#
# Accelerometer drivers
#
+# When adding new entries keep the list in alphabetical order
+
menu "Accelerometers"
config HID_SENSOR_ACCEL_3D
Say yes here to build support for the HID SENSOR
accelerometers 3D.
-config KXSD9
- tristate "Kionix KXSD9 Accelerometer Driver"
- depends on SPI
- help
- Say yes here to build support for the Kionix KXSD9 accelerometer.
- Currently this only supports the device via an SPI interface.
-
config IIO_ST_ACCEL_3AXIS
tristate "STMicroelectronics accelerometers 3-Axis Driver"
depends on (I2C || SPI_MASTER) && SYSFS
depends on IIO_ST_ACCEL_3AXIS
depends on IIO_ST_SENSORS_SPI
+config KXSD9
+ tristate "Kionix KXSD9 Accelerometer Driver"
+ depends on SPI
+ help
+ Say yes here to build support for the Kionix KXSD9 accelerometer.
+ Currently this only supports the device via an SPI interface.
+
endmenu
# Makefile for industrial I/O accelerometer drivers
#
+# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+obj-$(CONFIG_KXSD9) += kxsd9.o
obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
st_accel-y := st_accel_core.o
obj-$(CONFIG_IIO_ST_ACCEL_I2C_3AXIS) += st_accel_i2c.o
obj-$(CONFIG_IIO_ST_ACCEL_SPI_3AXIS) += st_accel_spi.o
-
-obj-$(CONFIG_KXSD9) += kxsd9.o
#
# ADC drivers
#
+# When adding new entries keep the list in alphabetical order
+
menu "Analog to digital converters"
config AD_SIGMA_DELTA
To compile this driver as a module, choose M here: the
module will be called ad7298.
-config AD7923
- tristate "Analog Devices AD7923 and similar ADCs driver"
+config AD7476
+ tristate "Analog Devices AD7476 and similar 1-channel ADCs driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
- Say yes here to build support for Analog Devices
- AD7904, AD7914, AD7923, AD7924 4 Channel ADCs.
+ Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
+ AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
+ AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).
+
+ If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
- module will be called ad7923.
+ module will be called ad7476.
config AD7791
tristate "Analog Devices AD7791 ADC driver"
To compile this driver as a module, choose M here: the
module will be called AD7793.
-config AD7476
- tristate "Analog Devices AD7476 and similar 1-channel ADCs driver"
+config AD7887
+ tristate "Analog Devices AD7887 ADC driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
- Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
- AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
- AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).
-
+ Say yes here to build support for Analog Devices
+ AD7887 SPI analog to digital converter (ADC).
If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
- module will be called ad7476.
+ module will be called ad7887.
-config AD7887
- tristate "Analog Devices AD7887 ADC driver"
+config AD7923
+ tristate "Analog Devices AD7923 and similar ADCs driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices
- AD7887 SPI analog to digital converter (ADC).
- If unsure, say N (but it's safe to say "Y").
+ AD7904, AD7914, AD7923, AD7924 4 Channel ADCs.
To compile this driver as a module, choose M here: the
- module will be called ad7887.
+ module will be called ad7923.
config AT91_ADC
tristate "Atmel AT91 ADC"
# Makefile for IIO ADC drivers
#
+# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
obj-$(CONFIG_AD7266) += ad7266.o
obj-$(CONFIG_AD7298) += ad7298.o
#
# Gain Amplifiers, etc.
#
+# When adding new entries keep the list in alphabetical order
+
menu "Amplifiers"
config AD8366
# Makefile iio/amplifiers
#
+# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AD8366) += ad8366.o
# instead of duplicating in each module.
#
+# When adding new entries keep the list in alphabetical order
obj-y += hid-sensors/
obj-y += st_sensors/
#
# DAC drivers
#
+# When adding new entries keep the list in alphabetical order
+
menu "Digital to analog converters"
config AD5064
To compile this driver as module choose M here: the module will be called
ad5421.
-config AD5624R_SPI
- tristate "Analog Devices AD5624/44/64R DAC spi driver"
- depends on SPI
- help
- Say yes here to build support for Analog Devices AD5624R, AD5644R and
- AD5664R converters (DAC). This driver uses the common SPI interface.
-
config AD5446
tristate "Analog Devices AD5446 and similar single channel DACs driver"
depends on (SPI_MASTER && I2C!=m) || I2C
To compile this driver as a module, choose M here: the
module will be called ad5504.
+config AD5624R_SPI
+ tristate "Analog Devices AD5624/44/64R DAC spi driver"
+ depends on SPI
+ help
+ Say yes here to build support for Analog Devices AD5624R, AD5644R and
+ AD5664R converters (DAC). This driver uses the common SPI interface.
+
+config AD5686
+ tristate "Analog Devices AD5686R/AD5685R/AD5684R DAC SPI driver"
+ depends on SPI
+ help
+ Say yes here to build support for Analog Devices AD5686R, AD5685R,
+ AD5684R, AD5791 Voltage Output Digital to
+ Analog Converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad5686.
+
config AD5755
tristate "Analog Devices AD5755/AD5755-1/AD5757/AD5735/AD5737 DAC driver"
depends on SPI_MASTER
To compile this driver as a module, choose M here: the
module will be called ad5791.
-config AD5686
- tristate "Analog Devices AD5686R/AD5685R/AD5684R DAC SPI driver"
- depends on SPI
- help
- Say yes here to build support for Analog Devices AD5686R, AD5685R,
- AD5684R, AD5791 Voltage Output Digital to
- Analog Converter.
-
- To compile this driver as a module, choose M here: the
- module will be called ad5686.
-
config AD7303
tristate "Analog Devices AD7303 DAC driver"
depends on SPI
# Makefile for industrial I/O DAC drivers
#
+# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AD5360) += ad5360.o
obj-$(CONFIG_AD5380) += ad5380.o
obj-$(CONFIG_AD5421) += ad5421.o
# Clock Distribution device drivers
# Phase-Locked Loop (PLL) frequency synthesizers
#
+# When adding new entries keep the list in alphabetical order
menu "Frequency Synthesizers DDS/PLL"
# Makefile iio/frequency
#
+# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AD9523) += ad9523.o
obj-$(CONFIG_ADF4350) += adf4350.o
#
# IIO Digital Gyroscope Sensor drivers configuration
#
+# When adding new entries keep the list in alphabetical order
+
menu "Digital gyroscope sensors"
config ADIS16080
# Makefile for industrial I/O gyroscope sensor drivers
#
+# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_ADIS16080) += adis16080.o
obj-$(CONFIG_ADIS16130) += adis16130.o
obj-$(CONFIG_ADIS16136) += adis16136.o
#
# IIO imu drivers configuration
#
+# When adding new entries keep the list in alphabetical order
+
menu "Inertial measurement units"
config ADIS16400
# Makefile for Inertial Measurement Units
#
+# When adding new entries keep the list in alphabetical order
adis16400-y := adis16400_core.o
adis16400-$(CONFIG_IIO_BUFFER) += adis16400_buffer.o
obj-$(CONFIG_ADIS16400) += adis16400.o
#
# Light sensors
#
+# When adding new entries keep the list in alphabetical order
+
menu "Light sensors"
config ADJD_S311
This driver can also be built as a module. If so, the module
will be called adjd_s311.
+config HID_SENSOR_ALS
+ depends on HID_SENSOR_HUB
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ select HID_SENSOR_IIO_COMMON
+ select HID_SENSOR_IIO_TRIGGER
+ tristate "HID ALS"
+ help
+ Say yes here to build support for the HID SENSOR
+ Ambient light sensor.
+
config SENSORS_LM3533
tristate "LM3533 ambient light sensor"
depends on MFD_LM3533
To compile this driver as a module, choose M here: the
module will be called vcnl4000.
-config HID_SENSOR_ALS
- depends on HID_SENSOR_HUB
- select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
- select HID_SENSOR_IIO_COMMON
- select HID_SENSOR_IIO_TRIGGER
- tristate "HID ALS"
- help
- Say yes here to build support for the HID SENSOR
- Ambient light sensor.
-
endmenu
# Makefile for IIO Light sensors
#
+# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_ADJD_S311) += adjd_s311.o
+obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
obj-$(CONFIG_VCNL4000) += vcnl4000.o
-obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
#
# Magnetometer sensors
#
+# When adding new entries keep the list in alphabetical order
+
menu "Magnetometer sensors"
config AK8975
# Makefile for industrial I/O Magnetometer sensor drivers
#
+# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AK8975) += ak8975.o
obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o
#
# Pressure drivers
#
+# When adding new entries keep the list in alphabetical order
+
menu "Pressure sensors"
config IIO_ST_PRESS
# Makefile for industrial I/O pressure drivers
#
+# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
st_pressure-y := st_pressure_core.o
st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o
#
# Industrial I/O standalone triggers
#
+# When adding new entries keep the list in alphabetical order
+
menu "Triggers - standalone"
config IIO_INTERRUPT_TRIGGER
# Makefile for triggers not associated with iio-devices
#
+# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_IIO_INTERRUPT_TRIGGER) += iio-trig-interrupt.o
obj-$(CONFIG_IIO_SYSFS_TRIGGER) += iio-trig-sysfs.o
OSDN Git Service
