tg3: Add tg3_eee_pull_config() function

Add tg3_eee_pull_config() to pull the settings from the hardware and
populate the eee structure.

If Link Flap Avoidance is enabled, we pull the eee settings from the hw
so as not to cause a phy reset on eee config mismatch later. This
requires moving down tg3_setup_eee() below the tg3_pull_config() to not
trample existing settings.

Reviewed-by: Ben Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 26804db..3e7bc38 100644 (file)
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -2320,6 +2320,46 @@ static void tg3_phy_apply_otp(struct tg3 *tp)
        tg3_phy_toggle_auxctl_smdsp(tp, false);
 }
 
+static void tg3_eee_pull_config(struct tg3 *tp, struct ethtool_eee *eee)
+{
+       u32 val;
+       struct ethtool_eee *dest = &tp->eee;
+
+       if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP))
+               return;
+
+       if (eee)
+               dest = eee;
+
+       if (tg3_phy_cl45_read(tp, MDIO_MMD_AN, TG3_CL45_D7_EEERES_STAT, &val))
+               return;
+
+       /* Pull eee_active */
+       if (val == TG3_CL45_D7_EEERES_STAT_LP_1000T ||
+           val == TG3_CL45_D7_EEERES_STAT_LP_100TX) {
+               dest->eee_active = 1;
+       } else
+               dest->eee_active = 0;
+
+       /* Pull lp advertised settings */
+       if (tg3_phy_cl45_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE, &val))
+               return;
+       dest->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
+
+       /* Pull advertised and eee_enabled settings */
+       if (tg3_phy_cl45_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, &val))
+               return;
+       dest->eee_enabled = !!val;
+       dest->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
+
+       /* Pull tx_lpi_enabled */
+       val = tr32(TG3_CPMU_EEE_MODE);
+       dest->tx_lpi_enabled = !!(val & TG3_CPMU_EEEMD_LPI_IN_TX);
+
+       /* Pull lpi timer value */
+       dest->tx_lpi_timer = tr32(TG3_CPMU_EEE_DBTMR1) & 0xffff;
+}
+
 static void tg3_phy_eee_adjust(struct tg3 *tp, bool current_link_up)
 {
        u32 val;
@@ -2343,11 +2383,8 @@ static void tg3_phy_eee_adjust(struct tg3 *tp, bool current_link_up)
 
                tw32(TG3_CPMU_EEE_CTRL, eeectl);
 
-               tg3_phy_cl45_read(tp, MDIO_MMD_AN,
-                                 TG3_CL45_D7_EEERES_STAT, &val);
-
-               if (val == TG3_CL45_D7_EEERES_STAT_LP_1000T ||
-                   val == TG3_CL45_D7_EEERES_STAT_LP_100TX)
+               tg3_eee_pull_config(tp, NULL);
+               if (tp->eee.eee_active)
                        tp->setlpicnt = 2;
        }
 
@@ -9493,16 +9530,17 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy)
        if (tg3_flag(tp, INIT_COMPLETE))
                tg3_abort_hw(tp, 1);
 
-       /* Enable MAC control of LPI */
-       if (tp->phy_flags & TG3_PHYFLG_EEE_CAP)
-               tg3_setup_eee(tp);
-
        if ((tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN) &&
            !(tp->phy_flags & TG3_PHYFLG_USER_CONFIGURED)) {
                tg3_phy_pull_config(tp);
+               tg3_eee_pull_config(tp, NULL);
                tp->phy_flags |= TG3_PHYFLG_USER_CONFIGURED;
        }
 
+       /* Enable MAC control of LPI */
+       if (tp->phy_flags & TG3_PHYFLG_EEE_CAP)
+               tg3_setup_eee(tp);
+
        if (reset_phy)
                tg3_phy_reset(tp);