Add driver for Amazon's Annapurna Labs PCIe host controller. The
controller is based on DesignWare's IP.
The controller doesn't support accessing the Root Port's config space via
ECAM, so we obtain its base address via an AMZN0001 device.
Furthermore, the DesignWare PCIe controller doesn't filter out config
transactions sent to devices 1 and up on its bus, so they are filtered by
the driver.
All subordinate buses do support ECAM access.
Implementing specific PCI config access functions involves:
- Adding an init function to obtain the Root Port's base address from
an AMZN0001 device.
- Adding a new entry in the MCFG quirk array.
[bhelgaas: Note that there is no Kconfig option for this driver because it
is only intended for use with the generic ACPI host bridge driver. This
driver is only needed because the DesignWare IP doesn't completely support
ECAM access to the root bus.]
Link: https://lore.kernel.org/lkml/1553774276-24675-1-git-send-email-jonnyc@amazon.com
Co-developed-by: Vladimir Aerov <vaerov@amazon.com>
Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
Signed-off-by: Vladimir Aerov <vaerov@amazon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
S: Supported
F: drivers/pci/controller/
+PCIE DRIVER FOR ANNAPURNA LABS
+M: Jonathan Chocron <jonnyc@amazon.com>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: drivers/pci/controller/dwc/pcie-al.c
+
PCIE DRIVER FOR AMLOGIC MESON
M: Yue Wang <yue.wang@Amlogic.com>
L: linux-pci@vger.kernel.org
static struct mcfg_fixup mcfg_quirks[] = {
/* { OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, */
+#define AL_ECAM(table_id, rev, seg, ops) \
+ { "AMAZON", table_id, rev, seg, MCFG_BUS_ANY, ops }
+
+ AL_ECAM("GRAVITON", 0, 0, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 1, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 2, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 3, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 4, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 5, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 6, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 7, &al_pcie_ops),
+
#define QCOM_ECAM32(seg) \
{ "QCOM ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops }
# depending on whether ACPI, the DT driver, or both are enabled.
ifdef CONFIG_PCI
+obj-$(CONFIG_ARM64) += pcie-al.o
obj-$(CONFIG_ARM64) += pcie-hisi.o
endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Amazon's Annapurna Labs IP (used in chips
+ * such as Graviton and Alpine)
+ *
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Author: Jonathan Chocron <jonnyc@amazon.com>
+ */
+
+#include <linux/pci.h>
+#include <linux/pci-ecam.h>
+#include <linux/pci-acpi.h>
+#include "../../pci.h"
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+
+struct al_pcie_acpi {
+ void __iomem *dbi_base;
+};
+
+static void __iomem *al_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int where)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ struct al_pcie_acpi *pcie = cfg->priv;
+ void __iomem *dbi_base = pcie->dbi_base;
+
+ if (bus->number == cfg->busr.start) {
+ /*
+ * The DW PCIe core doesn't filter out transactions to other
+ * devices/functions on the root bus num, so we do this here.
+ */
+ if (PCI_SLOT(devfn) > 0)
+ return NULL;
+ else
+ return dbi_base + where;
+ }
+
+ return pci_ecam_map_bus(bus, devfn, where);
+}
+
+static int al_pcie_init(struct pci_config_window *cfg)
+{
+ struct device *dev = cfg->parent;
+ struct acpi_device *adev = to_acpi_device(dev);
+ struct acpi_pci_root *root = acpi_driver_data(adev);
+ struct al_pcie_acpi *al_pcie;
+ struct resource *res;
+ int ret;
+
+ al_pcie = devm_kzalloc(dev, sizeof(*al_pcie), GFP_KERNEL);
+ if (!al_pcie)
+ return -ENOMEM;
+
+ res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL);
+ if (!res)
+ return -ENOMEM;
+
+ ret = acpi_get_rc_resources(dev, "AMZN0001", root->segment, res);
+ if (ret) {
+ dev_err(dev, "can't get rc dbi base address for SEG %d\n",
+ root->segment);
+ return ret;
+ }
+
+ dev_dbg(dev, "Root port dbi res: %pR\n", res);
+
+ al_pcie->dbi_base = devm_pci_remap_cfg_resource(dev, res);
+ if (IS_ERR(al_pcie->dbi_base)) {
+ long err = PTR_ERR(al_pcie->dbi_base);
+
+ dev_err(dev, "couldn't remap dbi base %pR (err:%ld)\n",
+ res, err);
+ return err;
+ }
+
+ cfg->priv = al_pcie;
+
+ return 0;
+}
+
+struct pci_ecam_ops al_pcie_ops = {
+ .bus_shift = 20,
+ .init = al_pcie_init,
+ .pci_ops = {
+ .map_bus = al_pcie_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+ }
+};
+
+#endif /* defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) */
extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */
extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 */
extern struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
+extern struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */
#endif
#ifdef CONFIG_PCI_HOST_COMMON
OSDN Git Service
