+++ /dev/null
-* Broadcom BCM7xxx Ethernet Controller (GENET)
-
-Required properties:
-- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
- "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5" or
- "brcm,bcm7712-genet-v5".
-- reg: address and length of the register set for the device
-- interrupts and/or interrupts-extended: must be two cells, the first cell
- is the general purpose interrupt line, while the second cell is the
- interrupt for the ring RX and TX queues operating in ring mode. An
- optional third interrupt cell for Wake-on-LAN can be specified.
- See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- for information on the property specifics.
-- phy-mode: see ethernet.txt file in the same directory
-- #address-cells: should be 1
-- #size-cells: should be 1
-
-Optional properties:
-- clocks: When provided, must be two phandles to the functional clocks nodes
- of the GENET block. The first phandle is the main GENET clock used during
- normal operation, while the second phandle is the Wake-on-LAN clock.
-- clock-names: When provided, names of the functional clock phandles, first
- name should be "enet" and second should be "enet-wol".
-
-- phy-handle: See ethernet.txt file in the same directory; used to describe
- configurations where a PHY (internal or external) is used.
-
-- fixed-link: When the GENET interface is connected to a MoCA hardware block or
- when operating in a RGMII to RGMII type of connection, or when the MDIO bus is
- voluntarily disabled, this property should be used to describe the "fixed link".
- See Documentation/devicetree/bindings/net/fixed-link.txt for information on
- the property specifics
-
-Required child nodes:
-
-- mdio bus node: this node should always be present regardless of the PHY
- configuration of the GENET instance
-
-MDIO bus node required properties:
-
-- compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2"
- "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5", the version
- has to match the parent node compatible property (e.g: brcm,genet-v4 pairs
- with brcm,genet-mdio-v4)
-- reg: address and length relative to the parent node base register address
-- #address-cells: address cell for MDIO bus addressing, should be 1
-- #size-cells: size of the cells for MDIO bus addressing, should be 0
-
-Ethernet PHY node properties:
-
-See Documentation/devicetree/bindings/net/phy.txt for the list of required and
-optional properties.
-
-Internal Gigabit PHY example:
-
-ethernet@f0b60000 {
- phy-mode = "internal";
- phy-handle = <&phy1>;
- mac-address = [ 00 10 18 36 23 1a ];
- compatible = "brcm,genet-v4";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- reg = <0xf0b60000 0xfc4c>;
- interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
-
- mdio@e14 {
- compatible = "brcm,genet-mdio-v4";
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- reg = <0xe14 0x8>;
-
- phy1: ethernet-phy@1 {
- max-speed = <1000>;
- reg = <0x1>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-MoCA interface / MAC to MAC example:
-
-ethernet@f0b80000 {
- phy-mode = "moca";
- fixed-link = <1 0 1000 0 0>;
- mac-address = [ 00 10 18 36 24 1a ];
- compatible = "brcm,genet-v4";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- reg = <0xf0b80000 0xfc4c>;
- interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
-
- mdio@e14 {
- compatible = "brcm,genet-mdio-v4";
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- reg = <0xe14 0x8>;
- };
-};
-
-
-External MDIO-connected Gigabit PHY/switch:
-
-ethernet@f0ba0000 {
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- mac-address = [ 00 10 18 36 26 1a ];
- compatible = "brcm,genet-v4";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- reg = <0xf0ba0000 0xfc4c>;
- interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
-
- mdio@e14 {
- compatible = "brcm,genet-mdio-v4";
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- reg = <0xe14 0x8>;
-
- phy0: ethernet-phy@0 {
- max-speed = <1000>;
- reg = <0x0>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
- };
-};
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcmgenet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Controller (GENET) binding
+
+maintainers:
+ - Doug Berger <opendmb@gmail.com>
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - brcm,genet-v1
+ - brcm,genet-v2
+ - brcm,genet-v3
+ - brcm,genet-v4
+ - brcm,genet-v5
+ - brcm,bcm2711-genet-v5
+ - brcm,bcm7712-genet-v5
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ items:
+ - description: general purpose interrupt line
+ - description: RX and TX rings interrupt line
+ - description: Wake-on-LAN interrupt line
+
+
+ clocks:
+ minItems: 1
+ items:
+ - description: main clock
+ - description: EEE clock
+ - description: Wake-on-LAN clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: enet
+ - const: enet-eee
+ - const: enet-wol
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+patternProperties:
+ "^mdio@[0-9a-f]+$":
+ type: object
+ $ref: "brcm,unimac-mdio.yaml"
+
+ description:
+ GENET internal UniMAC MDIO bus
+
+required:
+ - reg
+ - interrupts
+ - phy-mode
+ - "#address-cells"
+ - "#size-cells"
+
+allOf:
+ - $ref: ethernet-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ - |
+ ethernet@f0b60000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v4";
+ reg = <0xf0b60000 0xfc4c>;
+ interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mdio0: mdio@e14 {
+ compatible = "brcm,genet-mdio-v4";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <1000>;
+ reg = <1>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ - |
+ ethernet@f0b80000 {
+ phy-mode = "moca";
+ fixed-link = <1 0 1000 0 0>;
+ mac-address = [ 00 10 18 36 24 1a ];
+ compatible = "brcm,genet-v4";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xf0b80000 0xfc4c>;
+ interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
+
+ mdio1: mdio@e14 {
+ compatible = "brcm,genet-mdio-v4";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe14 0x8>;
+ };
+ };
+
+ - |
+ ethernet@f0ba0000 {
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ mac-address = [ 00 10 18 36 26 1a ];
+ compatible = "brcm,genet-v4";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xf0ba0000 0xfc4c>;
+ interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
+
+ mdio2: mdio@e14 {
+ compatible = "brcm,genet-mdio-v4";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe14 0x8>;
+
+ phy0: ethernet-phy@0 {
+ max-speed = <1000>;
+ reg = <0>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
OSDN Git Service
