/* Remote serial support interface definitions for GDB, the GNU Debugger.
- Copyright 1992, 1993 Free Software Foundation, Inc.
+ Copyright 1992, 1993, 1999, 2000 Free Software Foundation, Inc.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#ifndef SERIAL_H
#define SERIAL_H
-/* Terminal state pointer. This is specific to each type of interface. */
-
-typedef PTR serial_ttystate;
+/* For most routines, if a failure is indicated, then errno should be
+ examined. */
-struct _serial_t
-{
- int fd; /* File descriptor */
- struct serial_ops *ops; /* Function vector */
- serial_ttystate ttystate; /* Not used (yet) */
- int bufcnt; /* Amount of data in receive buffer */
- unsigned char *bufp; /* Current byte */
- unsigned char buf[BUFSIZ]; /* Da buffer itself */
- int current_timeout; /* (termio{s} only), last value of VTIME */
- /* ser-unix.c termio{,s} only, we still need to wait for this many more
- seconds. */
- int timeout_remaining;
- char *name; /* The name of the device or host */
- struct _serial_t *next; /* Pointer to the next serial_t */
- int refcnt; /* Number of pointers to this block */
-};
+/* Terminal state pointer. This is specific to each type of
+ interface. */
+typedef void *serial_ttystate;
+struct _serial_t;
typedef struct _serial_t *serial_t;
-struct serial_ops {
- char *name;
- struct serial_ops *next;
- int (*open) PARAMS ((serial_t, const char *name));
- void (*close) PARAMS ((serial_t));
- int (*readchar) PARAMS ((serial_t, int timeout));
- int (*write) PARAMS ((serial_t, const char *str, int len));
- /* Discard pending output */
- int (*flush_output) PARAMS ((serial_t));
- /* Discard pending input */
- int (*flush_input) PARAMS ((serial_t));
- int (*send_break) PARAMS ((serial_t));
- void (*go_raw) PARAMS ((serial_t));
- serial_ttystate (*get_tty_state) PARAMS ((serial_t));
- int (*set_tty_state) PARAMS ((serial_t, serial_ttystate));
- void (*print_tty_state) PARAMS ((serial_t, serial_ttystate));
- int (*noflush_set_tty_state)
- PARAMS ((serial_t, serial_ttystate, serial_ttystate));
- int (*setbaudrate) PARAMS ((serial_t, int rate));
- int (*setstopbits) PARAMS ((serial_t, int num));
- /* Wait for output to drain */
- int (*drain_output) PARAMS ((serial_t));
-};
+/* Try to open NAME. Returns a new serial_t on success, NULL on
+ failure. */
-/* Add a new serial interface to the interface list */
+extern serial_t serial_open (const char *name);
+#define SERIAL_OPEN(NAME) serial_open(NAME)
-void serial_add_interface PARAMS ((struct serial_ops *optable));
+/* Open a new serial stream using a file handle. */
-serial_t serial_open PARAMS ((const char *name));
+extern serial_t serial_fdopen (const int fd);
+#define SERIAL_FDOPEN(FD) serial_fdopen(FD)
-serial_t serial_fdopen PARAMS ((const int fd));
+/* Push out all buffers, close the device and destroy SERIAL_T. */
-/* For most routines, if a failure is indicated, then errno should be
- examined. */
+extern void serial_close (serial_t);
+#define SERIAL_CLOSE(SERIAL_T) serial_close ((SERIAL_T))
-/* Try to open NAME. Returns a new serial_t on success, NULL on failure.
- */
+/* Push out all buffers and destroy SERIAL_T without closing the
+ device. */
-#define SERIAL_OPEN(NAME) serial_open(NAME)
+extern void serial_un_fdopen (serial_t scb);
+#define SERIAL_UN_FDOPEN(SERIAL_T) serial_un_fdopen ((SERIAL_T))
-/* Open a new serial stream using a file handle. */
+/* Read one char from the serial device with TIMEOUT seconds to wait
+ or -1 to wait forever. Use timeout of 0 to effect a poll.
+ Infinite waits are not permitted. Returns unsigned char if ok, else
+ one of the following codes. Note that all error return-codes are
+ guaranteed to be < 0. */
+
+enum serial_rc {
+ SERIAL_ERROR = -1, /* General error. */
+ SERIAL_TIMEOUT = -2, /* Timeout or data-not-ready during read.
+ Unfortunately, through ui_loop_hook(), this
+ can also be a QUIT indication. */
+ SERIAL_EOF = -3 /* General end-of-file or remote target
+ connection closed, indication. Includes
+ things like the line dropping dead. */
+};
-#define SERIAL_FDOPEN(FD) serial_fdopen(FD)
+extern int serial_readchar (serial_t scb, int timeout);
+#define SERIAL_READCHAR(SERIAL_T, TIMEOUT) serial_readchar ((SERIAL_T), (TIMEOUT))
+
+/* Write LEN chars from STRING to the port SERIAL_T. Returns 0 for
+ success, non-zero for failure. */
+
+extern int serial_write (serial_t scb, const char *str, int len);
+#define SERIAL_WRITE(SERIAL_T, STRING,LEN) serial_write (SERIAL_T, STRING, LEN)
+
+/* Write a printf style string onto the serial port. */
+
+extern void serial_printf (serial_t desc, const char *,...) ATTR_FORMAT (printf, 2, 3);
/* Allow pending output to drain. */
-#define SERIAL_DRAIN_OUTPUT(SERIAL_T) \
- ((SERIAL_T)->ops->drain_output((SERIAL_T)))
-
-/* Flush (discard) pending output. Might also flush input (if this system can't flush
- only output). */
+extern int serial_drain_output (serial_t);
+#define SERIAL_DRAIN_OUTPUT(SERIAL_T) serial_drain_output ((SERIAL_T))
-#define SERIAL_FLUSH_OUTPUT(SERIAL_T) \
- ((SERIAL_T)->ops->flush_output((SERIAL_T)))
+/* Flush (discard) pending output. Might also flush input (if this
+ system can't flush only output). */
-/* Flush pending input. Might also flush output (if this system can't flush
- only input). */
+extern int serial_flush_output (serial_t);
+#define SERIAL_FLUSH_OUTPUT(SERIAL_T) serial_flush_output ((SERIAL_T))
-#define SERIAL_FLUSH_INPUT(SERIAL_T)\
- ((*(SERIAL_T)->ops->flush_input) ((SERIAL_T)))
+/* Flush pending input. Might also flush output (if this system can't
+ flush only input). */
-/* Send a break between 0.25 and 0.5 seconds long. */
+extern int serial_flush_input (serial_t);
+#define SERIAL_FLUSH_INPUT(SERIAL_T) serial_flush_input ((SERIAL_T))
-extern int serial_send_break PARAMS ((serial_t scb));
+/* Send a break between 0.25 and 0.5 seconds long. */
+extern int serial_send_break (serial_t scb);
#define SERIAL_SEND_BREAK(SERIAL_T) serial_send_break (SERIAL_T)
/* Turn the port into raw mode. */
-#define SERIAL_RAW(SERIAL_T) (SERIAL_T)->ops->go_raw((SERIAL_T))
+extern void serial_raw (serial_t scb);
+#define SERIAL_RAW(SERIAL_T) serial_raw ((SERIAL_T))
/* Return a pointer to a newly malloc'd ttystate containing the state
of the tty. */
-#define SERIAL_GET_TTY_STATE(SERIAL_T) (SERIAL_T)->ops->get_tty_state((SERIAL_T))
+
+extern serial_ttystate serial_get_tty_state (serial_t scb);
+#define SERIAL_GET_TTY_STATE(SERIAL_T) serial_get_tty_state ((SERIAL_T))
/* Set the state of the tty to TTYSTATE. The change is immediate.
When changing to or from raw mode, input might be discarded.
- Returns 0 for success, negative value for error (in which case errno
- contains the error). */
-#define SERIAL_SET_TTY_STATE(SERIAL_T, TTYSTATE) (SERIAL_T)->ops->set_tty_state((SERIAL_T), (TTYSTATE))
+ Returns 0 for success, negative value for error (in which case
+ errno contains the error). */
+
+extern int serial_set_tty_state (serial_t scb, serial_ttystate ttystate);
+#define SERIAL_SET_TTY_STATE(SERIAL_T, TTYSTATE) serial_set_tty_state ((SERIAL_T), (TTYSTATE))
+
+/* printf_filtered a user-comprehensible description of ttystate on
+ the specified STREAM. FIXME: At present this sends output to the
+ default stream - GDB_STDOUT. */
-/* printf_filtered a user-comprehensible description of ttystate. */
-#define SERIAL_PRINT_TTY_STATE(SERIAL_T, TTYSTATE) \
- ((*((SERIAL_T)->ops->print_tty_state)) ((SERIAL_T), (TTYSTATE)))
+extern void serial_print_tty_state (serial_t scb, serial_ttystate ttystate, struct ui_file *);
+#define SERIAL_PRINT_TTY_STATE(SERIAL_T, TTYSTATE, STREAM) serial_print_tty_state ((SERIAL_T), (TTYSTATE), (STREAM))
/* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the
current state (generally obtained from a recent call to
SERIAL_GET_TTY_STATE), but be careful not to discard any input.
- This means that we never switch in or out of raw mode, even
- if NEW_TTYSTATE specifies a switch. */
+ This means that we never switch in or out of raw mode, even if
+ NEW_TTYSTATE specifies a switch. */
+
+extern int serial_noflush_set_tty_state (serial_t scb, serial_ttystate new_ttystate, serial_ttystate old_ttystate);
#define SERIAL_NOFLUSH_SET_TTY_STATE(SERIAL_T, NEW_TTYSTATE, OLD_TTYSTATE) \
- ((*((SERIAL_T)->ops->noflush_set_tty_state)) \
- ((SERIAL_T), (NEW_TTYSTATE), (OLD_TTYSTATE)))
+serial_noflush_set_tty_state ((SERIAL_T), (NEW_TTYSTATE), (OLD_TTYSTATE))
-/* Read one char from the serial device with TIMEOUT seconds to wait
- or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
- char if ok, else one of the following codes. Note that all error
- codes are guaranteed to be < 0. */
+/* Set the baudrate to the decimal value supplied. Returns 0 for
+ success, -1 for failure. */
-#define SERIAL_ERROR -1 /* General error, see errno for details */
-#define SERIAL_TIMEOUT -2
-#define SERIAL_EOF -3
+extern int serial_setbaudrate (serial_t scb, int rate);
+#define SERIAL_SETBAUDRATE(SERIAL_T, RATE) serial_setbaudrate ((SERIAL_T), (RATE))
-extern int serial_readchar PARAMS ((serial_t scb, int timeout));
+/* Set the number of stop bits to the value specified. Returns 0 for
+ success, -1 for failure. */
-#define SERIAL_READCHAR(SERIAL_T, TIMEOUT) serial_readchar (SERIAL_T, TIMEOUT)
+#define SERIAL_1_STOPBITS 1
+#define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */
+#define SERIAL_2_STOPBITS 3
-/* Set the baudrate to the decimal value supplied. Returns 0 for success,
- -1 for failure. */
+extern int serial_setstopbits (serial_t scb, int num);
+#define SERIAL_SETSTOPBITS(SERIAL_T, NUM) serial_setstopbits ((SERIAL_T), (NUM))
-#define SERIAL_SETBAUDRATE(SERIAL_T, RATE) ((SERIAL_T)->ops->setbaudrate((SERIAL_T), RATE))
+/* Asynchronous serial interface: */
-/* Set the number of stop bits to the value specified. Returns 0 for success,
- -1 for failure. */
+/* Can the serial device support asynchronous mode? */
-#define SERIAL_1_STOPBITS 1
-#define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */
-#define SERIAL_2_STOPBITS 3
+extern int serial_can_async_p (serial_t scb);
+#define SERIAL_CAN_ASYNC_P(SERIAL_T) serial_can_async_p ((SERIAL_T))
-#define SERIAL_SETSTOPBITS(SERIAL_T, NUM) ((SERIAL_T)->ops->setstopbits((SERIAL_T), NUM))
+/* Has the serial device been put in asynchronous mode? */
-/* Write LEN chars from STRING to the port SERIAL_T. Returns 0 for
- success, non-zero for failure. */
+extern int serial_is_async_p (serial_t scb);
+#define SERIAL_IS_ASYNC_P(SERIAL_T) serial_is_async_p ((SERIAL_T))
-extern int serial_write PARAMS ((serial_t scb, const char *str, int len));
+/* For ASYNC enabled devices, register a callback and enable
+ asynchronous mode. To disable asynchronous mode, register a NULL
+ callback. */
-#define SERIAL_WRITE(SERIAL_T, STRING,LEN) serial_write (SERIAL_T, STRING, LEN)
+typedef void (serial_event_ftype) (serial_t scb, void *context);
+extern void serial_async (serial_t scb, serial_event_ftype *handler, void *context);
+#define SERIAL_ASYNC(SERIAL_T, HANDLER, CONTEXT) serial_async ((SERIAL_T), (HANDLER), (CONTEXT))
-/* Push out all buffers, close the device and destroy SERIAL_T. */
+/* Provide direct access to the underlying FD (if any) used to
+ implement the serial device. This interface is clearly
+ deprecated. Will call internal_error() if the operation isn't
+ applicable to the current serial device. */
+
+extern int deprecated_serial_fd (serial_t scb);
+#define DEPRECATED_SERIAL_FD(SERIAL_T) deprecated_serial_fd ((SERIAL_T))
+
+/* Trace/debug mechanism.
-extern void serial_close PARAMS ((serial_t, int));
+ SERIAL_DEBUG() enables/disables internal debugging.
+ SERIAL_DEBUG_P() indicates the current debug state. */
-#define SERIAL_CLOSE(SERIAL_T) serial_close(SERIAL_T, 1)
+extern void serial_debug (serial_t scb, int debug_p);
+#define SERIAL_DEBUG(SERIAL_T, DEBUG_P) serial_debug ((SERIAL_T), (DEBUG_P))
-/* Push out all buffers and destroy SERIAL_T without closing the device. */
+extern int serial_debug_p (serial_t scb);
+#define SERIAL_DEBUG_P(SERIAL_T) serial_debug_p ((SERIAL_T))
-#define SERIAL_UN_FDOPEN(SERIAL_T) serial_close(SERIAL_T, 0)
-extern void serial_printf PARAMS ((serial_t desc, const char *, ...))
- ATTR_FORMAT(printf, 2, 3);
+/* Details of an instance of a serial object */
+
+struct _serial_t
+ {
+ int fd; /* File descriptor */
+ struct serial_ops *ops; /* Function vector */
+ void *state; /* Local context info for open FD */
+ serial_ttystate ttystate; /* Not used (yet) */
+ int bufcnt; /* Amount of data remaining in receive
+ buffer. -ve for sticky errors. */
+ unsigned char *bufp; /* Current byte */
+ unsigned char buf[BUFSIZ]; /* Da buffer itself */
+ int current_timeout; /* (ser-unix.c termio{,s} only), last
+ value of VTIME */
+ int timeout_remaining; /* (ser-unix.c termio{,s} only), we
+ still need to wait for this many
+ more seconds. */
+ char *name; /* The name of the device or host */
+ struct _serial_t *next; /* Pointer to the next serial_t */
+ int refcnt; /* Number of pointers to this block */
+ int debug_p; /* Trace this serial devices operation. */
+ int async_state; /* Async internal state. */
+ void *async_context; /* Async event thread's context */
+ serial_event_ftype *async_handler;/* Async event handler */
+ };
+
+struct serial_ops
+ {
+ char *name;
+ struct serial_ops *next;
+ int (*open) (serial_t, const char *name);
+ void (*close) (serial_t);
+ int (*readchar) (serial_t, int timeout);
+ int (*write) (serial_t, const char *str, int len);
+ /* Discard pending output */
+ int (*flush_output) (serial_t);
+ /* Discard pending input */
+ int (*flush_input) (serial_t);
+ int (*send_break) (serial_t);
+ void (*go_raw) (serial_t);
+ serial_ttystate (*get_tty_state) (serial_t);
+ int (*set_tty_state) (serial_t, serial_ttystate);
+ void (*print_tty_state) (serial_t, serial_ttystate, struct ui_file *);
+ int (*noflush_set_tty_state) (serial_t, serial_ttystate, serial_ttystate);
+ int (*setbaudrate) (serial_t, int rate);
+ int (*setstopbits) (serial_t, int num);
+ /* Wait for output to drain */
+ int (*drain_output) (serial_t);
+ /* Change the serial device into/out of asynchronous mode, call
+ the specified function when ever there is something
+ interesting. */
+ void (*async) (serial_t scb, int async_p);
+ };
+
+/* Add a new serial interface to the interface list */
+
+extern void serial_add_interface (struct serial_ops * optable);
/* File in which to record the remote debugging session */
-extern void serial_log_command PARAMS ((const char *));
+extern void serial_log_command (const char *);
#endif /* SERIAL_H */
OSDN Git Service
