AC_SUBST($1)])
-# serial 35 AC_PROG_LIBTOOL
+# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
fi
;;
-*-*-cygwin*)
- AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
-
+])
esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[ --disable-libtool-lock force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
])
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
AC_PROG_LD_GNU
])
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
])
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
;;
-irix*)
- ac_symcode='[BCDEGRST]'
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
-solaris*)
- ac_symcode='[BDT]'
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if AC_TRY_EVAL(ac_link) && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
- else
- echo "$progname: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-# with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
-else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
- AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
- case "$enable_ltdl_install" in
- no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
- "") enable_ltdl_install=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
- esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
])
- if test x"$enable_ltdl_install" != x"no"; then
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
fi
])
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Like AC_CONFIG_HEADER, but automatically create stamp file.
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
- --disable-libtool-lock force libtool not to do file locking"
+ --disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
--enable-targets alternative target configurations"
ac_help="$ac_help
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:594: checking host system type" >&5
+echo "configure:605: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:615: checking target system type" >&5
+echo "configure:626: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:633: checking build system type" >&5
+echo "configure:644: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:668: checking for a BSD compatible install" >&5
+echo "configure:679: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:721: checking whether build environment is sane" >&5
+echo "configure:732: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:778: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:789: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:824: checking for working aclocal" >&5
+echo "configure:835: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:837: checking for working autoconf" >&5
+echo "configure:848: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:850: checking for working automake" >&5
+echo "configure:861: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:863: checking for working autoheader" >&5
+echo "configure:874: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:876: checking for working makeinfo" >&5
+echo "configure:887: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:962: checking for $ac_word" >&5
+echo "configure:973: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:992: checking for $ac_word" >&5
+echo "configure:1003: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1022: checking for $ac_word" >&5
+echo "configure:1033: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1073: checking for $ac_word" >&5
+echo "configure:1084: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1105: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1116: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1116 "configure"
+#line 1127 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1121: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1147: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1158: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1152: checking whether we are using GNU C" >&5
+echo "configure:1163: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1161: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1172: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1180: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1191: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1223: checking for ld used by GCC" >&5
+echo "configure:1234: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1247: checking for GNU ld" >&5
+echo "configure:1258: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1250: checking for non-GNU ld" >&5
+echo "configure:1261: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1286: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1296: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1302: checking for BSD-compatible nm" >&5
+echo "configure:1312: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1340: checking command to parse $NM output" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
- ;;
-irix*)
- ac_symcode='[BCDEGRST]'
- ;;
-solaris*)
- ac_symcode='[BDT]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if { (eval echo configure:1403: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if { (eval echo configure:1407: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo configure:1459: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&5
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1505: checking for _ prefix in compiled symbols" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1514: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if { (eval echo configure:1517: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&5
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1543: checking whether ln -s works" >&5
+echo "configure:1348: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test $host != $build; then
- ac_tool_prefix=${host_alias}-
-else
- ac_tool_prefix=
-fi
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1585 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1586: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1397 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1398: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1607: checking whether the C compiler needs -belf" >&5
+echo "configure:1419: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1612 "configure"
+#line 1424 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
fi
;;
-*-*-cygwin*)
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1642: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1674: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1709: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1741: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="as"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- AS="false"
-fi
-fi
-
-
- ;;
esac
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
- need_locks=$enableval
-else
- need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
-
# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1910: checking for $ac_word" >&5
+echo "configure:1571: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1940: checking for $ac_word" >&5
+echo "configure:1601: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1991: checking for $ac_word" >&5
+echo "configure:1652: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2023: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1684: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2034 "configure"
+#line 1695 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1700: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2065: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1726: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2070: checking whether we are using GNU C" >&5
+echo "configure:1731: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2079: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1740: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2098: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1759: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2141: checking for a BSD compatible install" >&5
+echo "configure:1802: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ALL_LINGUAS=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2196: checking how to run the C preprocessor" >&5
+echo "configure:1857: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2211 "configure"
+#line 1872 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2217: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1878: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2228 "configure"
+#line 1889 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2234: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1895: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2245 "configure"
+#line 1906 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2251: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1912: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:2276: checking for POSIXized ISC" >&5
+echo "configure:1937: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2297: checking for ANSI C header files" >&5
+echo "configure:1958: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2302 "configure"
+#line 1963 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2310: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1971: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2327 "configure"
+#line 1988 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2345 "configure"
+#line 2006 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2366 "configure"
+#line 2027 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2401: checking for working const" >&5
+echo "configure:2062: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2406 "configure"
+#line 2067 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2455: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2116: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2476: checking for inline" >&5
+echo "configure:2137: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2483 "configure"
+#line 2144 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2490: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2151: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2516: checking for off_t" >&5
+echo "configure:2177: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2521 "configure"
+#line 2182 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2549: checking for size_t" >&5
+echo "configure:2210: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2554 "configure"
+#line 2215 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2584: checking for working alloca.h" >&5
+echo "configure:2245: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2589 "configure"
+#line 2250 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2617: checking for alloca" >&5
+echo "configure:2278: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2622 "configure"
+#line 2283 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2311: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2682: checking whether alloca needs Cray hooks" >&5
+echo "configure:2343: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2687 "configure"
+#line 2348 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2712: checking for $ac_func" >&5
+echo "configure:2373: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2717 "configure"
+#line 2378 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2767: checking stack direction for C alloca" >&5
+echo "configure:2428: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2775 "configure"
+#line 2436 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2819: checking for $ac_hdr" >&5
+echo "configure:2480: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2824 "configure"
+#line 2485 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2490: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2858: checking for $ac_func" >&5
+echo "configure:2519: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2863 "configure"
+#line 2524 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2911: checking for working mmap" >&5
+echo "configure:2572: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2919 "configure"
+#line 2580 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2720: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3087: checking for $ac_hdr" >&5
+echo "configure:2748: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3092 "configure"
+#line 2753 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2758: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3127: checking for $ac_func" >&5
+echo "configure:2788: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3132 "configure"
+#line 2793 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3155: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3184: checking for $ac_func" >&5
+echo "configure:2845: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3189 "configure"
+#line 2850 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2873: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3246: checking for LC_MESSAGES" >&5
+echo "configure:2907: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3251 "configure"
+#line 2912 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:3258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2919: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3279: checking whether NLS is requested" >&5
+echo "configure:2940: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3299: checking whether included gettext is requested" >&5
+echo "configure:2960: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3318: checking for libintl.h" >&5
+echo "configure:2979: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3323 "configure"
+#line 2984 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3328: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2989: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3345: checking for gettext in libc" >&5
+echo "configure:3006: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3350 "configure"
+#line 3011 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3373: checking for bindtextdomain in -lintl" >&5
+echo "configure:3034: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3381 "configure"
+#line 3042 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:3392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3053: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3408: checking for gettext in libintl" >&5
+echo "configure:3069: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3413 "configure"
+#line 3074 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3448: checking for $ac_word" >&5
+echo "configure:3109: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3482: checking for $ac_func" >&5
+echo "configure:3143: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3487 "configure"
+#line 3148 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3510: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3537: checking for $ac_word" >&5
+echo "configure:3198: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3573: checking for $ac_word" >&5
+echo "configure:3234: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 3605 "configure"
+#line 3266 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3274: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3645: checking for $ac_word" >&5
+echo "configure:3306: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3679: checking for $ac_word" >&5
+echo "configure:3340: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3715: checking for $ac_word" >&5
+echo "configure:3376: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3805: checking for catalogs to be installed" >&5
+echo "configure:3466: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3833: checking for linux/version.h" >&5
+echo "configure:3494: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3838 "configure"
+#line 3499 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3843: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3504: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:3906: checking for Cygwin environment" >&5
+echo "configure:3567: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3911 "configure"
+#line 3572 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:3922: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3583: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:3939: checking for mingw32 environment" >&5
+echo "configure:3600: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3944 "configure"
+#line 3605 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:3951: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3612: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:3970: checking for executable suffix" >&5
+echo "configure:3631: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:3980: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:3641: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.o | *.obj) ;;
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4006: checking for $ac_word" >&5
+echo "configure:3667: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4042: checking for $ac_word" >&5
+echo "configure:3703: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4075: checking for $ac_word" >&5
+echo "configure:3736: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:4109: checking for yywrap in -l$ac_lib" >&5
+echo "configure:3770: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4117 "configure"
+#line 3778 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:4128: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3789: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:4151: checking lex output file root" >&5
+echo "configure:3812: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:4172: checking whether yytext is a pointer" >&5
+echo "configure:3833: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 4184 "configure"
+#line 3845 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:4191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3852: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4214: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:3875: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4248: checking for $ac_hdr" >&5
+echo "configure:3909: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4253 "configure"
+#line 3914 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4258: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3919: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4287: checking for $ac_func" >&5
+echo "configure:3948: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4292 "configure"
+#line 3953 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3976: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:4344: checking for $ac_hdr that defines DIR" >&5
+echo "configure:4005: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4349 "configure"
+#line 4010 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:4357: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4018: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:4382: checking for opendir in -ldir" >&5
+echo "configure:4043: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4390 "configure"
+#line 4051 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:4423: checking for opendir in -lx" >&5
+echo "configure:4084: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4431 "configure"
+#line 4092 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
esac
echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:4475: checking whether strstr must be declared" >&5
+echo "configure:4136: checking whether strstr must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4480 "configure"
+#line 4141 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) strstr
; return 0; }
EOF
-if { (eval echo configure:4501: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4162: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strstr=no
else
fi
echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:4522: checking whether free must be declared" >&5
+echo "configure:4183: checking whether free must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4527 "configure"
+#line 4188 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) free
; return 0; }
EOF
-if { (eval echo configure:4548: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4209: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_free=no
else
fi
echo $ac_n "checking whether sbrk must be declared""... $ac_c" 1>&6
-echo "configure:4569: checking whether sbrk must be declared" >&5
+echo "configure:4230: checking whether sbrk must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4574 "configure"
+#line 4235 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) sbrk
; return 0; }
EOF
-if { (eval echo configure:4595: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4256: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_sbrk=no
else
fi
echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:4616: checking whether getenv must be declared" >&5
+echo "configure:4277: checking whether getenv must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4621 "configure"
+#line 4282 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) getenv
; return 0; }
EOF
-if { (eval echo configure:4642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4303: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_getenv=no
else
fi
echo $ac_n "checking whether environ must be declared""... $ac_c" 1>&6
-echo "configure:4663: checking whether environ must be declared" >&5
+echo "configure:4324: checking whether environ must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_environ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4668 "configure"
+#line 4329 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) environ
; return 0; }
EOF
-if { (eval echo configure:4689: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4350: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_environ=no
else
# constants, while still supporting pre-ANSI compilers which do not
# support string concatenation.
echo $ac_n "checking whether ANSI C string concatenation works""... $ac_c" 1>&6
-echo "configure:4717: checking whether ANSI C string concatenation works" >&5
+echo "configure:4378: checking whether ANSI C string concatenation works" >&5
if eval "test \"`echo '$''{'ld_cv_string_concatenation'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4722 "configure"
+#line 4383 "configure"
#include "confdefs.h"
int main() {
char *a = "a" "a";
; return 0; }
EOF
-if { (eval echo configure:4729: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4390: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ld_cv_string_concatenation=yes
else
s%@SET_MAKE@%$SET_MAKE%g
s%@RANLIB@%$RANLIB%g
s%@CC@%$CC%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
s%@LIBTOOL@%$LIBTOOL%g
s%@CPP@%$CPP%g
s%@ALLOCA@%$ALLOCA%g
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-06-03 03:11-0700\n"
+"POT-Creation-Date: 2000-02-25 22:20-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: ENCODING\n"
-#: emultempl/armcoff.em:65
+#: emultempl/armcoff.em:69
msgid " --support-old-code Support interworking with old code\n"
msgstr ""
-#: emultempl/armcoff.em:130
+#: emultempl/armcoff.em:70
+msgid " --thumb-entry=<sym> Set the entry point to be Thumb symbol <sym>\n"
+msgstr ""
+
+#: emultempl/armcoff.em:139
#, c-format
msgid "Errors encountered processing file %s"
msgstr ""
-#: emultempl/pe.em:198
+#: emultempl/armcoff.em:205 emultempl/pe.em:1030
+msgid "%P: warning: '--thumb-entry %s' is overriding '-e %s'\n"
+msgstr ""
+
+#: emultempl/armcoff.em:210 emultempl/pe.em:1035
+msgid "%P: warning: connot find thumb start symbol %s\n"
+msgstr ""
+
+#: emultempl/pe.em:255
msgid ""
" --base_file <basefile> Generate a base file for relocatable "
"DLLs\n"
msgstr ""
-#: emultempl/pe.em:199
+#: emultempl/pe.em:256
msgid ""
" --dll Set image base to the default for DLLs\n"
msgstr ""
-#: emultempl/pe.em:200
+#: emultempl/pe.em:257
msgid " --file-alignment <size> Set file alignment\n"
msgstr ""
-#: emultempl/pe.em:201
+#: emultempl/pe.em:258
msgid " --heap <size> Set initial size of the heap\n"
msgstr ""
-#: emultempl/pe.em:202
+#: emultempl/pe.em:259
msgid ""
" --image-base <address> Set start address of the executable\n"
msgstr ""
-#: emultempl/pe.em:203
+#: emultempl/pe.em:260
msgid ""
" --major-image-version <number> Set version number of the executable\n"
msgstr ""
-#: emultempl/pe.em:204
+#: emultempl/pe.em:261
msgid " --major-os-version <number> Set minimum required OS version\n"
msgstr ""
-#: emultempl/pe.em:205
+#: emultempl/pe.em:262
msgid ""
" --major-subsystem-version <number> Set minimum required OS subsystem "
"version\n"
msgstr ""
-#: emultempl/pe.em:206
+#: emultempl/pe.em:263
msgid ""
" --minor-image-version <number> Set revision number of the executable\n"
msgstr ""
-#: emultempl/pe.em:207
+#: emultempl/pe.em:264
msgid " --minor-os-version <number> Set minimum required OS revision\n"
msgstr ""
-#: emultempl/pe.em:208
+#: emultempl/pe.em:265
msgid ""
" --minor-subsystem-version <number> Set minimum required OS subsystem "
"revision\n"
msgstr ""
-#: emultempl/pe.em:209
+#: emultempl/pe.em:266
msgid " --section-alignment <size> Set section alignment\n"
msgstr ""
-#: emultempl/pe.em:210
+#: emultempl/pe.em:267
msgid " --stack <size> Set size of the initial stack\n"
msgstr ""
-#: emultempl/pe.em:211
+#: emultempl/pe.em:268
msgid ""
" --subsystem <name>[:<version>] Set required OS subsystem [& version]\n"
msgstr ""
-#: emultempl/pe.em:212
+#: emultempl/pe.em:269
msgid ""
" --support-old-code Support interworking with old code\n"
msgstr ""
-#: emultempl/pe.em:214
+#: emultempl/pe.em:270
+msgid ""
+" --thumb-entry=<symbol> Set the entry point to be Thumb "
+"<symbol>\n"
+msgstr ""
+
+#: emultempl/pe.em:272
msgid ""
" --add-stdcall-alias Export symbols with and without @nn\n"
msgstr ""
-#: emultempl/pe.em:215
+#: emultempl/pe.em:273
msgid " --disable-stdcall-fixup Don't link _sym to _sym@nn\n"
msgstr ""
-#: emultempl/pe.em:216
+#: emultempl/pe.em:274
msgid ""
" --enable-stdcall-fixup Link _sym to _sym@nn without warnings\n"
msgstr ""
-#: emultempl/pe.em:217
+#: emultempl/pe.em:275
msgid ""
" --exclude-symbols sym,sym,... Exclude symbols from automatic export\n"
msgstr ""
-#: emultempl/pe.em:218
+#: emultempl/pe.em:276
msgid ""
" --export-all-symbols Automatically export all globals to "
"DLL\n"
msgstr ""
-#: emultempl/pe.em:219
+#: emultempl/pe.em:277
msgid " --kill-at Remove @nn from exported symbols\n"
msgstr ""
-#: emultempl/pe.em:220
+#: emultempl/pe.em:278
msgid " --out-implib <file> Generate import library\n"
msgstr ""
-#: emultempl/pe.em:221
+#: emultempl/pe.em:279
msgid ""
" --output-def <file> Generate a .DEF file for the built DLL\n"
msgstr ""
-#: emultempl/pe.em:284
+#: emultempl/pe.em:280
+msgid " --warn-duplicate-exports Warn about duplicate exports.\n"
+msgstr ""
+
+#: emultempl/pe.em:281
+msgid ""
+" --compat-implib Create backward compatible import "
+"libs;\n"
+msgstr ""
+
+#: emultempl/pe.em:282
+msgid " create __imp_<SYMBOL> as well.\n"
+msgstr ""
+
+#: emultempl/pe.em:350
msgid "%P: warning: bad version number in -subsystem option\n"
msgstr ""
-#: emultempl/pe.em:300
+#: emultempl/pe.em:386
msgid "%P%F: invalid subsystem type %s\n"
msgstr ""
-#: emultempl/pe.em:315
+#: emultempl/pe.em:401
msgid "%P%F: invalid hex number for PE parameter '%s'\n"
msgstr ""
-#: emultempl/pe.em:333
+#: emultempl/pe.em:419
msgid "%P%F: strange hex info for PE parameter '%s'\n"
msgstr ""
-#: emultempl/pe.em:372
+#: emultempl/pe.em:458
#, c-format
msgid "%s: Can't open base file %s\n"
msgstr ""
-#: emultempl/pe.em:505
+#: emultempl/pe.em:600
msgid "%P: warning, file alignment > section alignment.\n"
msgstr ""
-#: emultempl/pe.em:575 emultempl/pe.em:601
+#: emultempl/pe.em:670 emultempl/pe.em:696
#, c-format
msgid "Warning: resolving %s by linking to %s\n"
msgstr ""
-#: emultempl/pe.em:580 emultempl/pe.em:606
+#: emultempl/pe.em:675 emultempl/pe.em:701
msgid "Use --enable-stdcall-fixup to disable these warnings\n"
msgstr ""
-#: emultempl/pe.em:581 emultempl/pe.em:607
+#: emultempl/pe.em:676 emultempl/pe.em:702
msgid "Use --disable-stdcall-fixup to disable these fixups\n"
msgstr ""
-#: emultempl/pe.em:623
+#: emultempl/pe.em:718
msgid "%F%P: PE operations on non PE file.\n"
msgstr ""
-#: emultempl/pe.em:724
+#: emultempl/pe.em:835
#, c-format
msgid "Errors encountered processing file %s\n"
msgstr ""
-#: emultempl/pe.em:747
+#: emultempl/pe.em:858
#, c-format
msgid "Errors encountered processing file %s for interworking"
msgstr ""
-#: emultempl/pe.em:802 ldlang.c:1657 ldlang.c:3934 ldlang.c:3968 ldmain.c:992
+#: emultempl/pe.em:913 ldlang.c:1961 ldlang.c:4333 ldlang.c:4367 ldmain.c:996
msgid "%P%F: bfd_link_hash_lookup failed: %E\n"
msgstr ""
msgid "%B%F: could not read symbols; %E\n"
msgstr ""
-#: ldcref.c:445 ldmain.c:1060 ldmain.c:1064
+#: ldcref.c:445 ldmain.c:1064 ldmain.c:1068
msgid "%B%F: could not read symbols: %E\n"
msgstr ""
-#: ldcref.c:517 ldcref.c:524 ldmain.c:1110 ldmain.c:1117
+#: ldcref.c:517 ldcref.c:524 ldmain.c:1114 ldmain.c:1121
msgid "%B%F: could not read relocs: %E\n"
msgstr ""
"\n"
msgstr ""
-#: ldemul.c:223
+#: ldemul.c:224
msgid "%S SYSLIB ignored\n"
msgstr ""
-#: ldemul.c:231
+#: ldemul.c:232
msgid "%S HLL ignored\n"
msgstr ""
-#: ldemul.c:252
+#: ldemul.c:253
msgid "%P: unrecognised emulation mode: %s\n"
msgstr ""
-#: ldemul.c:253
+#: ldemul.c:254
msgid "Supported emulations: "
msgstr ""
-#: ldemul.c:297
+#: ldemul.c:298
msgid " no emulation specific options.\n"
msgstr ""
-#: ldexp.c:156
+#: ldexp.c:157
msgid "%F%P: %s uses undefined section %s\n"
msgstr ""
-#: ldexp.c:158
+#: ldexp.c:159
msgid "%F%P: %s forward reference of section %s\n"
msgstr ""
-#: ldexp.c:270
+#: ldexp.c:271
msgid "%F%S %% by zero\n"
msgstr ""
-#: ldexp.c:277
+#: ldexp.c:278
msgid "%F%S / by zero\n"
msgstr ""
-#: ldexp.c:400
+#: ldexp.c:401
msgid "%X%S: unresolvable symbol `%s' referenced in expression\n"
msgstr ""
-#: ldexp.c:419
+#: ldexp.c:420
msgid "%F%S: undefined symbol `%s' referenced in expression\n"
msgstr ""
-#: ldexp.c:600
+#: ldexp.c:602
msgid "%F%S can not PROVIDE assignment to location counter\n"
msgstr ""
-#: ldexp.c:610
+#: ldexp.c:612
msgid "%F%S invalid assignment to location counter\n"
msgstr ""
-#: ldexp.c:614
+#: ldexp.c:616
msgid "%F%S assignment to location counter invalid outside of SECTION\n"
msgstr ""
-#: ldexp.c:624
+#: ldexp.c:626
msgid "%F%S cannot move location counter backwards (from %V to %V)\n"
msgstr ""
-#: ldexp.c:652
+#: ldexp.c:654
msgid "%P%F:%s: hash creation failed\n"
msgstr ""
-#: ldexp.c:949
+#: ldexp.c:951
msgid "%F%S nonconstant expression for %s\n"
msgstr ""
-#: ldexp.c:982
+#: ldexp.c:984
msgid "%F%S non constant expression for %s\n"
msgstr ""
-#: ldfile.c:109
+#: ldfile.c:106
#, c-format
msgid "attempt to open %s failed\n"
msgstr ""
-#: ldfile.c:111
+#: ldfile.c:108
#, c-format
msgid "attempt to open %s succeeded\n"
msgstr ""
-#: ldfile.c:119
+#: ldfile.c:114
msgid "%F%P: invalid BFD target `%s'\n"
msgstr ""
-#: ldfile.c:204
+#: ldfile.c:136
+msgid "%P: skipping incompatible %s when searching for %s"
+msgstr ""
+
+#: ldfile.c:227
msgid "%F%P: cannot open %s for %s: %E\n"
msgstr ""
-#: ldfile.c:207
+#: ldfile.c:230
msgid "%F%P: cannot open %s: %E\n"
msgstr ""
-#: ldfile.c:225
+#: ldfile.c:250
msgid "%F%P: cannot find %s\n"
msgstr ""
-#: ldfile.c:243 ldfile.c:258
+#: ldfile.c:268 ldfile.c:283
#, c-format
msgid "cannot find script file %s\n"
msgstr ""
-#: ldfile.c:245 ldfile.c:260
+#: ldfile.c:270 ldfile.c:285
#, c-format
msgid "opened script file %s\n"
msgstr ""
-#: ldfile.c:303
+#: ldfile.c:328
msgid "%P%F: cannot open linker script file %s: %E\n"
msgstr ""
-#: ldfile.c:344
+#: ldfile.c:369
msgid "%P%F: unknown architecture: %s\n"
msgstr ""
-#: ldfile.c:361
+#: ldfile.c:386
msgid "%P%F: target architecture respecified\n"
msgstr ""
-#: ldfile.c:414
+#: ldfile.c:439
msgid "%P%F: cannot represent machine `%s'\n"
msgstr ""
-#: ldlang.c:723
+#: ldlang.c:736
msgid ""
"\n"
"Memory Configuration\n"
"\n"
msgstr ""
-#: ldlang.c:725
+#: ldlang.c:738
msgid "Name"
msgstr ""
-#: ldlang.c:725
+#: ldlang.c:738
msgid "Origin"
msgstr ""
-#: ldlang.c:725
+#: ldlang.c:738
msgid "Length"
msgstr ""
-#: ldlang.c:725
+#: ldlang.c:738
msgid "Attributes"
msgstr ""
-#: ldlang.c:767
+#: ldlang.c:780
msgid ""
"\n"
"Linker script and memory map\n"
"\n"
msgstr ""
-#: ldlang.c:784
+#: ldlang.c:797
msgid "%P%F: Illegal use of `%s' section"
msgstr ""
-#: ldlang.c:794
+#: ldlang.c:807
msgid "%P%F: output format %s cannot represent section called %s\n"
msgstr ""
-#: ldlang.c:915
+#: ldlang.c:970
msgid "%P: %B: warning: ignoring duplicate section `%s'\n"
msgstr ""
-#: ldlang.c:929
+#: ldlang.c:973
+msgid "%P: %B: warning: ignoring duplicate `%s' section symbol `%s'\n"
+msgstr ""
+
+#: ldlang.c:987
msgid "%P: %B: warning: duplicate section `%s' has different size\n"
msgstr ""
-#: ldlang.c:1320
+#: ldlang.c:1039
+msgid "%P%F: Failed to create hash table\n"
+msgstr ""
+
+#: ldlang.c:1422
msgid "%B: file not recognized: %E\n"
msgstr ""
-#: ldlang.c:1321
+#: ldlang.c:1423
msgid "%B: matching formats:"
msgstr ""
-#: ldlang.c:1328
+#: ldlang.c:1430
msgid "%F%B: file not recognized: %E\n"
msgstr ""
-#: ldlang.c:1381
+#: ldlang.c:1483
msgid "%F%B: object %B in archive is not object\n"
msgstr ""
-#: ldlang.c:1387 ldlang.c:1399
+#: ldlang.c:1489 ldlang.c:1501
msgid "%F%B: could not read symbols: %E\n"
msgstr ""
-#: ldlang.c:1452
+#: ldlang.c:1747
+msgid ""
+"%P: warning: could not find any targets that match endianness requirement\n"
+msgstr ""
+
+#: ldlang.c:1759
msgid "%P%F: target %s not found\n"
msgstr ""
-#: ldlang.c:1454
+#: ldlang.c:1761
msgid "%P%F: cannot open output file %s: %E\n"
msgstr ""
-#: ldlang.c:1462
+#: ldlang.c:1769
msgid "%P%F:%s: can not make object file: %E\n"
msgstr ""
-#: ldlang.c:1466
+#: ldlang.c:1773
msgid "%P%F:%s: can not set architecture: %E\n"
msgstr ""
-#: ldlang.c:1470
+#: ldlang.c:1777
msgid "%P%F: can not create link hash table: %E\n"
msgstr ""
-#: ldlang.c:1780
+#: ldlang.c:2084
msgid " load address 0x%V"
msgstr ""
-#: ldlang.c:1909
+#: ldlang.c:2214
msgid "%W (size before relaxing)\n"
msgstr ""
-#: ldlang.c:1988
+#: ldlang.c:2296
#, c-format
msgid "Address of section %s set to "
msgstr ""
-#: ldlang.c:2127
+#: ldlang.c:2445
#, c-format
msgid "Fail with %d\n"
msgstr ""
-#: ldlang.c:2357
+#: ldlang.c:2684
msgid "%X%P: section %s [%V -> %V] overlaps section %s [%V -> %V]\n"
msgstr ""
-#: ldlang.c:2408
+#: ldlang.c:2718
+msgid "%X%P: address 0x%v of %B section %s is not within region %s\n"
+msgstr ""
+
+#: ldlang.c:2726
+msgid "%X%P: region %s is full (%B section %s)\n"
+msgstr ""
+
+#: ldlang.c:2775
msgid "%P%X: Internal error on COFF shared library section %s\n"
msgstr ""
-#: ldlang.c:2449
+#: ldlang.c:2816
msgid "%P: warning: no memory region specified for section `%s'\n"
msgstr ""
-#: ldlang.c:2462
+#: ldlang.c:2829
msgid "%P: warning: changing start of section %s by %u bytes\n"
msgstr ""
-#: ldlang.c:2476
+#: ldlang.c:2843
msgid "%F%S: non constant address expression for section %s\n"
msgstr ""
-#: ldlang.c:2528
-msgid "%X%P: address 0x%v of %B section %s is not within region %s\n"
-msgstr ""
-
-#: ldlang.c:2536
-msgid "%X%P: region %s is full (%B section %s)\n"
+#: ldlang.c:2907
+msgid "%X%P: use an absolute load address or a load memory region, not both\n"
msgstr ""
-#: ldlang.c:2638
+#: ldlang.c:3020
msgid "%P%F: can't relax section: %E\n"
msgstr ""
-#: ldlang.c:2799
+#: ldlang.c:3185
msgid "%F%P: invalid data statement\n"
msgstr ""
-#: ldlang.c:2828
+#: ldlang.c:3222
msgid "%F%P: invalid reloc statement\n"
msgstr ""
-#: ldlang.c:2962
+#: ldlang.c:3358
msgid "%P%F:%s: can't set start address\n"
msgstr ""
-#: ldlang.c:2975 ldlang.c:2992
+#: ldlang.c:3371 ldlang.c:3388
msgid "%P%F: can't set start address\n"
msgstr ""
-#: ldlang.c:2987
+#: ldlang.c:3383
msgid "%P: warning: cannot find entry symbol %s; defaulting to %V\n"
msgstr ""
-#: ldlang.c:2997
+#: ldlang.c:3393
msgid "%P: warning: cannot find entry symbol %s; not setting start address\n"
msgstr ""
-#: ldlang.c:3039
+#: ldlang.c:3435
msgid ""
"%P: warning: %s architecture of input file `%B' is incompatible with %s "
"output\n"
msgstr ""
-#: ldlang.c:3057
+#: ldlang.c:3453
msgid "%E%X: failed to merge target specific data of file %B\n"
msgstr ""
-#: ldlang.c:3142
+#: ldlang.c:3540
msgid ""
"\n"
"Allocating common symbols\n"
msgstr ""
-#: ldlang.c:3143
+#: ldlang.c:3541
msgid ""
"Common symbol size file\n"
"\n"
#. This message happens when using the
#. svr3.ifile linker script, so I have
#. disabled it.
-#: ldlang.c:3232
+#: ldlang.c:3626
msgid "%P: no [COMMON] command, defaulting to .bss\n"
msgstr ""
-#: ldlang.c:3295
+#: ldlang.c:3686
msgid "%P%F: invalid syntax in flags\n"
msgstr ""
-#: ldlang.c:3891
+#: ldlang.c:4281
msgid "%P%Fmultiple STARTUP files\n"
msgstr ""
-#: ldlang.c:4153
+#: ldlang.c:4553
msgid "%F%P: bfd_record_phdr failed: %E\n"
msgstr ""
-#: ldlang.c:4172
+#: ldlang.c:4572
msgid "%X%P: section `%s' assigned to non-existent phdr `%s'\n"
msgstr ""
-#: ldlang.c:4471
+#: ldlang.c:4881
msgid "%X%P: unknown language `%s' in version information\n"
msgstr ""
-#: ldlang.c:4520
+#: ldlang.c:4930
msgid "%X%P: duplicate version tag `%s'\n"
msgstr ""
-#: ldlang.c:4533 ldlang.c:4546
+#: ldlang.c:4943 ldlang.c:4956
msgid "%X%P: duplicate expression `%s' in version information\n"
msgstr ""
-#: ldlang.c:4583
+#: ldlang.c:4993
msgid "%X%P: unable to find version dependency `%s'\n"
msgstr ""
-#: ldlang.c:4605
+#: ldlang.c:5015
msgid "%X%P: unable to read .exports section contents"
msgstr ""
msgid "%X%P: can't set BFD default target to `%s': %E\n"
msgstr ""
-#: ldmain.c:258
+#: ldmain.c:262
msgid "%P%F: -r and --mpc860c0 may not be used together\n"
msgstr ""
-#: ldmain.c:260
+#: ldmain.c:264
msgid "%P%F: --relax and -r may not be used together\n"
msgstr ""
-#: ldmain.c:262
+#: ldmain.c:266
msgid "%P%F: -r and -shared may not be used together\n"
msgstr ""
-#: ldmain.c:291
+#: ldmain.c:295
msgid "using internal linker script:\n"
msgstr ""
-#: ldmain.c:310
+#: ldmain.c:314
msgid "%P%F: no input files\n"
msgstr ""
-#: ldmain.c:315
+#: ldmain.c:319
msgid "%P: mode %s\n"
msgstr ""
-#: ldmain.c:333
+#: ldmain.c:337
msgid "%P%F: cannot open map file %s: %E\n"
msgstr ""
-#: ldmain.c:379
+#: ldmain.c:383
msgid "%P: link errors found, deleting executable `%s'\n"
msgstr ""
-#: ldmain.c:390
+#: ldmain.c:394
msgid "%F%B: final close failed: %E\n"
msgstr ""
-#: ldmain.c:414
+#: ldmain.c:418
msgid "%X%P: unable to open for source of copy `%s'\n"
msgstr ""
-#: ldmain.c:416
+#: ldmain.c:420
msgid "%X%P: unable to open for destination of copy `%s'\n"
msgstr ""
-#: ldmain.c:422
+#: ldmain.c:426
msgid "%P: Error writing file `%s'\n"
msgstr ""
-#: ldmain.c:428 pe-dll.c:981
+#: ldmain.c:432 pe-dll.c:1085
#, c-format
msgid "%P: Error closing file `%s'\n"
msgstr ""
-#: ldmain.c:445
+#: ldmain.c:449
#, c-format
msgid "%s: total time in link: %ld.%06ld\n"
msgstr ""
-#: ldmain.c:448
+#: ldmain.c:452
#, c-format
msgid "%s: data size %ld\n"
msgstr ""
-#: ldmain.c:489
+#: ldmain.c:493
msgid "%P%F: missing argument to -m\n"
msgstr ""
-#: ldmain.c:603 ldmain.c:624 ldmain.c:655
+#: ldmain.c:607 ldmain.c:628 ldmain.c:659
msgid "%P%F: bfd_hash_table_init failed: %E\n"
msgstr ""
-#: ldmain.c:608 ldmain.c:627
+#: ldmain.c:612 ldmain.c:631
msgid "%P%F: bfd_hash_lookup failed: %E\n"
msgstr ""
-#: ldmain.c:642
+#: ldmain.c:646
msgid "%X%P: error: duplicate retain-symbols-file\n"
msgstr ""
-#: ldmain.c:686
+#: ldmain.c:690
msgid "%P%F: bfd_hash_lookup for insertion failed: %E\n"
msgstr ""
-#: ldmain.c:691
+#: ldmain.c:695
msgid "%P: `-retain-symbols-file' overrides `-s' and `-S'\n"
msgstr ""
-#: ldmain.c:768
+#: ldmain.c:772
msgid "Archive member included"
msgstr ""
-#: ldmain.c:769
+#: ldmain.c:773
msgid "because of file (symbol)"
msgstr ""
-#: ldmain.c:841
+#: ldmain.c:845
msgid "%X%C: multiple definition of `%T'\n"
msgstr ""
-#: ldmain.c:844
+#: ldmain.c:848
msgid "%D: first defined here\n"
msgstr ""
-#: ldmain.c:873
+#: ldmain.c:877
msgid "%B: warning: definition of `%T' overriding common\n"
msgstr ""
-#: ldmain.c:876
+#: ldmain.c:880
msgid "%B: warning: common is here\n"
msgstr ""
-#: ldmain.c:883
+#: ldmain.c:887
msgid "%B: warning: common of `%T' overridden by definition\n"
msgstr ""
-#: ldmain.c:886
+#: ldmain.c:890
msgid "%B: warning: defined here\n"
msgstr ""
-#: ldmain.c:893
+#: ldmain.c:897
msgid "%B: warning: common of `%T' overridden by larger common\n"
msgstr ""
-#: ldmain.c:896
+#: ldmain.c:900
msgid "%B: warning: larger common is here\n"
msgstr ""
-#: ldmain.c:900
+#: ldmain.c:904
msgid "%B: warning: common of `%T' overriding smaller common\n"
msgstr ""
-#: ldmain.c:903
+#: ldmain.c:907
msgid "%B: warning: smaller common is here\n"
msgstr ""
-#: ldmain.c:907
+#: ldmain.c:911
msgid "%B: warning: multiple common of `%T'\n"
msgstr ""
-#: ldmain.c:909
+#: ldmain.c:913
msgid "%B: warning: previous common is here\n"
msgstr ""
-#: ldmain.c:931 ldmain.c:970
+#: ldmain.c:935 ldmain.c:974
msgid "%P: warning: global constructor %s used\n"
msgstr ""
-#: ldmain.c:980
+#: ldmain.c:984
msgid "%P%F: BFD backend error: BFD_RELOC_CTOR unsupported\n"
msgstr ""
-#: ldmain.c:1166
+#: ldmain.c:1170
msgid "%F%P: bfd_hash_table_init failed: %E\n"
msgstr ""
-#: ldmain.c:1173
+#: ldmain.c:1177
msgid "%F%P: bfd_hash_lookup failed: %E\n"
msgstr ""
-#: ldmain.c:1192
+#: ldmain.c:1196
msgid "%X%C: undefined reference to `%T'\n"
msgstr ""
-#: ldmain.c:1195
+#: ldmain.c:1199
msgid "%D: more undefined references to `%T' follow\n"
msgstr ""
-#: ldmain.c:1201
+#: ldmain.c:1205
msgid "%X%B: undefined reference to `%T'\n"
msgstr ""
-#: ldmain.c:1204
+#: ldmain.c:1208
msgid "%B: more undefined references to `%T' follow\n"
msgstr ""
-#: ldmain.c:1225 ldmain.c:1247 ldmain.c:1267
+#: ldmain.c:1229 ldmain.c:1251 ldmain.c:1271
msgid "%P%X: generated"
msgstr ""
-#: ldmain.c:1228
+#: ldmain.c:1232
msgid " relocation truncated to fit: %s %T"
msgstr ""
-#: ldmain.c:1250
+#: ldmain.c:1254
#, c-format
msgid "dangerous relocation: %s\n"
msgstr ""
-#: ldmain.c:1270
+#: ldmain.c:1274
msgid " reloc refers to symbol `%T' which is not being output\n"
msgstr ""
msgid "%F%P: internal error %s %d\n"
msgstr ""
+#: ldmisc.c:550
+msgid "%P: internal error: aborting at %s line %d in %s\n"
+msgstr ""
+
+#: ldmisc.c:553
+msgid "%P: internal error: aborting at %s line %d\n"
+msgstr ""
+
+#: ldmisc.c:555
+msgid "%P%F: please report this bug\n"
+msgstr ""
+
#: ldver.c:35
#, c-format
msgid "GNU ld version %s (with BFD %s)\n"
msgstr ""
-#: ldver.c:42 lexsup.c:872
+#: ldver.c:42 lexsup.c:887
msgid " Supported emulations:\n"
msgstr ""
msgid "%F%P: final link failed: %E\n"
msgstr ""
-#: lexsup.c:152 lexsup.c:235 lexsup.c:241
+#: lexsup.c:155 lexsup.c:238 lexsup.c:244
msgid "KEYWORD"
msgstr ""
-#: lexsup.c:152
+#: lexsup.c:155
msgid "Shared library control for HP/UX compatibility"
msgstr ""
-#: lexsup.c:155
+#: lexsup.c:158
msgid "ARCH"
msgstr ""
-#: lexsup.c:155
+#: lexsup.c:158
msgid "Set architecture"
msgstr ""
-#: lexsup.c:157 lexsup.c:300
+#: lexsup.c:160 lexsup.c:307
msgid "TARGET"
msgstr ""
-#: lexsup.c:157
+#: lexsup.c:160
msgid "Specify target for following input files"
msgstr ""
-#: lexsup.c:159 lexsup.c:198 lexsup.c:208 lexsup.c:217 lexsup.c:284
-#: lexsup.c:307 lexsup.c:341
+#: lexsup.c:162 lexsup.c:201 lexsup.c:211 lexsup.c:220 lexsup.c:291
+#: lexsup.c:314 lexsup.c:348
msgid "FILE"
msgstr ""
-#: lexsup.c:159
+#: lexsup.c:162
msgid "Read MRI format linker script"
msgstr ""
-#: lexsup.c:161
+#: lexsup.c:164
msgid "Force common symbols to be defined"
msgstr ""
-#: lexsup.c:165 lexsup.c:331 lexsup.c:333 lexsup.c:335
+#: lexsup.c:168 lexsup.c:338 lexsup.c:340 lexsup.c:342
msgid "ADDRESS"
msgstr ""
-#: lexsup.c:165
+#: lexsup.c:168
msgid "Set start address"
msgstr ""
-#: lexsup.c:167
+#: lexsup.c:170
msgid "Export all dynamic symbols"
msgstr ""
-#: lexsup.c:169
+#: lexsup.c:172
msgid "Link big-endian objects"
msgstr ""
-#: lexsup.c:171
+#: lexsup.c:174
msgid "Link little-endian objects"
msgstr ""
-#: lexsup.c:173 lexsup.c:176
+#: lexsup.c:176 lexsup.c:179
msgid "SHLIB"
msgstr ""
-#: lexsup.c:173
+#: lexsup.c:176
msgid "Auxiliary filter for shared object symbol table"
msgstr ""
-#: lexsup.c:176
+#: lexsup.c:179
msgid "Filter for shared object symbol table"
msgstr ""
-#: lexsup.c:178
+#: lexsup.c:181
msgid "Ignored"
msgstr ""
-#: lexsup.c:180
+#: lexsup.c:183
msgid "SIZE"
msgstr ""
-#: lexsup.c:180
+#: lexsup.c:183
msgid "Small data size (if no size, same as --shared)"
msgstr ""
-#: lexsup.c:183
+#: lexsup.c:186
msgid "FILENAME"
msgstr ""
-#: lexsup.c:183
+#: lexsup.c:186
msgid "Set internal name of shared library"
msgstr ""
-#: lexsup.c:185
+#: lexsup.c:188
msgid "LIBNAME"
msgstr ""
-#: lexsup.c:185
+#: lexsup.c:188
msgid "Search for library LIBNAME"
msgstr ""
-#: lexsup.c:187
+#: lexsup.c:190
msgid "DIRECTORY"
msgstr ""
-#: lexsup.c:187
+#: lexsup.c:190
msgid "Add DIRECTORY to library search path"
msgstr ""
-#: lexsup.c:189
+#: lexsup.c:192
msgid "EMULATION"
msgstr ""
-#: lexsup.c:189
+#: lexsup.c:192
msgid "Set emulation"
msgstr ""
-#: lexsup.c:191
+#: lexsup.c:194
msgid "Print map file on standard output"
msgstr ""
-#: lexsup.c:193
+#: lexsup.c:196
msgid "Do not page align data"
msgstr ""
-#: lexsup.c:195
+#: lexsup.c:198
msgid "Do not page align data, do not make text readonly"
msgstr ""
-#: lexsup.c:198
+#: lexsup.c:201
msgid "Set output file name"
msgstr ""
-#: lexsup.c:200
+#: lexsup.c:203
msgid "Optimize output file"
msgstr ""
-#: lexsup.c:202
+#: lexsup.c:205
msgid "Ignored for SVR4 compatibility"
msgstr ""
-#: lexsup.c:204
+#: lexsup.c:207
msgid "Generate relocateable output"
msgstr ""
-#: lexsup.c:208
+#: lexsup.c:211
msgid "Just link symbols (if directory, same as --rpath)"
msgstr ""
-#: lexsup.c:211
+#: lexsup.c:214
msgid "Strip all symbols"
msgstr ""
-#: lexsup.c:213
+#: lexsup.c:216
msgid "Strip debugging symbols"
msgstr ""
-#: lexsup.c:215
+#: lexsup.c:218
msgid "Trace file opens"
msgstr ""
-#: lexsup.c:217
+#: lexsup.c:220
msgid "Read linker script"
msgstr ""
-#: lexsup.c:219 lexsup.c:231 lexsup.c:327 lexsup.c:344 lexsup.c:361
+#: lexsup.c:222 lexsup.c:234 lexsup.c:277 lexsup.c:289 lexsup.c:334
+#: lexsup.c:351 lexsup.c:368
msgid "SYMBOL"
msgstr ""
-#: lexsup.c:219
+#: lexsup.c:222
msgid "Start with undefined reference to SYMBOL"
msgstr ""
-#: lexsup.c:221
+#: lexsup.c:224
msgid "Build global constructor/destructor tables"
msgstr ""
-#: lexsup.c:223
+#: lexsup.c:226
msgid "Print version information"
msgstr ""
-#: lexsup.c:225
+#: lexsup.c:228
msgid "Print version and emulation information"
msgstr ""
-#: lexsup.c:227
+#: lexsup.c:230
msgid "Discard all local symbols"
msgstr ""
-#: lexsup.c:229
+#: lexsup.c:232
msgid "Discard temporary local symbols"
msgstr ""
-#: lexsup.c:231
+#: lexsup.c:234
msgid "Trace mentions of SYMBOL"
msgstr ""
-#: lexsup.c:233 lexsup.c:309 lexsup.c:311
+#: lexsup.c:236 lexsup.c:316 lexsup.c:318
msgid "PATH"
msgstr ""
-#: lexsup.c:233
+#: lexsup.c:236
msgid "Default search path for Solaris compatibility"
msgstr ""
-#: lexsup.c:235
+#: lexsup.c:238
msgid "Ignored for Solaris compatibility"
msgstr ""
-#: lexsup.c:237
+#: lexsup.c:240
msgid "Start a group"
msgstr ""
-#: lexsup.c:239
+#: lexsup.c:242
msgid "End a group"
msgstr ""
-#: lexsup.c:241
+#: lexsup.c:244
msgid "Ignored for SunOS compatibility"
msgstr ""
-#: lexsup.c:243
+#: lexsup.c:246
msgid "Link against shared libraries"
msgstr ""
-#: lexsup.c:249
+#: lexsup.c:252
msgid "Do not link against shared libraries"
msgstr ""
-#: lexsup.c:257
+#: lexsup.c:260
msgid "Bind global references locally"
msgstr ""
-#: lexsup.c:259
+#: lexsup.c:262
msgid "Check section addresses for overlaps (default)"
msgstr ""
-#: lexsup.c:261
+#: lexsup.c:264
msgid "Do not check section addresses for overlaps"
msgstr ""
-#: lexsup.c:264
+#: lexsup.c:267
msgid "Output cross reference table"
msgstr ""
-#: lexsup.c:266
+#: lexsup.c:269
msgid "SYMBOL=EXPRESSION"
msgstr ""
-#: lexsup.c:266
+#: lexsup.c:269
msgid "Define a symbol"
msgstr ""
-#: lexsup.c:268
+#: lexsup.c:271
msgid "Demangle symbol names"
msgstr ""
-#: lexsup.c:270
+#: lexsup.c:273
msgid "PROGRAM"
msgstr ""
-#: lexsup.c:270
+#: lexsup.c:273
msgid "Set the dynamic linker to use"
msgstr ""
-#: lexsup.c:272
+#: lexsup.c:275
msgid "Generate embedded relocs"
msgstr ""
-#: lexsup.c:274
+#: lexsup.c:277
+msgid "Call SYMBOL at unload-time"
+msgstr ""
+
+#: lexsup.c:279
msgid "Force generation of file with .exe suffix"
msgstr ""
-#: lexsup.c:276
+#: lexsup.c:281
msgid "Remove unused sections (on some targets)"
msgstr ""
-#: lexsup.c:279
+#: lexsup.c:284
msgid "Don't remove unused sections (default)"
msgstr ""
-#: lexsup.c:282
+#: lexsup.c:287
msgid "Print option help"
msgstr ""
-#: lexsup.c:284
+#: lexsup.c:289
+msgid "Call SYMBOL at load-time"
+msgstr ""
+
+#: lexsup.c:291
msgid "Write a map file"
msgstr ""
-#: lexsup.c:286
+#: lexsup.c:293
msgid "Do not demangle symbol names"
msgstr ""
-#: lexsup.c:288
+#: lexsup.c:295
msgid "Use less memory and more disk I/O"
msgstr ""
-#: lexsup.c:290
+#: lexsup.c:297
msgid "Allow no undefined symbols"
msgstr ""
-#: lexsup.c:292
+#: lexsup.c:299
msgid "Don't warn about mismatched input files"
msgstr ""
-#: lexsup.c:294
+#: lexsup.c:301
msgid "Turn off --whole-archive"
msgstr ""
-#: lexsup.c:296
+#: lexsup.c:303
msgid "Create an output file even if errors occur"
msgstr ""
-#: lexsup.c:300
+#: lexsup.c:307
msgid "Specify target of output file"
msgstr ""
-#: lexsup.c:302
+#: lexsup.c:309
msgid "Ignored for Linux compatibility"
msgstr ""
-#: lexsup.c:304
+#: lexsup.c:311
msgid "Relax branches on certain targets"
msgstr ""
-#: lexsup.c:307
+#: lexsup.c:314
msgid "Keep only symbols listed in FILE"
msgstr ""
-#: lexsup.c:309
+#: lexsup.c:316
msgid "Set runtime shared library search path"
msgstr ""
-#: lexsup.c:311
+#: lexsup.c:318
msgid "Set link time shared library search path"
msgstr ""
-#: lexsup.c:313
+#: lexsup.c:320
msgid "Create a shared library"
msgstr ""
-#: lexsup.c:317
+#: lexsup.c:324
msgid "Sort common symbols by size"
msgstr ""
-#: lexsup.c:321
+#: lexsup.c:328
msgid "Split output sections for each file"
msgstr ""
-#: lexsup.c:323
+#: lexsup.c:330
msgid "COUNT"
msgstr ""
-#: lexsup.c:323
+#: lexsup.c:330
msgid "Split output sections every COUNT relocs"
msgstr ""
-#: lexsup.c:325
+#: lexsup.c:332
msgid "Print memory usage statistics"
msgstr ""
-#: lexsup.c:327
+#: lexsup.c:334
msgid "Do task level linking"
msgstr ""
-#: lexsup.c:329
+#: lexsup.c:336
msgid "Use same format as native linker"
msgstr ""
-#: lexsup.c:331
+#: lexsup.c:338
msgid "Set address of .bss section"
msgstr ""
-#: lexsup.c:333
+#: lexsup.c:340
msgid "Set address of .data section"
msgstr ""
-#: lexsup.c:335
+#: lexsup.c:342
msgid "Set address of .text section"
msgstr ""
-#: lexsup.c:337
+#: lexsup.c:344
msgid "Output lots of information during link"
msgstr ""
-#: lexsup.c:341
+#: lexsup.c:348
msgid "Read version information script"
msgstr ""
-#: lexsup.c:344
+#: lexsup.c:351
msgid ""
"Take export symbols list from .exports, using\n"
"\t\t\t\tSYMBOL as the version."
msgstr ""
-#: lexsup.c:347
+#: lexsup.c:354
msgid "Warn about duplicate common symbols"
msgstr ""
-#: lexsup.c:349
+#: lexsup.c:356
msgid "Warn if global constructors/destructors are seen"
msgstr ""
-#: lexsup.c:352
+#: lexsup.c:359
msgid "Warn if the multiple GP values are used"
msgstr ""
-#: lexsup.c:354
+#: lexsup.c:361
msgid "Warn only once per undefined symbol"
msgstr ""
-#: lexsup.c:356
+#: lexsup.c:363
msgid "Warn if start of section changes due to alignment"
msgstr ""
-#: lexsup.c:359
+#: lexsup.c:366
msgid "Include all objects from following archives"
msgstr ""
-#: lexsup.c:361
+#: lexsup.c:368
msgid "Use wrapper functions for SYMBOL"
msgstr ""
-#: lexsup.c:363
+#: lexsup.c:370
msgid "[=WORDS]"
msgstr ""
-#: lexsup.c:363
+#: lexsup.c:370
msgid ""
"Modify problematic branches in last WORDS (1-10,\n"
"\t\t\t\tdefault 5) words of a page"
msgstr ""
-#: lexsup.c:525
+#: lexsup.c:520
+#, c-format
+msgid "%s: use the --help option for usage information\n"
+msgstr ""
+
+#: lexsup.c:540
msgid "%P%F: unrecognized -a option `%s'\n"
msgstr ""
-#: lexsup.c:538
+#: lexsup.c:553
msgid "%P%F: unrecognized -assert option `%s'\n"
msgstr ""
-#: lexsup.c:629
+#: lexsup.c:644
msgid "%P%F: invalid number `%s'\n"
msgstr ""
-#: lexsup.c:801
+#: lexsup.c:816
msgid "%P%F: -shared not supported\n"
msgstr ""
-#: lexsup.c:865
+#: lexsup.c:880
msgid "Copyright 1997 Free Software Foundation, Inc.\n"
msgstr ""
-#: lexsup.c:866
+#: lexsup.c:881
msgid ""
"This program is free software; you may redistribute it under the terms of\n"
"the GNU General Public License. This program has absolutely no warranty.\n"
msgstr ""
-#: lexsup.c:957
+#: lexsup.c:972
#, c-format
msgid "%s: may not nest groups (--help for usage)\n"
msgstr ""
-#: lexsup.c:968
+#: lexsup.c:983
#, c-format
msgid "%s: group ended before it began (--help for usage)\n"
msgstr ""
-#: lexsup.c:984
-msgid "Invalid argument to option \"mpc860c0\"\n"
+#: lexsup.c:1000
+#, c-format
+msgid "%s: Invalid argument to option \"mpc860c0\"\n"
msgstr ""
-#: lexsup.c:1031
+#: lexsup.c:1056
msgid "%P%F: invalid hex number `%s'\n"
msgstr ""
-#: lexsup.c:1043
+#: lexsup.c:1068
#, c-format
msgid "Usage: %s [options] file...\n"
msgstr ""
-#: lexsup.c:1045
+#: lexsup.c:1070
msgid "Options:\n"
msgstr ""
-#: lexsup.c:1122
+#. Note: Various tools (such as libtool) depend upon the
+#. format of the listings below - do not change them.
+#: lexsup.c:1149
#, c-format
-msgid ""
-"%s: supported targets:\n"
-" "
+msgid "%s: supported targets:"
msgstr ""
-#: lexsup.c:1130
+#: lexsup.c:1157
#, c-format
-msgid ""
-"%s: supported emulations:\n"
-" "
+msgid "%s: supported emulations: "
msgstr ""
-#: lexsup.c:1135
+#: lexsup.c:1162
#, c-format
msgid "%s: emulation specific options:\n"
msgstr ""
-#: lexsup.c:1139
+#: lexsup.c:1166
msgid ""
"\n"
"Report bugs to bug-gnu-utils@gnu.org\n"
msgstr ""
-#: mri.c:342
+#: mri.c:343
msgid "%P%F: unknown format type %s\n"
msgstr ""
-#: pe-dll.c:114
+#: pe-dll.c:144
#, c-format
msgid "%XUnsupported PEI architecture: %s\n"
msgstr ""
-#: pe-dll.c:346
+#: pe-dll.c:377
#, c-format
msgid "%XError, duplicate EXPORT with oridinals: %s (%d vs %d)\n"
msgstr ""
-#: pe-dll.c:352
+#: pe-dll.c:384
#, c-format
msgid "Warning, duplicate EXPORT: %s\n"
msgstr ""
-#: pe-dll.c:405
+#: pe-dll.c:446
#, c-format
msgid "%XCannot export %s: symbol not defined\n"
msgstr ""
-#: pe-dll.c:411
+#: pe-dll.c:452
#, c-format
msgid "%XCannot export %s: symbol wrong type (%d vs %d)\n"
msgstr ""
-#: pe-dll.c:418
+#: pe-dll.c:459
#, c-format
msgid "%XCannot export %s: symbol not found\n"
msgstr ""
-#: pe-dll.c:543
+#: pe-dll.c:584
#, c-format
msgid "%XError, oridinal used twice: %d (%s vs %s)\n"
msgstr ""
-#: pe-dll.c:735
+#: pe-dll.c:834
#, c-format
msgid "%XError: %d-bit reloc in dll\n"
msgstr ""
-#: pe-dll.c:854
+#: pe-dll.c:958
#, c-format
msgid "%s: Can't open output def file %s\n"
msgstr ""
-#: pe-dll.c:976
+#: pe-dll.c:1080
msgid "; no contents available\n"
msgstr ""
-#: pe-dll.c:1428
+#: pe-dll.c:1569
#, c-format
msgid "%XCan't open .lib file: %s\n"
msgstr ""
-#: pe-dll.c:1433
+#: pe-dll.c:1574
#, c-format
msgid "Creating library file: %s\n"
msgstr ""
OSDN Git Service
