ARM: dts: BCM5301X: Add DT for Luxul XWR-1200

Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
flash (for bootloader and NVRAM) and NAND flash (for firmware).

Signed-off-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 04fd8f0..8a403a2 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
        bcm47081-buffalo-wzr-600dhp2.dtb \
        bcm47081-buffalo-wzr-900dhp.dtb \
        bcm47081-luxul-xap-1410.dtb \
+       bcm47081-luxul-xwr-1200.dtb \
        bcm4709-asus-rt-ac87u.dtb \
        bcm4709-buffalo-wxr-1900dhp.dtb \
        bcm4709-netgear-r7000.dtb \

diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
new file mode 100644 (file)
index 0000000..c544ab3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+       compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
+       model = "Luxul XWR-1200 V1";
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       memory {
+               reg = <0x00000000 0x08000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "bcm53xx:green:power";
+                       gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "default-on";
+               };
+
+               lan3 {
+                       label = "bcm53xx:green:lan3";
+                       gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+
+               lan4 {
+                       label = "bcm53xx:green:lan4";
+                       gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+
+               wan {
+                       label = "bcm53xx:green:wan";
+                       gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+
+               lan2 {
+                       label = "bcm53xx:green:lan2";
+                       gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+
+               usb {
+                       label = "bcm53xx:green:usb";
+                       gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+
+               status {
+                       label = "bcm53xx:green:status";
+                       gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "timer";
+               };
+
+               2ghz {
+                       label = "bcm53xx:green:2ghz";
+                       gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+
+               5ghz {
+                       label = "bcm53xx:green:5ghz";
+                       gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+
+               lan1 {
+                       label = "bcm53xx:green:lan1";
+                       gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               restart {
+                       label = "Reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&usb2 {
+       vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+       status = "okay";
+};