;
+               nphy->rssical_chanspec_2G.center_freq = phy->chandef->chan->center_freq;
        else
-               nphy->rssical_chanspec_5G.center_freq = dev->phy.channel_freq;
+               nphy->rssical_chanspec_5G.center_freq = phy->chandef->chan->center_freq;
 
        /* End of calibration, restore configuration */
        b43_nphy_classifier(dev, 7, class);
@@ -2528,7 +2530,7 @@ static void b43_nphy_workarounds_rev7plus(struct b43_wldev *dev)
                                }
                        }
                } else {
-                       u16 freq = phy->channel_freq;
+                       u16 freq = phy->chandef->chan->center_freq;
                        if ((freq >= 5180 && freq <= 5230) ||
                            (freq >= 5745 && freq <= 5805)) {
                                b43_radio_write(dev, 0x7D, 0xFF);
@@ -3184,12 +3186,13 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrFix */
 static void b43_nphy_tx_power_fix(struct b43_wldev *dev)
 {
+       struct b43_phy *phy = &dev->phy;
        struct b43_phy_n *nphy = dev->phy.n;
        struct ssb_sprom *sprom = dev->dev->bus_sprom;
 
        u8 txpi[2], bbmult, i;
        u16 tmp, radio_gain, dac_gain;
-       u16 freq = dev->phy.channel_freq;
+       u16 freq = phy->chandef->chan->center_freq;
        u32 txgain;
        /* u32 gaintbl; rev3+ */
 
@@ -3474,6 +3477,7 @@ static void b43_nphy_tx_prepare_adjusted_power_table(struct b43_wldev *dev)
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlSetup */
 static void b43_nphy_tx_power_ctl_setup(struct b43_wldev *dev)
 {
+       struct b43_phy *phy = &dev->phy;
        struct b43_phy_n *nphy = dev->phy.n;
        struct ssb_sprom *sprom = dev->dev->bus_sprom;
 
@@ -3483,7 +3487,7 @@ static void b43_nphy_tx_power_ctl_setup(struct b43_wldev *dev)
        s32 num, den, pwr;
        u32 regval[64];
 
-       u16 freq = dev->phy.channel_freq;
+       u16 freq = phy->chandef->chan->center_freq;
        u16 tmp;
        u16 r; /* routing */
        u8 i, c;
@@ -4500,7 +4504,7 @@ static void b43_nphy_save_cal(struct b43_wldev *dev)
                txcal_radio_regs[2] = b43_radio_read(dev, 0x8D);
                txcal_radio_regs[3] = b43_radio_read(dev, 0xBC);
        }
-       iqcal_chanspec->center_freq = dev->phy.channel_freq;
+       iqcal_chanspec->center_freq = dev->phy.chandef->chan->center_freq;
        iqcal_chanspec->channel_type = dev->phy.channel_type;
        b43_ntab_read_bulk(dev, B43_NTAB16(15, 80), 8, table);
 
@@ -4581,6 +4585,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
                                struct nphy_txgains target,
                                bool full, bool mphase)
 {
+       struct b43_phy *phy = &dev->phy;
        struct b43_phy_n *nphy = dev->phy.n;
        int i;
        int error = 0;
@@ -4773,7 +4778,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
                                                nphy->txiqlocal_bestc);
                        nphy->txiqlocal_coeffsvalid = true;
                        nphy->txiqlocal_chanspec.center_freq =
-                                                       dev->phy.channel_freq;
+                                               phy->chandef->chan->center_freq;
                        nphy->txiqlocal_chanspec.channel_type =
                                                        dev->phy.channel_type;
                } else {
@@ -4811,7 +4816,7 @@ static void b43_nphy_reapply_tx_cal_coeffs(struct b43_wldev *dev)
        bool equal = true;
 
        if (!nphy->txiqlocal_coeffsvalid ||
-           nphy->txiqlocal_chanspec.center_freq != dev->phy.channel_freq ||
+           nphy->txiqlocal_chanspec.center_freq != dev->phy.chandef->chan->center_freq ||
            nphy->txiqlocal_chanspec.channel_type != dev->phy.channel_type)
                return;
 
@@ -5502,7 +5507,6 @@ static int b43_nphy_set_channel(struct b43_wldev *dev,
        /* Channel is set later in common code, but we need to set it on our
           own to let this function's subcalls work properly. */
        phy->channel = channel->hw_value;
-       phy->channel_freq = channel->center_freq;
 
        if (b43_channel_type_is_40mhz(phy->channel_type) !=
                b43_channel_type_is_40mhz(channel_type))