OSDN Git Service

[PATCH] kexec: x86: add CONFIG_PYSICAL_START
authorEric W. Biederman <ebiederm@xmission.com>
Sat, 25 Jun 2005 21:57:49 +0000 (14:57 -0700)
committerLinus Torvalds <torvalds@ppc970.osdl.org>
Sat, 25 Jun 2005 23:24:48 +0000 (16:24 -0700)
For one kernel to report a crash another kernel has created we need
to have 2 kernels loaded simultaneously in memory.  To accomplish this
the two kernels need to built to run at different physical addresses.

This patch adds the CONFIG_PHYSICAL_START option to the x86 kernel
so we can do just that.  You need to know what you are doing and
the ramifications are before changing this value, and most users
won't care so I have made it depend on CONFIG_EMBEDDED

bzImage kernels will work and run at a different address when compiled
with this option but they will still load at 1MB.  If you need a kernel
loaded at a different address as well you need to boot a vmlinux.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
arch/i386/Kconfig
arch/i386/boot/compressed/head.S
arch/i386/boot/compressed/misc.c
arch/i386/kernel/vmlinux.lds.S
include/asm-i386/page.h

index 961ab20..31567f4 100644 (file)
@@ -942,6 +942,17 @@ config SECCOMP
 
 source kernel/Kconfig.hz
 
+config PHYSICAL_START
+       hex "Physical address where the kernel is loaded" if EMBEDDED
+       default "0x100000"
+       help
+         This gives the physical address where the kernel is loaded.
+         Primarily used in the case of kexec on panic where the
+         fail safe kernel needs to run at a different address than
+         the panic-ed kernel.
+
+         Don't change this unless you know what you are doing.
+
 endmenu
 
 
index c5e80b6..b5893e4 100644 (file)
@@ -25,6 +25,7 @@
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
+#include <asm/page.h>
 
        .globl startup_32
        
@@ -74,7 +75,7 @@ startup_32:
        popl %esi       # discard address
        popl %esi       # real mode pointer
        xorl %ebx,%ebx
-       ljmp $(__BOOT_CS), $0x100000
+       ljmp $(__BOOT_CS), $__PHYSICAL_START
 
 /*
  * We come here, if we were loaded high.
@@ -99,7 +100,7 @@ startup_32:
        popl %ecx       # lcount
        popl %edx       # high_buffer_start
        popl %eax       # hcount
-       movl $0x100000,%edi
+       movl $__PHYSICAL_START,%edi
        cli             # make sure we don't get interrupted
        ljmp $(__BOOT_CS), $0x1000 # and jump to the move routine
 
@@ -124,5 +125,5 @@ move_routine_start:
        movsl
        movl %ebx,%esi  # Restore setup pointer
        xorl %ebx,%ebx
-       ljmp $(__BOOT_CS), $0x100000
+       ljmp $(__BOOT_CS), $__PHYSICAL_START
 move_routine_end:
index cedc55c..e133076 100644 (file)
@@ -13,6 +13,7 @@
 #include <linux/vmalloc.h>
 #include <linux/tty.h>
 #include <asm/io.h>
+#include <asm/page.h>
 
 /*
  * gzip declarations
@@ -308,7 +309,7 @@ static void setup_normal_output_buffer(void)
 #else
        if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < 1024) error("Less than 2MB of memory");
 #endif
-       output_data = (char *)0x100000; /* Points to 1M */
+       output_data = (char *)__PHYSICAL_START; /* Normally Points to 1M */
        free_mem_end_ptr = (long)real_mode;
 }
 
@@ -333,8 +334,8 @@ static void setup_output_buffer_if_we_run_high(struct moveparams *mv)
        low_buffer_size = low_buffer_end - LOW_BUFFER_START;
        high_loaded = 1;
        free_mem_end_ptr = (long)high_buffer_start;
-       if ( (0x100000 + low_buffer_size) > ((ulg)high_buffer_start)) {
-               high_buffer_start = (uch *)(0x100000 + low_buffer_size);
+       if ( (__PHYSICAL_START + low_buffer_size) > ((ulg)high_buffer_start)) {
+               high_buffer_start = (uch *)(__PHYSICAL_START + low_buffer_size);
                mv->hcount = 0; /* say: we need not to move high_buffer */
        }
        else mv->hcount = -1;
index e17ab69..7e01a52 100644 (file)
@@ -14,7 +14,7 @@ ENTRY(phys_startup_32)
 jiffies = jiffies_64;
 SECTIONS
 {
-  . = LOAD_OFFSET + 0x100000;
+  . = __KERNEL_START;
   phys_startup_32 = startup_32 - LOAD_OFFSET;
   /* read-only */
   _text = .;                   /* Text and read-only data */
index dea8f8e..8d93f73 100644 (file)
@@ -126,9 +126,12 @@ extern int page_is_ram(unsigned long pagenr);
 
 #ifdef __ASSEMBLY__
 #define __PAGE_OFFSET          (0xC0000000)
+#define __PHYSICAL_START       CONFIG_PHYSICAL_START
 #else
 #define __PAGE_OFFSET          (0xC0000000UL)
+#define __PHYSICAL_START       ((unsigned long)CONFIG_PHYSICAL_START)
 #endif
+#define __KERNEL_START         (__PAGE_OFFSET + __PHYSICAL_START)
 
 
 #define PAGE_OFFSET            ((unsigned long)__PAGE_OFFSET)